Siemens PS-35 Manuel utilisateur

Installation Instructions

Model PS-35

Power Supply Module

ModelTC-30U

Transfer Module

P/N 315-085062-9

Siemens Industry, Inc.

Building Technologies Division

Florham Park, NJ

Siemens Building Technologies, Ltd.

Fire Safety & Security Products

2 Kenview Boulevard

Brampton, Ontario

L6T 5E4 Canada

Operation

The Model PS-35 stepdown transformer and bridge from

Siemens Industry, Inc. provides a rectified, full wave 24

VDC output from an input supply of 120 VAC, 50/60 Hz.

The input power consists of a main phase, with an inde-

pendent circuitbreaker labeled Reset, and a trouble

phase, which is separately fused. Both inputs use a com-

mon neutral.

The 24 volt full wave output is rated at 9 amperes DC, full

load, and 6 amperes DC, standby load. Separate output

fuses are provided for both the main and

auxiliary power outputs, fused at 15 amps and 2 amps,

respectively.

Terminals 5 and 6 provide 1.5A auxiliary output when the

PS-35 is used as a CP-35 system supply. For example,

output is rated 24 VDC, 1.5A max for internal applications

such as SR-32, SR-33, or Model RA annunciator located

within control unit enclosure(s).

When used as a separate 24 VDC power supply with bat-

tery backup and jumper plug JP-PS, terminals 5 and 6

may provide the full 9A loading. Typical wiring when used

with the TC-30U is shown in the illustration on the back of

this sheet.

Surge protection is provided across both the input

phases as well as the DC output.

Installation

When Used as Power Supply for Control Panel CP-35:

1. Mount the module to the horizontal mounting

brackets in upper right-hand position, on the top row

of the control enclosure.

2. Install wiring as necessary. Use special plug and

harness assembly for connection to CP-35

Control Panel. Refer to CP-35 Wiring Diagram (315-

084902) in the Control Panel INSTALLATION AND

MAINTENANCE INSTRUCTIONS for system inter-

connections.

3. Install protection cover plate over the terminals

after making wiring connections.

When Used as 24 VDC Power Supply with Battery Backup:

(See TYPICAL WIRING DIAGRAM illustration on reverse.)

1. Mount the module to the horizontal mounting

brackets in the control enclosure. Select a

convenient location so that wiring runs are as short

as possible. Note that the PS-35 occupies three

module positions.

2. Connect wiring as necessary.

Note: When an additional PS-35 Power Supply with

jumper plug JP-PS is used for extra bell ringing

capability in a CP-35 controlled system with

emergency power, a transfer module Model

TC-30U is required to supply emergency power

to the audible signal circuit. When battery

backup is not provided, the PS-35 output should

be supervised (SR-30 or equal).

3. Install protection cover plate over the terminals

after making wiring connections.

Fuse Replacement

Remove all system power before replacing fuses, first

battery and then AC. To power up, connect AC first then

battery.

PS-35:

For fuses F2 and F3, slide fuse off fuse holders, then

snap in new fuses.

F2: P/N 105-224090, 15A @ 250V max

F3: P/N 105-284845, 2A @ 125V max

TC-30U:

Push in and turn counterclockwise. Remove fuse from cap.

Replace with P/N 105-224090, 15A @ 250V max.

P/N 315-085062-9

PS-35

TB1

123456

Ground Wire

Connection

Input

Neutral

No Connection

18-31VDC, Full Wave

Unfiltered Rectified

PS-35 9A Max

Special Application

123456

Battery Input

24 VDC, 9A Max

(See Note)

To Designated Load

BATTERY

TROUBLE

TC-30U

15A

JP-PS

120VAC

50/60Hz

PS-35 3.2A

18-31VDC, Full Wave

Unfiltered Rectified or

Battery Backup

PS-35 9A Max

Special Application

Note: Battery charging connections not shown.

TYPICAL WIRING DIAGRAM

When Used As Separate 24 VDC

Power Supply With Battery Backup

When Used As Power Supply

For Control Panel of CP-35

See CP-35 Wiring

Diagram, P/N 315-084902

Notes:

1. Refer to the BI-35 Installation Instructions, P/N 315-086257, for detailed wiring

information when using the PS-35 in conjunction with the BI-35 module.

2. Refer to P/N 315-093680 for all power limited connections.

3. Refer to P/N 315-050769 for all battery information and battery charger information.

4. For the PS-35, TB1 positions 1, 2, 4-6 are non-power limited terminals. If power limited

wiring is desired for terminals 5 and 6, use the PLM-35, P/N 315-093495. For the TC-30U,

all terminals are non-power limited. For power limited wiring on terminals 5 and 6, use

the PLM-35, P/N 315-093495.

Ce manuel convient aux modèles suivants

Autres manuels Siemens Unité de contrôle

Siemens

Siemens AS-Interface 3RK2402-2 00 Series Manuel utilisateur

Siemens

Siemens SINUMERIK Series Manuel de la liste des pièces

Siemens

Siemens ALD-2I Manuel utilisateur

Siemens

Siemens SINAMICS S120 Document technique

Siemens

Siemens XDLC Manuel utilisateur

Siemens

Siemens SINUMERIK 804D sl Guide de démarrage rapide

Siemens

Siemens SINUMERIK 840D sl Guide de démarrage rapide

Siemens

Siemens SIMATIC ET 200SP IM 155-6 PN/2 HF Manuel utilisateur

Siemens

Siemens Simatic S7-1500 Manuel utilisateur

Siemens

Siemens SIMOTICS CONNECT 400 Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens Siwarex U Guide d'application

Siemens

Siemens SIMATIC NET CP 343-2 Manuel utilisateur

Siemens

Siemens SIMATIC ET 200SP Manuel utilisateur

Siemens

Siemens TX-I/O TXM1.8D Manuel de la liste des pièces

Siemens

Siemens RUGGEDCOM RS900F Manuel utilisateur

Siemens

Siemens LFL Series Manuel du propriétaire

Siemens

Siemens SIMATIC TI505 Manuel utilisateur

Siemens

Siemens SINAMICS G120 Manuel utilisateur

Siemens

Siemens EFB300 Manuel utilisateur

Siemens

Siemens SINUMERIK 808D Guide de démarrage rapide

Siemens

Siemens 3RK2 Series Manuel utilisateur

Siemens

Siemens SINUMERIK 828D Turning Manuel du propriétaire

Siemens

Siemens SINUMERIK 828D Turning Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur