SIKA Type E Manuel utilisateur

Table des matières

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur

SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany 1/2

Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: [email protected], web: www.SIKA.net

Pressure Reference

Type E

USER MANUAL

Digital Manometer with Max.-/Min.-Display.

Accuracy: 0.5% FS typ.

The Reference Type E has two operating keys.

The left key is to turn the instrument on and

to execute its functions

(the functions appear successively on

the display as long as the key is pressed and

are executed when releasing the key).

The right key is used to switch between the MAX.-

and MIN.-value.

After turn-on, the instrument displays the pressure range

for two seconds before changing into the measuring mode.

The instrument has the following functions:

RESET: Max.-/Min.-value are set to the actual pressure

OFF: Turns off the instrument

ZERO: Sets a new Zero reference

CONT: Deactivates the automatic turn-off function

(this function is activated with factory settings,

meaning the instrument automatically turns off

15 min. after the last key function)

Notes:

1) If the ZERO- and/or CONT-function is activated, it is indicated on the display. In order to

reset the Zero to factory setting and/or to reactivate the automatic turn-off function, press

the left key until ZERO and/or CONT disappears.

2) If the actual pressure goes beyond the measuring range, OFL (overflow) appears on the

display.

SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany 2/2

Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: [email protected], web: www.SIKA.net

Installation:

The Reference Type E has 7/16” UNF male thread and is delivered complete with an O-ring seal

swivel fitting which allows Reference Type E to be rotated through 360°.

Only minimal tightness is needed to seal up to 350 bar. Process pressure connection

is G 1/4” male.

Battery Change:

When the battery starts weakening, a low battery warning (BAT LOW) will appear in the upper left

corner of the display. For battery change, open the battery compartment and change the battery

(type CR 2430). The battery life is 1400 hours in normal measuring mode.

Ranges / Calibration:

The factory setting of the Zero for the range -1…40 bar is at 0 bar absolute. For sealed gauge

pressure measurements, activate “ZERO SEt” at ambient pressure.

Instruments with the range 0…350 bar are calibrated in a sealed gauge mode with 1 bar absolute

pressure as a Zero reference.

Type E

Digital reference test gauge

Pressure medium fluids and gas media

Pressure connection G1/4'', male

Display multi-purpose LCD, 30 x 30 mm

Function keys 'SELECT' (reset, off, zero, cont) 'MIN/MAX'

Casing 70 x 100 x 30 mm (d x h x w), IP65, weight approx. 130 g, rubber cap

Power supply 3 V battery

1400 h service life continuous operation, LOW-BAT-display, AUTO-Off

Accuracy +/-0.5 % FS +/-1 digit

Measuring range

Resolution

Model A -1......30)40 bar

0.01 bar

Model B 0...(300)350 bar

0.1 bar

Option EEx ia IIC T5/T6 - 01ATEX6001X

Zwivel

process connection G1/4