Avanti WD31EC Manuel utilisateur

INSTRUCTION MANUAL

MANUAL DE INSTRUCCIONES

MODEL NUMBER / NUMERO DE MODELO:

WD31EC

THERMOELECTRIC WATER DISPENSER

ENFRIADOR DE AGUA TERMOELECTRICO

BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS.

Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications

without notice.

La sección en español empieza en la página 12.

Avanti Products, A Division of the Mackle Co., Ltd.

P.O. Box 520604 - Miami, Florida 33152

www.avantiproducts.com

TABLE OF CONTENTS

HELP US HELP YOU… 3

PARTS AND FEATURES 4

IMPORTANT SAFETY INSTRUCTIONS 5

INSTALLATION GUIDELINES 5

OPERATION INSTRUCTIONS 5

BEFORE USING YOUR WATER DISPENSER 5

OPERATING YOUR WATER DISPENSER 6

ELECTRICAL CONNECTION 6

REPLACING WATER BOTTLE 6

CONTROL AND DISPLAY PANEL 7

WORKING MODES 7

ENERGY SAVING MODE 7

NORMAL MODE 7

CARE AND MAINTENANCE 8

TAKING DISPENSER OUT OF SERVICE 8

PROBLEMS WITH YOUR WATER DISPENSER? 9

TROUBLESHOOTING GUIDE 9

SERVICE FOR YOUR WATER DISPENSER 9

YOUR AVANTI PRODUCTS WARRANTY 10

WIRING DIAGRAM 11

INSTRUCCIONES EN ESPAÑOL 12~15

REGISTRATION INFORMATION / REGISTRATION CARD 17

HELP US HELP YOU …

Read this guide carefully.

It is intended to help you operate and maintain

your new water dispenser properly.

Keep it handy to answer your questions.

If you don't understand something or you need

more assistance, please call:

Avanti Customer Service

800-220-5570

Keep proof of original purchase date (such as

your sales slip) with this guide to establish the

warranty period.

Write down the model and serial numbers.

You'll find them on a label located on the back

side of the unit.

Please write these numbers here:

____________________________________

Date of Purchase

____________________________________

Model Number

____________________________________

Serial Number

Use these numbers in any correspondence or

service calls concerning your water dispenser.

If you received a damaged water dispenser,

immediately contact the dealer (or builder) that

sold you the water dispenser.

Save time and money. Before you call for

service, check the Troubleshooting Guide. It

lists causes of minor operating problems that

you can correct yourself.

IF YOU NEED SERVICE

We're proud of our service and want you to be

pleased. If for some reason you are not happy

with the service you receive, here are some

steps to follow for further assistance.

FIRST, contact the people who serviced your

appliance. Explain why you are not pleased. In

most cases, this will solve the problem.

NEXT, if you are still not pleased, write all the

details, including your telephone number, and

send it to:

Customer Service

Avanti Products

10880 NW 30 Street

Miami, FL 33172 USA

PARTS AND FEATURES

1 Water Intake 11 Water Outlet

2 Energy Saving Mode Indicator 12 Storage Cabinet

3 Normal Mode Indicator 13 Removable Drip Tray

4 Hot Water Indicator 14 Leveling Legs

5 Warm Water Indicator 15 Cold Switch

6 Cold Water Indicator 16 Hot Switch

7 Hot Water Button 17 Cooling Fan Vent

8 Program Selector Button 18 Drain Hole (Cold Water)

9 Cold Water Faucet (Blue) 19 Drain Hole (Hot Water)

10 Hot Water Faucet / Child Guard (Red) 20 Power Supply Cord

IMPORTANT SAFETY INSTRUCTIONS

aWARNINGa

To reduce the risk of fire, electrical shock,

or injury when using your appliance, follow

these basic precautions:

•Read all instructions before using the water dispenser.

•Never clean parts with flammable fluids. The fumes can create a fire hazard or

explosion.

•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity

of this or any other water dispenser. The fumes can create a fire hazard or

explosion

•Do not plug unit into receptacle until you ensure the water tank switches are off.

-Save these instructions-

INSTALLATION GUIDELINES

•Remove the exterior and interior packing.

•Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.).

Direct sunlight may affect the acrylic coating and heat sources may increase electrical

consumption. Extreme cold ambient temperatures may also cause the appliance not to perform

properly.

•Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not under any

circumstances cut or remove the third (ground) prong from the power cord. Any questions

concerning power and/or grounding should be directed toward a certified electrician or an

authorized Avanti Products service center.

•This water dispenser is not recommended for outdoor use.

•Do not locate the dispenser in area where the temperature may fall below freezing (32º F).

•Keep area around dispenser free of dust and dirt.

•Keep the reserve supply of water bottles away from excessive heat and light.

OPERATION INSTRUCTIONS

Before Using Your Water Dispenser

•Check to be sure the following parts are included:

1 Instruction Manual

1 Removable Drip Tray

•The water cooler is pre-cleaned at the factory but the reservoir and water lines must be flushed

with fresh water before use as follows:

oKeep the unit unplugged.

oFill water tank with tap water full to capacity (about 20 ounces). Wait for 5 minutes until

water settles.

oProceed to drain the water from both faucets until no more water remains.

oThen, drain any water left in the tanks by opening the water drain caps located on the

bottom, until it drains completely.

oProceed to close the drain caps. Also make sure both faucets are closed.

oPlace the water bottle on the water intake; allow water to stand for approximately one

minute.

oOpen water faucets to insure water flows from both faucets.

oPlug dispenser into the electrical outlet.

IT WILL TAKE APPROXIMATELY 1HOUR TO REACH OPTIMUM TEMPERATURE.IF YOU CONSUME ONE 8OZ.

CUP,THE RECOVERY TIME IS APPROXIMATELY 25 MINUTES OR LESS.IF YOU CONSUME 2OR MORE 8

OZ.CUPS,RECOVERY TIME CAN TAKE UP TO 1HOUR.

oTurn the cold and hot water switches ON (at the rear).

oNow you are ready to use your water dispenser.

NOTE: Your water dispenser has been cleaned and sanitized before leaving the factory, but in

case a taste problem develops, place one tablespoon of baking soda and add tap water. Fill water

tank again and repeat basic operations previously outlined.

OPERATING YOUR WATER DISPENSER

Electrical Connection

This appliance should be properly grounded for your safety. The power cord of this appliance is

equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the

possibility of electrical shock.

Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not under any

circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning

power and/or grounding should be directed toward a certified electrician or an authorized Avanti

Products service center.

This appliance requires a standard 115/120 Volts A.C. ~/ 60Hz electrical outlet with three-prong

ground.

The cord should be secured behind the appliance and not left exposed or dangling to prevent

accidental injury.

Do not use an adapter plug with this appliance.

Do not use an extension cord with this appliance. If the power cord is too short, have a qualified

electrician or service technician install an outlet near the appliance.

Steps To Replace Water Bottle

zUse a clean cloth to wipe off neck of bottle.

zRemove cap (if one is present).

zCarefully lift bottle, do not place hands on the opening of the bottle while placing on the water

intake opening.

zInsert the water bottle into the water intake over the reservoir opening so that it settles properly.

zWipe off any water which may have splashed on dispenser top.

aWARNINGa

IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF

THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS

SERVICE CENTER.

Control and Display Panel

For operation of unit, please fill water and make sure water settles inside the water tank, and

then switch on both hot and cold switches at back of unit.

Working Programs:

Energy Saving Program:

When the PROGRAM button is pushed down, it’s under Energy Saving Program; The

(green) E-S indicator will be displayed. During operation the (red) “WARM” cycle indicator

will be displayed until the temperature of the water in the reservoir reaches 60ºC/140ºF.

Once the temperature reaches 60ºC/140ºF (approximately 4 minutes) the (red) “WARM”

indicator will turn off and will remain off until the temperature of the water in the reservoir

drops to 50ºC/122ºF at which time the (red) “WARM” cycle indicator will turn on and the

cycle will start again.

During “Energy Saver” Program, when you press the “HOT WATER” button, the (red)

“HOT” cycle indicator will be on and water temperature in the reservoir will be heated to

90ºC/194ºF (approximately 4 minutes). Once the water temperature reaches 90ºC/194ºF the

(red) “HOT” cycle indicator will turn off and will remain off until the “HOT WATER”

button in pressed again.

Normal Program:

When the PROGRAM button is released, it’s under Normal operation mode and the (orange)

NORM indicator light will displayed. During operation the (red) “HOT” cycle indicator will

be on until the temperature of the water in the reservoir reaches 90ºC/194ºF (approximately 9

minutes). The (red) “HOT” cycle indicator will turn off and will remain off until the

temperature of the water in the reservoir drops to 81ºC/178ºF at which time the (red) “HOT”

cycle indicator will turn on and the cycle will start again.

When the unit is in “NORMAL PROGRAM” the “HOT WATER” button is non-functional.

Cold Temp (Energy Saver / Normal Modes):

The cold water cycle is not affected by either program and continuously runs to maintain a

cold water temperature between 7ºC/44ºF and 10ºC/50ºF. Once the “Cold Switch” at the rear

of the unit is turned ON the (blue) “COLD” cycle indicator will be on until the temperature of

the water in the reservoir drops to 7℃/44ºF or less, the (blue) “COLD” cycle indicator will

turn off and the cooling cycle will stop until the temperature reaches 10℃/50ºF, at which

time the (blue) “COLD” cycle indicator will turn on again and the cooling cycle will start

again.

To get hot water:

♦Slide red safety button to the right and hold while pressing downward on hot water faucet to

dispense hot water.

♦Safety button will return to its original position when faucet is released.

CARE AND MAINTENANCE

•Wash the inside of the reservoir with a warm water and baking soda solution. The solution should

be about 2 tablespoons of baking soda to a quart of water.

•The drip tray and water faucets should be cleaned with mild detergent and warm water.

TAKING DISPENSER OUT OF SERVICE

•If the water dispenser will not be used for a long period of time, turn both switches OFF (at the

rear) and unplug the power cord from the wall outlet.

•Drain the water through the faucets.

•Drain the water from the tanks by removing the caps from the bottom of the dispenser.

NOTE:

THE HOT WATER FAUCET HAS A CHILD-SAFETY GUARD ATTACHMENT.

WARNING—THE WATER COMING OUT OF THE BOTTOM MARKED “HOT WATER DRAIN” MAY BE

SCOLDING.

PROBLEMS WITH YOUR WATER DISPENSER?

You can solve many common water dispenser problems easily, saving you the cost of a possible

service call. Try the suggestions outlined below to see if you can solve the problem before calling the

servicer.

TROUBLESHOOTING GUIDE

PROBLEMS POSSIBLE CAUSES

Water dispenser does not operate. Not plugged in.

The circuit breaker tripped or a blown fuse.

Water is not cold enough. Check to be sure the COLD switch on the back is

ON.

Too much water has been drawn within a short

period of time. If more than two 8 oz. Cups have

been drawn within a 25 minute span, you will

need to wait up to one hour to reach optimal

temperature.

Water is not hot enough. Check to be sure the HOT switch on the back is

ON.

Too much water has been drawn within a short

period of time. If more than two 8 oz. Cups have

been drawn within a 25 minute span, you will

need to wait up to one hour to reach optimal

temperature.

Vibrations. Check to assure that the water dispenser is level.

SERVICE FOR YOUR WATER DISPENSER

We are proud of our customer service organization and the network of professional service

technicians that provide service on your Avanti appliances. With the purchase of your Avanti

appliance, you can be confident that if you ever need additional information or assistance, the Avanti

Products Customer Service team will be here for you. Just call us toll-free.

AVANTI PRODUCTS CUSTOMER SERVICES

Product Information

800-323-5029 Whatever your questions are about our products,

help is available.

Part Orders

800-220-5570 You may order parts and accessories that will be

delivered directly to your home by personal

check, money order, Master Card, or Visa.

In-Home Repair Service

800-220-5570 An Avanti Products authorized service center will

provide expert repair service, scheduled at a time

that is convenient for you. Our trained servicers

know your appliance inside and out.

YOUR Avanti Products WARRANTY Staple your sales receipt here. Proof of

original purchase date is needed to obtain

service under warrant

WHAT IS COVERED

LIMITED ONE-YEAR

WARRANTY

For one year from the date of

purchase by the original owner, Avanti

Products will, at its option, repair or

replace any part of the appliance

which proves to be defective in

material or workmanship under normal

use. During this period Avanti

Products will provide all parts and

labor necessary to correct such

defects free of charge, so long as the

appliance has been installed and

operated in accordance with the

written instructions in this manual. In

rental or commercial use, the warranty

period is 90 days.

•Incidental or consequential damages.

•Parts and labor costs for the following will

not be considered as warranty:

•Light bulbs and/or plastic housing.

•Replacement of house fuses or resetting

circuit breakers.

•Repairs performed by unauthorized

servicers.

•Transportation of this product to and from

the designated service facility is the

responsibility of the consumer.

•Service calls that do not involve defects in

material or workmanship such as

customer education or improper

installation.

•Service calls that are related to external

problems, such as abuse, misuse,

inadequate electrical power, accidents,

fire, floods, or acts of God.

•Surcharges including, but not limited to,

any after hour, weekend, or holiday

service calls, tolls, ferry trip charges, or

mileage expense for service calls to

remote areas, including the State of

Alaska.

•Failure of the product if it is used for other

than its intended purpose.

•This warranty does not apply outside the

continental U.S.A.

WHAT IS NOT COVERED

Table des matières

Autres manuels Avanti Distributeur d'eau

Avanti

Avanti WD361 Manuel utilisateur

Avanti

Avanti WD361 Manuel utilisateur

Avanti

Avanti WD31 Manuel utilisateur

Avanti

Avanti WDT40Q3S-IS Manuel utilisateur

Avanti

Avanti WD360 Manuel utilisateur

Avanti

Avanti WDC750WIH Manuel utilisateur

Avanti

Avanti WDHC770I0W Manuel utilisateur

Avanti

Avanti WHC-59 Manuel utilisateur

Avanti

Avanti WD001 Manuel utilisateur

Avanti

Avanti WDTZ000 Manuel utilisateur

Avanti

Avanti WD362BP Manuel utilisateur

Avanti

Avanti WDBMC810Q3S Manuel utilisateur

Avanti

Avanti WDP75 Manuel utilisateur

Avanti

Avanti WDP69 Manuel utilisateur

Avanti

Avanti WID260P Manuel utilisateur

Avanti

Avanti WD29EC Manuel utilisateur

Avanti

Avanti WD99PS Manuel utilisateur

Avanti

Avanti WD30EC Manuel utilisateur

Avanti

Avanti WD50 Manuel utilisateur

Avanti

Avanti WDE98PS Manuel utilisateur

Avanti

Avanti WDT35EC Manuel utilisateur

Avanti

Avanti WIMD332PC-IS Manuel utilisateur

Avanti

Avanti WDR-52 Manuel utilisateur

Manuels Distributeur d'eau populaires d'autres marques

Monarch Water

Monarch Water ULTIMATE MINI AQUA HE Manuel utilisateur

Haier

Haier HLM-109B Manuel utilisateur

abc

abc Fleck 5600SXT Manuel utilisateur

GE GXOF18G Mode d'emploi

Kenmore

Kenmore 625.385560 UltraFilter 650 Manuel utilisateur

Innova

Innova CEV+ Guide de démarrage rapide

Aries

Aries Hydra DI Manuel

GE GNCF02H Manuel utilisateur

ProFlo

ProFlo PFB Series Manuel utilisateur

Hydrotech

Hydrotech 89DF HIM Manuel utilisateur

A.O. Smith

A.O. Smith FREZYA 300S Manuel utilisateur

Frakco

Frakco Travelsoft RV 2400HD Manuel utilisateur

GE GXSF30V Mode d'emploi

BRIO

BRIO CLCTTL520 Guide de l'utilisateur

3M HCD-1 Manuel utilisateur

Elkay

Elkay EFHFA8_2CJO Manuel d'installation

Coway

Coway CHP-671L Manuel utilisateur

Aqua Essentials

Aqua Essentials Borg & Overström B4 Manuel utilisateur