Silicon Laboratories CP2105 Manuel utilisateur

CP2105-EK

CP2105 EVALUATION KIT USER’SGUIDE

1. Kit Contents

The CP2105 Evaluation Kit contains the following items:

CP2105 Evaluation Board

RS232 Serial Cable

USB Cable

DVD

Quick Start Guide

2. Relevant Documentation

Application notes can be found on the Interface Application Notes page for all fixed-function devices:

www.silabs.com/interface-appnotes.

AN721: CP210x/CP211x Device Customization Guide — Customize the VID, PID, serial number, and

other parameters stored in the CP2105 one-time programmable ROM.

AN197: Serial Communications Guide for CP210x — Programming guide for using the Virtual COM Port

(VCP) drivers.

AN169: USBXpress Programmer’s Guide — Programming guide for using the USBXpress drivers.

AN220: C8051F32x and CP210x USB Driver Customization — VCP or USBXpress driver customization

tool.

AN223: Port Configuration and GPIO for CP210x — Programming guide and DLL for runtime control of

the CP2105 GPIO pins.

AN571: CP210x Virtual COM Port Interface — USB interface details for CP210x devices.

3. Software Setup

The Software Development Kit (SDK) for the CP2105 kit is included on the kit DVD. The latest version of this

installer can also be downloaded from the www.silabs.com/interface-software website. This package includes:

Device Customization Utility (AN721)

Documentation —data sheet, application notes, user’s guide, quick start guide, etc.

CP210x Virtual COM Port (VCP) Drivers

Software — Driver Customization Utility (AN220) and programming examples

The Windows installer should launch automatically after inserting the DVD. For Mac and Linux, browse to the

appropriate directory on the DVD to install the software package. Follow the instructions to install the SDK and

drivers to the system.

3.1. USBXpress Driver Development Kit

The Silicon Laboratories USBXpress

Development Kit provides a complete host software solution for interfacing to

CP210x devices. No USB protocol or host device driver expertise is required. Instead, a simple, high-level Application

Program Interface (API) for the host software is used to provide complete USB connectivity. The USBXpress

Development Kit includes Windows device drivers, Windows device driver installer, host interface function library

(host API) provided in the form of a Windows Dynamic Link Library (DLL). See Application Note AN169, “USBXpress

Programmer’s Guide” for detailed information on using the USBXpress drivers.

The USBXpress drivers are available here: www.silabs.com/usbxpress.

Click the USBXpress Development Kit link in the Download for Windows 2000/XP/Server 2003/Vista/Win7 section

to download the USBXpress drivers. Run the installer and follow the steps to install the software to the desired

CP2105-EK

2 Rev. 0.5

location. The default installation directory is C:\SiLabs\MCU\USBXpress_SDK.

Further installation instructions for the WinCE drivers can be found in the ReadMe.txt file contained inside the

driver package.

4. CP2105 Hardware Interface

The evaluation board is connected to a PC as shown in Figure 1.

1. Connect one end of the USB cable to a USB Port on the PC.

2. Connect the other end of the USB cable to the USB connector on the

CP2105 evaluation board.

3. Connect one end of the RS232 serial cable to the DB-9 connector on the

CP2105 evaluation board

4. Connect the other end of the RS232 serial cable to the target serial device.

5. (Optional) Connect the second RS232 serial cable to the second DB-9 connector on the

CP2105 evaluation

board.

6. (Optional) Connect the other end of the second RS232 serial cable to the second target serial device.

Figure 1. Hardware Setup

CP2105 EK

Serial Device

RS232

USB

Serial Device

RS232

CP2105 USB-to-

UART Bridge

CP2105-EK

Rev. 0.5 3

5. CP2105 Software Interface

If the Virtual COM Port drivers are used, the CP2105 will appear as two COM ports in the Device Manager, as

shown in Figure 2. The CP2105 will always use the lowest available COM ports for operation. For instance, if COM

ports 1 and 2 are in use by other peripherals and applications, the CP2105 will use COM 3 and COM 4.

The CP2105 functions identically to two COM ports from the reference point of both the host application and the

serial devices, and it can support serial device control requests defined in the Microsoft Win32®Communications

API. Examples for how to communicate with the device as two serial COM ports are included in AN197 on the

www.silabs.com/interface-appnotes page or in the SDK.

If the USBXpress drivers are used, the CP2105 will appear as two USB USBXpress devices as shown in Figure 2.

Examples for how to communicate with the device using the USBXpress interface are included in AN169 on the

www.silabs.com/interface-appnotes page.

Figure 2. CP2105 in Device Manager

CP2105-EK

4 Rev. 0.5

6. Target Board

The

CP2105

Evaluation Kit includes an evaluation board with a

CP2105

device preinstalled for evaluation and pre-

liminary software development. Numerous input/output (I/O) connections are provided to facilitate prototyping using

the evaluation board. Refer to

Figure 3

for the locations of the various I/O connectors.

P1 USB connector for USB interface

P2 DB9 connector for Standard RS232 interface

P3 DB9 connector for Enhanced RS232 interface

J1 Enhanced UART signal access connector

J2, J3 GPIO access connector

J4 Power connector

J6 Standard UART signal access connector

J7, J8 SUSPEND LED source connector

DSS–DS4 Green GPIO LEDs

DS5 Red SUSPEND indicator LED

Figure 3. CP2105 Evaluation Board with Default Shorting Blocks Installed

6.1. LED Headers (J2, J3)

Connectors J2 and J3 are provided to allow access to the GPIO pins on the CP2105 when in GPIO mode. Place

shorting blocks on J2 and J3 to connect the GPIO pins to the five green LEDs DS0–DS4. These LEDs can be used

to indicate active communications through the CP2105. Table 1 shows the LED corresponding to each header

position. When using the CP2105 in Modem mode, the shorting blocks on J2 and J3 should be removed.

Table 1. J2 and J3 LED Locations

LED Pins

DS0 J2[1:2]

DS1 J2[3:4]

DS2 J3[1:2]

DS3 J3[3:4]

DS4 J3[5:6]

CP2105

SUSPEND LED

Pin 2

Pin 1

______

DS5

RS232

Transceiver

Pin 1

RS232

Transceiver

P3CP2105-EK

Standard

Enhanced

Pin 2 J8

DS0

DS1

DS2

DS3

DS4

CP2105-EK

Rev. 0.5 5

6.2. Universal Serial Bus (USB) Interface (P1)

A Universal Serial Bus (USB) connector (P1) is provided to facilitate connections to the USB interface on the

CP2105. See Table 2 for the USB pin definitions.

6.3. UART Signals (P2, P3, J1, J6)

Two RS232 transceiver circuits and DB-9 connectors (P2, P3) are provided on the evaluation board to connect the

CP2105 virtual serial ports to external serial devices. See Table 3 for the RS232 P2 and P3 pin descriptions. The

J2 and J6 connectors are provided to facilitate direct access to the CP2105’s UART signals. Shorting blocks on J1

are required to connect the Standard UART signals to P2, and the shorting blocks on J6 are required to connect

the Enhanced UART signals to P3. See Table 4 for J1 and J6 pin descriptions.

Table 2. USB Connector Pin Descriptions

Pin # Description

1 VBUS

2D-

3D+

4 GND (Ground)

Table 3. RS232 Pin Descriptions

Pin Signal CP2105

Direction Description

1 DCD Input Data Carrier Detect

2 RXD Input Receive Data

3 TXD Output Transmit Data

4 DTR Output Data Terminal Ready

5 GND Ground

6 DSR Input Data Set Ready

7 RTS Output Request to Send

8 CTS Input Clear to Send

9 RI Input Ring Indicator

Table 4. J1, J6 Pin Descriptions

Pins Signal CP2105

Direction Description

1-2 TXD Output Transmit Data

3-4 RXD Input Receive Data

5-6 DTR Output Data Terminal Ready

7-8 RI Input Ring Indicator

9-10 DCD Input Data Carrier Detect

11-12 DSR Input Data Set Ready

13-14 CTS Input Clear to Send

15-16 RTS Output Request to Send

CP2105-EK

6 Rev. 0.5

6.4. Power Connector (J4)

This header (J4) is included on the evaluation board to provide several power options. The following describes the

functions of the pins.

Pins 1–2 connect CP2105 VIO input (Pin 5) to CP2105 VDD (Pin 6). Remove the shorting block to power

VIO from an external source.

Pins 3–4 connect the main +3 V net to the CP2105 VDD (Pin 6). The main +3 V net powers the other

components (five green LEDs and RS-232 Sipex Part) on the board.

6.5. SUSPEND LED Source Selector(J7, J8)

These headers (J7, J8) are included on the evaluation board to provide several options for the SUSPEND LED

source. The following describes the function of each pin:

J7[1:2] connects CP2105 Standard UART SUSPEND output (Pin 1) to the SUSPEND LED.

J7[2:3] connects CP2105 Enhanced UART SUSPEND output (Pin 17) to the SUSPEND LED.

J7[2]:J8[1] connects the main +3 V net to the SUSPEND LED. This will cause the SUSPEND LED to act as

a power LED.

CP2105-EK

Rev. 0.5 7

7. Schematic

Figure 4. CP2105 Evaluation Board Schematic

CP2105-EK

8 Rev. 0.5

DOCUMENT CHANGE LIST

Revision 0.1 to Revision 0.2

Updated Windows installation instructions for VCP

drivers.

Updated Windows installation instructions for

USBXpress drivers.

Revision 0.2 to Revision 0.3

Updated Figure 3 with shorting blocks installed.

Revision 0.3 to Revision 0.4

Updated "Figure 2. CP2105 in Device Manager" on

page 3.

Revision 0.4 to Revision 0.5

Updated “1. Kit Contents” to change CD-ROM to

DVD.

Added “2. Relevant Documentation”.

Updated “3. Software Setup” to point to the drivers

on the website.

Updated Figure 1 and Figure 2.

CP2105-EK

Rev. 0.5 9

NOTES:

CP2105-EK

10 Rev. 0.5

CONTACT INFORMATION

Silicon Laboratories Inc.

400 West Cesar Chavez

Austin, TX 78701

Tel: 1+(512) 416-8500

Fax: 1+(512) 416-9669

Toll Free: 1+(877) 444-3032

Please visit the Silicon Labs Technical Support web page:

https://www.silabs.com/support/pages/contacttechnicalsupport.aspx

and register to submit a technical support request.

Patent Notice

Silicon Labs invests in research and development to help our customers differentiate in the market with innovative low-power, small size, analog-

intensive mixed-signal solutions. Silicon Labs' extensive patent portfolio is a testament to our unique approach and world-class engineering team.

Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc.

Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders.

The information in this document is believed to be accurate in all respects at the time of publication but is subject to change without notice.

Silicon Laboratories assumes no responsibility for errors and omissions, and disclaims responsibility for any consequences resulting from

theuseofinformationincludedherein.Additionally,SiliconLaboratoriesassumesnoresponsibilityforthefunctioningofundescribed features

or parameters. Silicon Laboratories reserves the right to make changes without further notice. Silicon Laboratories makes no warranty, rep-

resentation or guarantee regarding the suitability of its products for any particular purpose, nor does Silicon Laboratories assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation conse-

quential or incidental damages. Silicon Laboratories products are not designed, intended, or authorized for use in applications intended to

support or sustain life, or for any other application in which the failure of the Silicon Laboratories product could create a situation where per-

sonal injury or death may occur. Should Buyer purchase or use Silicon Laboratories products for any such unintended or unauthorized ap-

plication, Buyer shall indemnify and hold Silicon Laboratories harmless against all claims and damages.

Autres manuels pour CP2105

Table des matières

Autres manuels Silicon Laboratories Carte mère

Silicon Laboratories

Silicon Laboratories Si5338 Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si47xx-EVB Series Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si53154-EVB Manuel utilisateur

Silicon Laboratories

Silicon Laboratories UG332 Manuel utilisateur

Silicon Laboratories

Silicon Laboratories SiTCXO1-EVB Manuel utilisateur

Silicon Laboratories

Silicon Laboratories EZR32HG Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si8284-EVB Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si2493/57/34/15/04-EVB Manuel utilisateur

Silicon Laboratories

Silicon Laboratories SLWRB4173A Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si3454-KIT Manuel utilisateur

Silicon Laboratories

Silicon Laboratories TS3300 Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si5338-EVB Manuel utilisateur

Silicon Laboratories

Silicon Laboratories CP2102N Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si514 Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si5386 Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si4827-DEMO Manuel utilisateur

Silicon Laboratories

Silicon Laboratories BB52 Explorer Kit Manuel utilisateur

Silicon Laboratories

Silicon Laboratories CP2112-EK Manuel utilisateur

Silicon Laboratories

Silicon Laboratories EFM8UB2-SLSTK2001A Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si5340-EVB Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si84xxISO Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si3460 Manuel utilisateur

Silicon Laboratories

Silicon Laboratories CP2102 Manuel utilisateur

Silicon Laboratories

Silicon Laboratories Si890x-PWR-EVB Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur