Sharp DN3E6JE074 Manuel utilisateur

Rev. 6.0

SHARP

IoT Gateway User’s Guide

Model: DN3E6JE074

Introduction

This document describes the IoT Gateway (Model DN3E6JE074) overview and how to use the Z-Wave functionality.

Feature Overview

The IoT Gateway is a Gateway for IoT with functions of LTE, Wireless LAN, Z-Wave and BLE communication. It can collect

sensing data from various Z-Wave and BLE sensor devices, and upload it to cloud server by LTE function anywhere LTE

communication is available.

The IoT Gateway has the following general features:

-LTE communication (SIM Free)

-Wireless LAN Access Point

-1 LAN Port

-Z-Wave communication

-BLE communication

Product Drawings

Front side

Back side

Installation

The installation of the IoT Gateway is only one step process:

1- Connect AC Adapter to the Gateway and plug it into AC outlet. The Gateway has no Power Switch. It will power up as soon

as plugged in the AC Adapter.

If you don’t use LTE network connection, the Gateway needs to be connected to internet via LAN port.

LED Normal Operation

-LTE LED turns ON when LTE connection established.

-WLAN LED turns ON when Access Point function is enabled, and blinks when received a packet.

-Z-Wave LED turns ON when Z-Wave function is ready, and blinks when received a packet.

-BLE LED turns ON when BLE function is ready, and blinks when received a packet.

-LAN LED blinks when received a packet via LAN port.

-Power LED always ON when powered.

Z-Wave Overview

General Information

Device Type

Gateway

Role Type

Central Static Controller (CSC)

Command Class

Support

COMMAND_CLASS_APPLICATION_STATUS

COMMAND_CLASS_ASSOCIATION_V2

COMMAND_CLASS_ASSOCIATION_GRP_INFO

COMMAND_CLASS_CRC_16_ENCAP

COMMAND_CLASS_DEVICE_RESET_LOCALLY

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

COMMAND_CLASS_POWERLEVEL

COMMAND_CLASS_SECURITY

COMMAND_CLASS_VERSION_V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Control

COMMAND_CLASS_ASSOCIATION_V2

COMMAND_CLASS_BASIC

COMMAND_CLASS_CRC_16_ENCAP

COMMAND_CLASS_MULTI_CHANNEL _V4

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

COMMAND_CLASS_WAKE_UP_V2

COMMAND_CLASS_BATTERY

COMMAND_CLASS_CONFIGURATION

COMMAND_CLASS_DOOR_LOCK_V2

COMMAND_CLASS_INDICATOR

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

COMMAND_CLASS_METER_V3

COMMAND_CLASS_NODE_NAMING

COMMAND_CLASS_NOTIFICATION_V8

COMMAND_CLASS_SENSOR_MULTILEVEL_V11

Interoperability

Any products from different manufacturers and product categories can be a part of the same Z-Wave network with the IoT

Gateway, and that the different non-battery powered nodes can act as repeaters regardless of manufacturers.

Security Enabled Z-Wave Plus Product

The IoT Gateway is a Security Enabled Z-Wave Plus Product.

Basic Command Class Handling

The IoT Gateway will ignore Basic Commands received from other devices on the Z-Wave network.

Support for Association Command Class

Group id: 1 –Lifeline

Maximum number of devices that can be added to the group: 5

All devices are associated with the group.

Android Controller Application “SH-Gateway-Controller”

Gateway select screen

The icon of the gateway that you can use is displayed.

If nothing is displayed, please confirm that the network is correctly set.

Device Viewer

When you select a gateway, the available devices are displayed.

If there is no available device, nothing is displayed.

When an unsupported device is detected, no icon is displayed in this

area.

The report value of the latest Basic command is displayed.

* For only unsupported devices

In the case of a device that supports lock / unlock, the lock status is

displayed.

In the case of a device that supports temperature, humidity or

illuminance, the report value is displayed.

Represents the state of Home security.

Represents the current Event according to Notification from the device.

Manufacture: The Manufacture ID is displayed.

Product ID: The Product ID is displayed.

Node ID: The Node ID is displayed.

WakeupInterval: The value of Wakeup Interval is displayed.

In the case of a device that has End points, all End points are displayed.

Endpoint number is displayed.

The remaining battery power is displayed.

The value of indicator is displayed.

The values of various meters are displayed.

From the left, power meter, gas meter, water meter order.

By tapping the report icon, a dialog of Association, Association Group

Info, Configuration command is displayed.

Node Name

Node Location

means humidity

means temperature

means illuminance

Motion Detection

Undetected

Detected

Glass Breakage

Intrusion

Tampering

Unknown

means one device

lock

unlock

Multilevel sensor

Device button

Lock status

Home security

Undetected

Detected

Undetected

Detected

Undetected

Detected

Undetected

Detected

Device End point button

means End point

Battery

Battery level is displayed

100%

Battery level is displayed

as numerical value.

It is displayed when the battery

level is not acquired.

It is displayed when the battery

level is low.

Indicator

The numerical value is displayed

on the right of the icon.

The value of the power meter is

displayed on the right of the icon.

The value of the gas meter is

displayed on the right of the icon.

The value of the water meter is

displayed on the right of the icon.

Meter

When the report has been updated,

It is displayed with a red icon.

Report button

Inclusion and Exclusion (Add and Remove)

Inclusion (Adding devices)

To add a device to the Z-Wave network, press “Inclusion” button in

Android Controller Application or press the Z-Wave button of the

IoT Gateway once. This will put the IoT Gateway into Inclusion

mode and Z-Wave LED blinks slowly. Gateway operation dialog

appears in Android Controller Application. Gateway operation dialog

keeps being displayed during Inclusion mode.

If you want to stop Inclusion, press “Abort” button in Gateway

operation dialog, or wait for one minute and Inclusion mode will

automatically stop. When Inclusion mode is stopped, Gateway

operation dialog will automatically disappear.

Exclusion (Removing devices)

To remove a device from the Z-Wave network, press “Exclusion”

button in Android Controller Application or hold down the Z-Wave

button of the IoT Gateway (over 3 seconds). This will put the IoT

Gateway into Exclusion mode and Z-Wave LED blinks quickly. Gateway

operation dialog appears in Android Controller Application. Gateway

operation dialog keeps being displayed during Exclusion mode.

If you want to abort Exclusion, press “Abort” button in Gateway

operation dialog, or wait for one minute and Exclusion mode will

automatically stop. When Exclusion mode is stopped, Gateway

operation dialog will automatically disappear.

Table des matières

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur