SIGMA TEK CP 733 Manuel utilisateur

CP 733

S-DIAS CPU Unit

Instruction Manual

Date of creation: 06.12.2019

Version date: 26.07.2023

Article number: 20-004-733-E

Publisher: SIGMATEK GmbH & Co KG

A-5112 Lamprechtshausen

Tel.: +43/6274/4321

Fax: +43/6274/4321-18

Email: [email protected]

WWW.SIGMATEK-AUTOMATION.COM

SIGMATEK GmbH & Co KG

Translation of the Original Instructions

tributed in any form (print, photocopy, microfilm or in any other process) without express permission.

We reserve the right to make changes in the content without notice. SIGMATEK GmbH & Co KG is not responsible

for technical or printing errors in this handbook and assumes no responsibility for damages that occur through its

use.

S-DIAS CPU UNIT CP 733

26.07.2023 Page 1

S-DIAS CPU Unit CP 733

with 1 Ethernet

2 VARAN Out (2 VARAN Managers)

1 EtherCAT Drive Controller

1 CAN

1 USB 3.0

1 USB Device 2.0 (Micro USB Type B)

1 microSD Card

1 S-DIAS

The S-DIAS CPU unit 733 is an industrial PC with an Intel

Atom E3827 processor.

The CPU unit is used to control S-DIAS modules and has

various interface connections such as CAN, Gigabit Ether-

net, EtherCAT Drive Controller and with two VARAN Out

interfaces. 14 status LEDs directly on the CPU unit provide

current CPU status information. A microSD card can be

used to store program memory. The CP 733 provides two

independent VARAN Managers.

The CP 733 does not currently support visualization via VNC, LRM etc.

An ESI file is required for the use of a new EtherCAT Drive in the LASAL software. Please

contact SIGMATEK support to clarify whether the used Ether-CAT drive is already support-

ed.

CP 733 S-DIAS CPU UNIT 
 
Page 2 26.07.2023 
Contents 
1Introduction............................................................................. 5 
1.1 Target Group/Purpose of this Operating Manual......................5 
1.2 Important Reference Documentation .........................................5 
1.3 Contents of Delivery.....................................................................5 
2Basic Safety Directives .......................................................... 6 
2.1 Symbols Used...............................................................................6 
2.2 Disclaimer......................................................................................8 
2.3 General Safety Directives ............................................................9 
2.4 Software/Training .......................................................................10 
3Standards and Directives......................................................11 
3.1 Directives.....................................................................................11 
3.1.1 EU Conformity Declaration................................................................11 
4Type Plate...............................................................................12 
5Technical Data .......................................................................13 
5.1 Performance Data.......................................................................13 
5.2 Standard Configuration..............................................................14 
5.3 Electrical Requirements.............................................................15 
5.4 Temperature Sensor...................................................................16 
5.5 Miscellaneous .............................................................................17 
5.6 Environmental Conditions.........................................................17 

 S-DIAS CPU UNIT CP 733 
 
07.2023 Page 3 
6Mechanical Dimensions........................................................18 
7Connector Layout..................................................................19 
1 Connectors..................................................................................21 
2 Applicable Connectors...............................................................23 
8Wiring Guidelines..................................................................24 
1 Ground.........................................................................................24 
2 Shielding......................................................................................24 
3 ESD Protection............................................................................24 
9CAN Bus Setup......................................................................25 
1 CAN Bus Station Number ..........................................................25 
2 Number of CAN Bus Participants..............................................25 
3 CAN Bus Data Transfer Rate.....................................................26 
CAN Bus Termination ...........................................................27 
EtherCAT Feature Overview.................................................28 
Buffer Battery ........................................................................31 
Exchanging the Battery ........................................................32 
1 Exchanging the Battery: Option 1.............................................32 
2 Exchanging the Battery: Option 2.............................................33 
Process Diagram...................................................................34 

CP 733 S-DIAS CPU UNIT 
 
Page 4 26.07.2023 
Recommended Shielding......................................................35 
1 Wiring from the Control Cabinet to an External Component.36 
2 Wiring Outside of the Control Cabinet.....................................37 
3 Shielding for Wiring Within the Control Cabinet.....................38 
4 Connecting Noise Generating Components............................39 
5 Shielding Between Two Control Cabinets ...............................40 
Status and Error Messages...................................................41 
Assembly/Installation............................................................48 
1 Check Contents of Delivery.......................................................48 
2 Mounting......................................................................................49 
3 Dismounting................................................................................51 
Transport/Storage..................................................................53 
Storage ...................................................................................53 
Maintenance...........................................................................54 
1 Service.........................................................................................54 
2 Repair...........................................................................................54 
Disposal..................................................................................54 
 

S-DIAS CPU UNIT CP 733

26.07.2023 Page 5

1 Introduction

1.1 Target Group/Purpose of this Operating Manual

This operating manual contains all information required for the operation of the product.

This operating manual is intended for:

•Project planners

•Technicians

•Commissioning engineers

•Machine operators

•Maintenance/test technicians

General knowledge of automation technology is required.

Further help and training information, as well as the appropriate accessories can be found

on our website www.sigmatek-automation.com.

Our support team is happily available to answer your questions.

Please see our website for our hotline number and business hours.

1.2 Important Reference Documentation

This and additional documents can be downloaded from our website or obtained through

support.

1.3 Contents of Delivery

1x CP 733

CP 733 S-DIAS CPU UNIT

Page 6 26.07.2023

2 Basic Safety Directives

2.1 Symbols Used

The following symbols are used in the operator documentation for warning and danger

messages, as well as informational notes:

DANGER

Danger indicates that death or serious injury will occur, if the speci-

fied measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Danger indique une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

WARNING

Warning indicates that death or serious injury can occur, if the speci-

fied measures are not taken.

To avoid death or serious injuries, observe all guidelines.

Avertissement d’une situation dangereuse qui, faute de prendre les

mesures adéquates, entraînera des blessures graves, voire mortelles.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

CAUTION

Caution indicates that moderate to slight injury can occur, if the speci-

fied measures are not taken.

To avoid moderate to slight injuries, observe all guidelines.

Attention indique une situation dangereuse qui, faute de prendre les

mesures adéquates, peut entraîner des blessures assez graves ou

légères.

Respectez toutes les consignes pour éviter des blessures

graves, voire mortelles.

S-DIAS CPU UNIT CP 733

26.07.2023 Page 7

INFORMATION

Information

Provides important information on the product, handling or

relevant sections of the documentation, which require atten-

tion.

CP 733 S-DIAS CPU UNIT

Page 8 26.07.2023

2.2 Disclaimer

INFORMATION

The contents of this operating manual were prepared with the greatest

care. However, deviations cannot be ruled out. This operating manual

is regularly checked and required corrections are included in the sub-

sequent versions. The machine manufacturer is responsible for the

proper assembly, as well as device configuration. The machine opera-

tor is responsible for safe handling, as well as proper operation.

The current operating manual can be found on our website. If neces-

sary, contact our support.

Subject to technical changes, which improve the performance of the

devices. The following operating manual is purely a product descrip-

tion. It does not guarantee properties under the warranty.

Please thoroughly read the corresponding documents and this operat-

ing manual before handling a product.

SIGMATEK GmbH & Co KG is not liable for damages caused

through, non-compliance with these instructions or applicable

regulations.

Autres manuels pour CP 733

Table des matières

Autres manuels SIGMA TEK Matériel informatique

SIGMA TEK

SIGMA TEK C-IPC Manuel utilisateur

SIGMA TEK

SIGMA TEK CP 311 Manuel utilisateur

SIGMA TEK

SIGMA TEK C-DIAS CSCP 012 Manuel utilisateur

SIGMA TEK

SIGMA TEK CP 111-1 Manuel utilisateur

SIGMA TEK

SIGMA TEK CP 313 Manuel utilisateur

SIGMA TEK

SIGMA TEK S-DIAS SCP 111 Manuel utilisateur

SIGMA TEK

SIGMA TEK S-DIAS AI 084 Manuel utilisateur

SIGMA TEK

SIGMA TEK CCP 621 Manuel utilisateur

SIGMA TEK

SIGMA TEK FDD 3000 Manuel utilisateur

SIGMA TEK

SIGMA TEK CP 212-1 Manuel utilisateur

SIGMA TEK

SIGMA TEK CCP 521 Manuel utilisateur

SIGMA TEK

SIGMA TEK CP 731 Manuel utilisateur

SIGMA TEK

SIGMA TEK SIB 061 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur