Shaklee Get Clean Water Pitcher Guide de référence rapide
USE & CARE INSTRUCTIONS
Water Pitcher
10-CUP
CAPACITY
Proprietary Automatic
Filter Life Meter
Safe for you, your home,
and your planet.®
Pour consulter les instructions en français,
veuillez vous reporter à la page 22.
Para instrucciones en español,
por favor reérase a la página 11.
Independently tested and certified to improve
taste and water quality.
This system has been tested and certified by
WQA to NSF/ANSI 42 & 53 for the reduction of
aesthetic chlorine, taste and odor, particulate
class III, cadmium, lead, mercury, and VOC.
1
V2.1
GET CLEAN® WATER PITCHER
COMPONENTS AND FEATURES
1 Get Clean® Water Pitcher
1 Reservoir
1 Lid with built-in filter life meter
1 Water Refillable Filter
Housing Kit with cap and base
(not included with pitcher)
1 Water Filter Refill
(not included with pitcher)
TOOLS AND MATERIALS REQUIRED FOR INSTALLATION:
• Cold running water
• One tall water glass or pan large enough to soak the carbon-block filter
• Mild soap for washing the pitcher
Lid with built-in
filter life meter
Reservoir
Water Pitcher
Water Filter
Refill
Water Refillable
Filter Housing Kit
2
V2.1
Keeping your Get Clean® Water Pitcher clean
and ready to pour starts with clean hands and
a clean work surface.
Place Get Clean Water Filter Refill in clean
glass or pan of water.
Soak filter for at least one
hour (ensure filter is
fully submerged).
Wash all other parts with
soap and warm water.
Rinse thoroughly. Not for
use in dishwasher.
CLEAN START
Flush the filter under
water tap and rinse
thoroughly. There could
be some fine carbon
particles in the washings.
Continue washing until
water is clear and free of
carbon particles.
3
V2.1
WATER REFILLABLE FILTER
HOUSING KIT ASSEMBLY
Insert Water Filter Refill in filter
housing cap. Use either end of
filter. Be sure filter port on the
end of the filter fits into the air
vent opening port centered in
the top of the filter housing cap.
Place filter housing base over
the other end of carbon-block
filter. The filter port on the end
of the filter should fully seat with
the drain port in the bottom of
the filter housing base.
Twist base clockwise to
lock and seal.
Gasket seats securely
in cove.
NOTICE:
Always make sure
gasket is properly
positioned with
flange fully
seated under rim
of housing base.
4
V2.1
FINAL ASSEMBLY
Place reservoir into the
Water Pitcher.
Place assembled Water
Refillable Filter Housing
Kit into the reservoir,
aligning slot with
reservoir rib. Housing
Kit must be securely
seated to ensure a
tight seal.
Pull upward to fully
extend the air vent tube
until top of tube is above
fill-line indicator in
the reservoir.
5
V2.1
AUTOMATIC FILTER
LIFE METER
Turn filter life meter counterclockwise until set.
The filter life meter advances with open and
close action of the flip-to-fill lid. This action
assumes that the user will fill the reservoir to
the fill line and let all the water in the reservoir
filter down to the pitcher. Please see instructions on the
next page on how to ensure accuracy of the filter life meter.
"Set" should appear in the filter life meter
window when the meter is set.
S
E
T
6
V2.1
FILL FOR
FILTERED WATER
To ensure accuracy of the filter life meter
readings, always be sure to do the following:
1.
2.
3.
4.
*For a filter with a 40-gallon capacity, replace filter at
40-gallon mark and reset the filter life meter.
5.
Fully open and close the flip-to-fill lid with each fill of the
reservoir. This action advances the meter in your filter life
meter.
Always fill the reservoir through the flip-to-fill lid.
Always fill the reservoir to the fill line with each reservoir
fill and let it drain completely before refilling.
Make sure the water in the reservoir does not rise to cover
the vent holes in the air vent tube.
Replace the filter with a
Water Filter Refill once
it reaches the stated
filter capacity. The filter
should be replaced and
the meter reset when
the '80' is centered in
the meter window.*
Reset meter per steps
on Page 5.
6.
7
V2.1
KEEPING YOUR
PITCHER PERFECT
Wipe the exterior of the pitcher with warm
water and soap, and rinse whenever there is
a buildup of residue from daily handling.
Monitor the reading on the filter life meter to
anticipate the need to replace the Water
Filter Refill.
Replace the filter once it has reached stated
capacity or every four months, whichever
comes first. Reset the filter life meter with
each Water
Filter Refill of
the Filter
Housing Kit. 10 11 12 13 14
15 16 17 18 19 20 21
22 23
29 30
24 25 26 27 28
1234 5 67
89
8
V2.1
INSTRUCTIONS FOR USE
To use your Get Clean® Water Pitcher, open
the flip-to-fill lid in the top of your pitcher. Fill
the reservoir with cold water to the fill line. The
water will filter by gravity and fill the pitcher
with filtered water.
If you prefer to have your water chilled, place
the entire pitcher in the refrigerator.
At the end of four months or 80 gallons,
whichever comes first, replace the water filter
using the instructions in this manual.
1.
2.
3.
Operation/Maintenance Data
These units are intended for noncommercial use. They should be
used only in ambient air temperature of between 35°F (2°C) and
85°F (29°C). Placement of these units in direct sunlight or use
of electrical heating equipment on these units must be avoided.
Replace filter cartridge when and as directed in the installation/
operation instructions included with each cartridge. Replacement
filter cartridges are available through your Shaklee Independent
Distributor or by calling 1.800.SHAKLEE (1.800.742.5533).
9
V2.1
IMPORTANT REMINDERS
• These lters are not water puriers. Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after use of the system.
• This unit is not designed to lter sulfur (rotten-egg odor). Use of carbon lters to treat sulfur may intensify
taste/odor problems.
• Please comply with all state and local regulations regarding the installation of water treatment devices.
• The contaminants or other substances reduced by the water lter device are not necessarily in your water.
CAUTION
For testing information and performance claims, see Performance Data Sheet.
Replacement Filters
Shaklee® Get Clean® Water Pitcher
Usage and quality of water in your incoming water line affect the life of filter cartridges and determine when the
filter should be changed. Filters should be replaced sooner if the water-flow rate begins to slow noticeably or if
the filter fails to perform satisfactorily.
All Shaklee® Get Clean® Water Pitchers and Get Clean Water Filter Refills are interchangeable. All Get Clean Water
Filter Refills are designed to filter water in any Get Clean or BestWater® system. A filter's stated reduction capacity
is tied to the filter's performance within a specific filtration system for which it has been tested and certified. Please
see the Performance Data Sheet for the certified performance of specific systems with stated filters.
Original System Certification Required Filter Kit or Refills
Get Clean® Water Pitcher
(#52114 USA; N°42114 Canada)
Get Clean® Water Refillable Filter Housing Kit
(#52117 USA; N°42117 Canada)
Get Clean® Water Refillable Filter Housing Kit
(#52117 USA; N°42117 Canada)
Get Clean® Water Filter Refill 1-Pack
(#52115 USA; N°42115 Canada)
Get Clean® Water Filter Refill 3-Pack
(#52116 USA; N°42116 Canada)
Table des matières
Langues :
