SIGLENT SDS2000X Plus Series Manuel utilisateur
QS0102XP_E01B
Quick Start
SDS2000X Plus
Digital Storage
Oscilloscope
SDS2000X Plus Quick Start 1
Copyright Information
Declaration
SIGLENT products are protected by patent law in and outside of P.R.C.
SIGLENT reserves the right to modify or change parts of or all the specifications or
pricing policies at the company’s sole decision.
Information in this publication replaces all previously corresponding material.
Any method of copying, extracting or translating the contents of this manual is not
allowed without the permission of SIGLENT.
Note: SIGLENT is the registered trademark of SIGLENT TECHNOLOGIES CO., LTD.
2 SDS2000X Plus Quick Start
Contents
COPYRIGHT INFORMATION ................................................................................................................1
GENERAL SAFETY SUMMARY .............................................................................................................3
GENERAL CARE AND CLEANING.......................................................................................................5
GENERAL INSPECTION............................................................................................................................6
QUICK START ...............................................................................................................................................7
FRONT OF OSCILLOSCOPE....................................................................................................................9
BACK OF OSCILLOSCOPE .................................................................................................................... 10
PROBE COMPENSATION..................................................................................................................... 11
USER INTERFACE..................................................................................................................................... 12
BASIC OPERATIONS .............................................................................................................................. 19
SDS2000X Plus Quick Start 3
General Safety Summary
Carefully read the following safety precautions to avoid any personal injury or damage
to the instrument and any products connected to it. To avoid potential hazards, please
use the instrument as specified.
Use Proper Power Cord
Only the power cord designed for the instrument and authorized by local government
regulations should be used.
Ground the Instrument
The instrument is grounded through the protective earth conductor of the power cord.
To avoid electric shock, please make certain the instrument is grounded correctly
before connecting its input or output terminals.
Connect the Signal Cable Correctly
The potential of the signal cable ground is equal to the earth ground. Do not connect
the signal wire to a high voltage.
Look Over All Terminals’Ratings
To avoid fire or electric shock, please look over all ratings and sign instructions of the
instrument. Before connecting the instrument, please read the manual carefully to
gain more information about the ratings.
Use Proper Overvoltage Protection
Make sure that no overvoltage (such as that caused by a thunderstorm) can reach the
product, or else the operator might be exposed to the danger of electrical shock.
Electrostatic Prevention
Operate in an electrostatic-protected area environment to avoid damages induced by
static discharge. Always ground both the internal and external conductors of the cable
to release a static charge before connecting.
4 SDS2000X Plus Quick Start
Maintain Adequate Ventilation
Inadequate ventilation may cause an increase in temperature, which may eventually
damage the instrument. Maintain suitable ventilation and inspect the fan and intake
regularly.
Avoid Exposed Circuits and Components
Do not touch exposed contacts or components when the instrument's power is on.
Use Only the Specified Fuse
Do Not Operate Without Covers
Do not operate the instrument with covers or panels removed.
Safety Terms and Symbols
Terms used in this product. These terms may appear in the product:
DANGER
Indicates direct injury or hazards that may happen.
WARNING
Indicates potential injury or hazards that may happen.
CAUTION
Indicates potential damage to the instrument or other property that may happen.
Symbols used in this product. These symbols may appear on the product:
Hazardous
Voltage
Protective Earth
Ground
Warning
Earth Ground
Power Switch
SDS2000X Plus Quick Start 5
General Care and Cleaning
Care
Do not store or leave the instrument in direct sunshine for extended periods of time.
To avoid damages to the instrument or probes, please do not expose them to fog,
liquid, or solvents.
Cleaning
Please perform the following steps to clean the instrument and probes regularly in
accordance with its operating conditions.
1. Disconnect the instrument from all power sources and then clean with a soft wet
cloth.
2. Clean the loose dust on the outside of the instrument and probe with a soft cloth.
When cleaning the LCD, take care to avoid scratching it.
To avoid damage to the surface of the instrument and probe, please do not use any
corrosive liquid or chemical cleansers.
Make sure that the instrument is completely dry before restarting it to avoid potential
short circuits or personal injury.
6 SDS2000X Plus Quick Start
General Inspection
1. Inspect the shipping container
Keep the damaged shipping container or cushioning material until the contents of
the shipment have been completely checked and the instrument has passed both
electrical and mechanical tests.
The consigner or carrier will be responsible for damages to the instrument resulting
from shipment. SIGLENT would not provide free maintenance or replacement if the
instrument has been damaged in shipment.
2. Inspect the instrument
If there are instruments found damaged, defective or failure in electrical and
mechanical tests, please contact SIGLENT.
3. Check the accessories
Please check the accessories according to the packing list. If the accessories are
incomplete or damaged, please contact your SIGLENT sales representative.
SDS2000X Plus Quick Start 7
Quick Start
Front View
Top View
8 SDS2000X Plus Quick Start
Adjust the Supporting Legs
Adjust the supporting legs properly to use them as stands to tilt the oscilloscope
upwards for stable placement as well as easier operation and observation of the
instrument.
Connecting to Power Supply
The standard power supply for the instrument is 100~240 V, 50/60 Hz or 100~120 V,
400 Hz. Please use the power cord provided with the instrument to connect it to AC
power.
Autres manuels pour SDS2000X Plus Series
3
Table des matières
Autres manuels SIGLENT Équipement de test
SIGLENT
SIGLENT SHS800 series Manuel utilisateur
SIGLENT
SIGLENT SDS7000A Series Manuel utilisateur
SIGLENT
SIGLENT SDS1000X+ Series Manuel utilisateur
SIGLENT
SIGLENT SHS1000 Series Manuel utilisateur
SIGLENT
SIGLENT SDS1000X-E Series Manuel utilisateur
SIGLENT
SIGLENT SDS1004X-E Series Manuel utilisateur
SIGLENT
SIGLENT SDS2352X-E Manuel utilisateur
SIGLENT
SIGLENT SDS1000X-E Series Manuel utilisateur
SIGLENT
SIGLENT SME5000A Series Manuel utilisateur
SIGLENT
SIGLENT SDS2000X Plus Series Manuel utilisateur
SIGLENT
SIGLENT SDS1000X Series Manuel utilisateur
SIGLENT
SIGLENT SDL1000X Manuel utilisateur
SIGLENT
SIGLENT SDS2104X Manuel utilisateur
SIGLENT
SIGLENT SDS2000X Plus Series Manuel utilisateur
SIGLENT
SIGLENT SDS2000 Series Manuel utilisateur
SIGLENT
SIGLENT SHS800X Series Manuel utilisateur
SIGLENT
SIGLENT SDS1000D Manuel utilisateur
SIGLENT
SIGLENT SDS1000X-E Series Manuel utilisateur
SIGLENT
SIGLENT SDS1102X Manuel utilisateur
SIGLENT
SIGLENT SDS1022DL Manuel utilisateur
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
