SIGLENT SDS1102X Manuel utilisateur

User Manual

SDS1000 Series Digital oscilloscope

UM0101X-E01A

2015 SIGLENT TECHNOLOGIES CO., LTD.

www.biall.com.pl

SIGLENT

SDS1000X User Manual I

Trademark Information

SIGLENT is the registered trademark of SIGLENT TECHNOLOGIES CO., LTD.

Declaration

SIGLENT products are protected by patent law in and outside of P.R.C.

SIGLENT reserves the right to modify or change parts of or all the specifications or pricing

policies at company’s sole decision.

Information in this publication replaces all previously corresponding material.

Any way of copying, extracting or translating the contents of this manual is not allowed

without the permission of SIGLENT.

Product Certification

SIGLENT guarantees this product conforms to the national and industrial stands in China

and other international stands conformance certification is in progress.

If you have any problem or requirement when using our products, please contact

SIGLENT TECHNOLOGIES CO., LTD

Add：3//F, Bldg No.4, Antongda Industrial Zone, 3rd Liuxian Road, Bao’an District,

Shenzhen, 518101, P.R.China

Tel：400-878-0807

E-mail：sales@siglent.com

http://www.siglent.com

www.biall.com.pl

SIGLENT

II SDS1000X User Manual

Safety Information

General Safety Summary

Carefully read the following safety precautions to avoid any personal injury or

damage to the instrument and any products connected to it. To avoid potential

hazards, please use the instrument as specified.

Use Proper Power Line

Only the power cord designed for the instrument and authorized by local country could be

used.

Ground the Instrument

The instrument is grounded through the protective earth conductor of the power line. To

avoid electric shock, please make sure the instrument is grounded correctly before

connecting its input or output terminals.

Connect the Signal Wire Correctly

The potential of the signal wire is equal to the earth, so do not connect the signal wire to a

high voltage.

Look Over All Terminals‟ Ratings

To avoid fire or electric shock, please look over all ratings and sign instruction of the

instrument. Before connecting the instrument, please read the manual carefully to gain

more information about the ratings.

Use Proper Overvoltage Protection

Make sure that no overvoltage (such as that caused by a thunderstorm) can reach the

product, or else the operator might expose to danger of electrical shock.

Electrostatic Prevention

Operate in an electrostatic discharge protective area environment to avoid damages

induced by static discharge. Always ground both the internal and external conductors of

the cable to release static before connecting.

Keep Well Ventilation

Inadequate ventilation may cause increasing of temperature, which will eventually

damage the instrument. So keep well ventilation and inspect the intake and fan regularly.

Avoid Circuit or Components Exposed

Do not touch exposed contacts or components when the power is on.

www.biall.com.pl

SIGLENT

SDS1000X User Manual III

Use proper Fuse

Use only the specified fuse.

Do Not Operate Without Covers

Do not operate the instrument with covers or panels removed.

Do Not Operate With Suspected Failures.

If you suspect damage occurs to the instrument, have it inspected by qualified service

personnel before further operations. Any maintenance, adjustment or replacement

especially to circuits or accessories must be performed by SIGLENT authorized

personnel.

Do Not Operate in Wet Conditions.

In order to avoid short circuiting to the interior of the device or electric shock, please do

not operate in a humid environment.

Do Not Operate in an Explosive Atmosphere.

In order to avoid damages to the device or personal injuries, it is important to operate the

device away from an explosive atmosphere.

Keep Product Surfaces Clean and Dry.

To avoid the influence of dust and/or moisture in air, please keep the surface of device

clean and dry.

Handling Safety

Please handle with care during transportation to avoid damages to buttons, knob

interfaces and other parts on the panels.

www.biall.com.pl

SIGLENT

IV SDS1000X User Manual

Safety Terms and Symbols

Terms in this Manual. These terms may appear in this manual:

WARNING

Warning statements indicate the conditions or practices that could

result in injury or loss of life.

CAUTION

Caution statements indicate the conditions or practices that could

result in damage to this product or other property.

Terms on the product. These terms may appear on the product:

DANGER Indicates direct injuries or hazards that may happen.

WARNING Indicates potential injuries or hazards that may happen.

CAUTION Indicates potential damages to the instrument or other property that may

happen.

Symbols on the product. These symbols may appear on the product:

Hazardous protective Earth Warning Test Power Switch

Voltage Terminal Ground

www.biall.com.pl

SIGLENT

SDS1000X User Manual V

Measurement Category

Measurement Categories

SDS1000X series digital oscilloscopes can make measurements in measurement

category I.

WARNING

This oscilloscope can only be used for measurements within its specified

measurement categories.

Measurement Category Definitions

Measurement category I is for measurements performed on circuits not directly connected

to MAINS. Examples are measurements on circuits not derived from MAINS, and

specially protected (internal) MAINS derived circuits. In the latter case, transient stresses

are variable; for that reason, the transient withstand capability of the equipment is made

known to the user.

