Sigma mobile Comfort 50 Light Manuel utilisateur
Comfort 50 Light Dual SIM
Mobile phone
User manual
Notice：This document states the instruction regarding the
mobile. Information contained in this document is subject to
continuous update without further notice due to improvement
and update of products and technologies. Description in this
manual may be different from the mobile phone, when you
change the installed software, SIM card or service provider.
Thanks for your understand very much!
Security Precautions
To ensure that you can use your mobile phone safely and
effectively, read the following information carefully before
you use phone.
Safe Power-on
Do not use phone in places where mobile phones are
forbidden, or may cause interferences or dangers.
Traffic Safety First
Do not use phone while you drive.
Shut-down in Restricted Areas
Comply with related restriction rules or regulations. Shut
down the mobile phone on the airplane, or around inflammable
articles, chemicals, or medical appliances.
Interference
Mobile communication may be affected by radio
interferences, so the performance of phone is affected
accordingly.
Waterproof
This mobile phone is not waterproof. Keep it dry under
any situation.
Keep the Mobile Phone Out of Reach of Children
Phone and all its assemblies should be kept out of reach of
children.
Assemblies and Batteries
Please use the company designated the battery and charger,
Failure to comply with this rule may result in explosion of the
mobile phone.
Professional Service
Do not dissemble the mobile phone and its assemblies by
yourself. The mobile phone is serviced only by authorized
organizations.
Key Layout
This phone supports 2G networks:
GSM900/1800MHz.
Power-on and Power-off
When phone is in the power-off status, press
and hold the 【End key】 to power on
phone. When phone is in the standby status,
press and hold the 【End key 】 , to power
off phone.
Locking keypad
Lock the keypad in two ways:
Automatically locked: According to the
“Settings-Phone settings-Auto keypad lock”
menu, the phone is automatically locked by
the keypad lock time.
Manually locked:
In the standby screen, press 【Send Key】
and 【* Key】to enter the locked state.
Basic icons
Icon
Meaning
Network signal strength of SIM
Current battery capacity
There are unread short messages
on SIM
There are un-received calls on
SIM
There are forwarded calls on
SIM
The alarm is enabled
Keylock
Dial a call
On the standby screen, press keys on the
key board to enter the telephone number
directly.press 【Send key】 to dial up.
Search a number in the call records:
press 【Send key to dial up.
On the page of call records：
press【Send key】to dial.
Fast dial
Enter main menu>Phonebook>fast dial
Activate Fast Dial function if not active.
Populate Fas dial phone list.
To dial: On the standby screen, long press
number key, that corresponds to a number in
fast dial list.
SOS Call
You can set five emergency contacts. When
the 【SOS key】 is pressed and held for a
while, phone automatically sends short
messages to these contacting numbers
cyclically, until a call is accepted.
Receive a call
When there is an incoming call, perform the
following operations:
Press the 【Send key 】 to receive the
incoming call. If the earphone is inserted, you
are in the earphone mode and can receive the
incoming call by using the earphone.
Press 【End key】 to refuse the incoming
call.
Ring Tone
Start the function:
Select the “Settings ---> Ring Tone” menu to
set ring types and volumes for incoming calls,
message, alarms, keypad tones, alert type,
ring volume, ring type.
The current profile is the
standard profile.
The current profile is the
conference profile
Headset mode
Mute
Vibrate then ring
Vibrate and ring
Phonebook
Save a Number
Save a telephone number through one of the
following ways:
1. Save the number of a dialed call, a received
call or an un-received call to the phonebook.
2. Add a new telephone number directly in the
phonebook function.
Advanced Function
Fast dialup: You can define fast dialup
numbers for number keys 2-9 by adding them
from the phonebook or entering them
manually. After fast dialup numbers are
defined, you can press and hold a number key
to make fast dialup.
SMS Function
Read a Message
Read the short message through one of the
following two ways:
1. When a new message arrives under the
standby screen:
Read the short message on the SMS page.
Press 【Send key】 , press 【Up key】 or
【Down key】 to change lines.
2. Read a message from the inbox.
Select a short message from the inbox.
On the SMS page, you can press the dialup
key shortly to dial a call to the message
sender.
Function operations:
•Delete: Delete the selected short
messages.
•Reply: Respond to this short message.
•Forward: Forward the selected short
message to other contacting personnel.
•Advanced options: Call sender, Use the
number, copy or move the short message.
Write a Message
Start this function:
Enter this function from the Main menu,
Messages, Write message.
Note: On the SMS editing page, press the [#]
key to change the input method.
Save sent messages:
By default, sent messages are not saved. You
can select “SMS Settings ---> Common
Settings” to modify the configuration. Select
the option of the save sent message
FM
Autres manuels Sigma mobile Téléphone portable
Sigma mobile
Sigma mobile Smartphone X-treme PQ53 Manuel utilisateur
Sigma mobile
Sigma mobile X-treme PQ17 Manuel utilisateur
Sigma mobile
Sigma mobile X-treme PQ54 Manuel utilisateur
Sigma mobile
Sigma mobile X-treme PQ20 Manuel utilisateur
Sigma mobile
Sigma mobile X-treme IT67 Manuel utilisateur
Sigma mobile
Sigma mobile Comfort 50 Shell DUO Manuel utilisateur
Sigma mobile
Sigma mobile X-treme 3SIM Manuel utilisateur
Sigma mobile
Sigma mobile X-treme PQ39 Manuel utilisateur
Sigma mobile
Sigma mobile X-treme PQ27 Plus Manuel utilisateur
Sigma mobile
Sigma mobile Comfort 50 elegance3 SIMO Manuel utilisateur
Sigma mobile
Sigma mobile X-treme PQ36 Manuel utilisateur
Sigma mobile
Sigma mobile CF113 Manuel utilisateur
Sigma mobile
Sigma mobile X-treme ST68 Manuel utilisateur
Sigma mobile
Sigma mobile X-Style S5502 Manuel utilisateur
Sigma mobile
Sigma mobile X-treme IT67m Manuel utilisateur
Sigma mobile
Sigma mobile X-TREME PQ38 Manuel utilisateur
Sigma mobile
Sigma mobile X-treme PQ37 Manuel utilisateur
Sigma mobile
Sigma mobile Comfort 50 Grand Manuel utilisateur
Sigma mobile
Sigma mobile X-treme PQ52 Manuel utilisateur
Sigma mobile
Sigma mobile X-treme PQ39 Manuel utilisateur
