Siemens CLIMATIX C400 Manuel utilisateur
1 | P u s l a p i s
SIEMENS CLIMATIX
Dry Cooler manual
C400 –POL468.65/STD
2 | P u s l a p i s
SIEMENS CLIMATIX
Table of contents
1Display.........................................................................................................................................................................3
1.1 POL871.72/STD ................................................................................................................................................3
1.1.1 Connecting to user profile ........................................................................................................................3
1.1.2 Connecting to service profile ...................................................................................................................4
1.1.3 Alarm list .....................................................................................................................................................5
1.2 Web service access..........................................................................................................................................5
2Control logic................................................................................................................................................................8
2.1 Turning on system.............................................................................................................................................8
2.2 Dry cooler control (Dry Cooler control)...........................................................................................................8
3Communications........................................................................................................................................................9
3 | P u s l a p i s
SIEMENS CLIMATIX
1 Display
1.1 POL871.72/STD
Pic 1. POL871.72/STD
1.1.1 Connecting to user profile
Connect to “User“ profile. Hold “Enter“ button for 3 seconds.
Pic. 2 Button placement
After 3 seconds screen changes to Pic. 3.
4 | P u s l a p i s
SIEMENS CLIMATIX
Pic. 3 Login screen
User password is 1000 and it can be entered by “Up” and “Down” buttons and confirm selection
press „Enter“. When correct password is entered in the right corner one key icon will be showed.
On User Level user can change “Setpoint” and turn on/off machine from display in line
“Display/Comm:
1.1.2 Connecting to service profile
Connect to “Service” profile. Hold “Enter” button for 3 seconds.
Pic. 4 Button placement
After 3 seconds screen changes to Pic. 5.
5 | P u s l a p i s
SIEMENS CLIMATIX
Pic. 5 Login screen
User password is 2000 and it can be entered by “Up” and “Down” buttons and confirm selection
press „Enter“. When correct password is entered in the right corner two key icon will be showed.
In service level parameters for regulation and alarms can be changed.
1.1.3 Alarm list
AL01
Fan overload
AL02
DryCoolerIn Temp. sensor fault
AL03
DryCoolerOut Temp. sensor fault
AL04
Fault Supply pump (Single pump)/ Fault Supply pump 1 (Twin
pump)
AL05
Fault Flow Detector (Single pump)
AL06
Fault Supply pump 2 (Twin pump)
AL07
Fault Flow Detector (Twin pump)
AL08
Outside temp. sensor fault
AL09
Fault Adiabatic pump
AL10
Fault flow switch adiabatic pump
Most recent alarm will be showed on HMILED. Alarm history can be reached by Hold “SET” key for
5s then screen will change and show “PL” press “UP” key and it changes to ALH and alarm history
is showed.
1.2 Web service access
For reaching internet access find IP:
POL871.72/STD Main menu->System->Communications
Enter found IP address to browser and should see Authentication required window:
6 | P u s l a p i s
SIEMENS CLIMATIX
Pic. 7 Authentication required
Enter user name and password:
User name: WEB
Password: SBTAdmin!
When entered correctly user should see:
Pic. 8 Web server pin
Enter user or service Pin for required access level.
7 | P u s l a p i s
SIEMENS CLIMATIX
Pic. 9 Web server
8 | P u s l a p i s
SIEMENS CLIMATIX
2 Control logic
2.1 Turning on system
System starts to work then Main switch On/Off and Display/Comm On/Off both is in ON state.
2.2 Dry cooler control (Dry Cooler control)
Fan speed is regulated by output temperature of glycol. If temperature is closer to setpoint fan power is
increased.
Example. Setpoint = 20 °C, Dif = 5 °C. glycol temp. 15 °C fan power 0%, glycol temp. 17.5 °fan power 50%,
glycol temp. 20 °C fan power 100%.
9 | P u s l a p i s
SIEMENS CLIMATIX
3 Communications
Possible communications:
Modbus RTU by default: Baud rate 19200 , Parity EVEN, Stop bits 1, Word length 8 bit.
Modbus TCP/IP port: 502.
Modbus list parameters:
Parameters
Address
Read/Write
Gain
Mode
Main switch Off/On
H2
Read
Display/Comm. Off/On
H4
Read
Setpoint
H8
Read/Write
Dif
H10
Read/Write
Fan
DryCooler temp.IN value
H100
Read
0.1
DryCooler temp.OUT value
H102
Read
0.1
DryCooler temp.OUT alarm
H104
Read
Fan overload
H106
Read
Fan output 0-100%
H108
Read
Fan work hours
H118
Read
Pump
Supply pump (Single) Status
H200
Read
Supply pump 1 (Twin) Status
H202
Read
Supply pump 2 (Twin) Status
H204
Read
Supply pump (Single) / Supply pump 1 (Twin) overload
H206
Read
Supply pump 2 (Twin) overload
H208
Read
Flow det. status (single pump)
H210
Read
Flow det. alarm (single pump)
H212
Read
Supply pump (Single) Work hours
H214
Read
Supply pump 1 (Twin) Work hours
H216
Read
Supply pump 2 (Twin) Work hours
H218
Read
Adiabatic pump Status
H220
Read
Adiabatic pump work hours
H222
Read
Adiabatic pump overload
H224
Read
Flow det. status adiabatic pump
H226
Read
Flow det. alarm adiabatic pump
H228
Read
Valve
Valve output 0-100
H300
Read
Valve drain status
H302
Read
Valve supply status
H304
Read
Common
Alarm output
H400
Read
Outside temp.
H402
Read
0.1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Siemens Contrôleurs
Siemens
Siemens GIB 1 Series Manuel utilisateur
Siemens
Siemens CP-8000 Manuel utilisateur
Siemens
Siemens DELTA i-system Manuel utilisateur
Siemens
Siemens SSC Series Manuel utilisateur
Siemens
Siemens Simantic S7-1500 Manuel utilisateur
Siemens
Siemens DXR2.E10PL-102B Manuel utilisateur
Siemens
Siemens sinamics dcp Manuel utilisateur
Siemens
Siemens Albatros2 RVA78.690 Manuel utilisateur
Siemens
Siemens SINUMERIK 840D sl Manuel de la liste des pièces
Siemens
Siemens SIMATIC ET 200SP Manuel utilisateur
Siemens
Siemens OpenAir GMA 1 Series Manuel utilisateur
Siemens
Siemens SIMATIC FM 357-2 Manuel utilisateur
Siemens
Siemens 8MR2170 Manuel utilisateur
Siemens
Siemens ACVATIX SKB Series Manuel utilisateur
Siemens
Siemens LMV51 Series Manuel de l'opérateur
Siemens
Siemens 340 Manuel utilisateur
Siemens
Siemens RMZ791 Manuel utilisateur
Siemens
Siemens Simatic S7-400 Manuel utilisateur
Siemens
Siemens SINUMERIK 840D sl Guide de l'utilisateur
Siemens
Siemens siprotec 7SA6 Manuel utilisateur