Measurement category II is for measurements performed on circuits directly connected to

the low voltage installation. Examples are measurements on household appliances,

portable tools and similar equipment.

Measurement category III is for measurements performed in the building installation.

Examples are measurements on distribution boards, circuit-breakers, wiring, including

cables, bus-bars, junction boxes, switches, socket-outlets in the fixed installation, and

equipment for industrial use and some other equipment, for example. Stationary motors

with permanent connection to the fixed installation.

Measurement category IV is for measurements performed at the source of the low-voltage

installation. Examples are electricity meters and measurements on primary over current

protection devices and ripple control units.

www.biall.com.pl

SIGLENT

VI SDS1000X User Manual

Working Environment

Temperature

Operating: 10℃to +40℃

Non-operation:-20℃to +70℃

Humidity

Under +35℃:≤90% relative humidity

+35℃to +40℃: ≤60% relative humidity

WARNING

To avoid short circuit inside the instrument or electric shock, please do not

operate in humid environment.

Altitude

Operating: less than 3 Km

Non-operation: less than 15 Km

Installation (overvoltage) Category

This product is powered by mains conforming to installation (overvoltage) category II.

WARNING

Make sure that no overvoltage (such as that caused by thunderbolt) can reach

the product, or else the operator might expose to danger of electric shock.

Installation (overvoltage) Category Definitions

Installation (overvoltage) category I refers to signal level which is applicable to equipment

measurement terminals connected to the source circuit. In these terminals, precautions

are done to limit the transient voltage to the corresponding low level.

Installation (overvoltage) category II refers to the local power distribution level which is

applicable to equipment connected to the AC line (AC power).

www.biall.com.pl

SIGLENT

SDS1000X User Manual VII

Ventilation Requirement

This oscilloscope uses fan to force cooling. Please make sure that the air intake and

exhaust areas are free from obstructions and have free air. When using the oscilloscope

in a bench-top or rack setting, provide at least 10 cm clearance beside, above and behind

the instrument for adequate ventilation.

WARNING

Inadequate ventilation may cause temperature increase which would damage

the instrument. So please keep the instrument well ventilated during operation

and inspect the intake and fan regularly.

www.biall.com.pl

SIGLENT

VIII SDS1000X User Manual

General Care and Cleaning

Care

Do not store or leave the instrument in direct sunshine for long periods of time.

WARNING

To avoid damages to the instrument or probe, please do not leave them in fog,

liquid, or solvent.

Cleaning

Please perform the following steps to clean the instrument and probe regularly according

to its operating conditions.

1. Disconnect the instrument from all power sources, and then clean it with a soft wet

cloth.

2. Clean the loose dust on the outside of the instrument and probe with a soft cloth.

When cleaning the LCD, take care to avoid scarifying it.

WARNING

To avoid damages to the surface of the instrument and probe, please do not

use any corrosive liquid or chemical cleanser.

WARNING

Make sure that the instrument is completely dry before restarting it to avoid

short circuits or personal injuries.

www.biall.com.pl

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SIGLENT Équipement de test

SIGLENT

SIGLENT SDL1000X Manuel utilisateur

SIGLENT

SIGLENT SDS1000CML+ Manuel utilisateur

SIGLENT

SIGLENT SDS1000CML series Manuel utilisateur

SIGLENT

SIGLENT SAP5000D Manuel utilisateur

SIGLENT

SIGLENT SDS2304X Manuel utilisateur

SIGLENT

SIGLENT SDS1000X-E Series Manuel utilisateur

SIGLENT

SIGLENT SDS1204X HD Manuel utilisateur

SIGLENT

SIGLENT SHS800X Series Manuel utilisateur

SIGLENT

SIGLENT SDL1000X Manuel utilisateur

SIGLENT

SIGLENT SDS6000L Series Manuel utilisateur

SIGLENT

SIGLENT SDS2104X Manuel utilisateur

SIGLENT

SIGLENT SDS5000X Series Manuel utilisateur

SIGLENT

SIGLENT SDS-2000X-LA Manuel utilisateur

SIGLENT

SIGLENT SDS800X HD Series Manuel utilisateur

SIGLENT

SIGLENT SDS2352X-E Manuel utilisateur

SIGLENT

SIGLENT SDS2000X Series Manuel utilisateur

SIGLENT

SIGLENT SDS1202X-U Series Manuel utilisateur

SIGLENT

SIGLENT SDS2000X Plus Series Manuel utilisateur

SIGLENT

SIGLENT SDS1022DL Manuel utilisateur

SIGLENT

SIGLENT SDS1000CFL Series Manuel utilisateur

SIGLENT

SIGLENT SME5000A Series Manuel utilisateur

SIGLENT

SIGLENT SHS1000 Series Manuel utilisateur

SIGLENT

SIGLENT SDS1072CML Manuel utilisateur

SIGLENT

SIGLENT SDS5000X Series Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur