SGM G-PROFILE Manuel utilisateur

G‐PROFILE

MOVINGHEAD

Manual_G_Profile_EN_170x113,3.book Page 1 Wednesday, December 9, 2015 10:17 AM

Dimensions

135°

270° 270°

805

(31.7)

646

(25.4)

494

(19.5)

144

(5.7)

327

(12.9)

821

(32.3)

Min. c/c

764

(30.0)

492

(19.4)

470

(18.5)

664

(26.2)

135°

340

(13.4)

370

(14.6)

16 (0.63)

37 (1.46)

Measurements in millimetres

and inches (in brackets).

Drawing not to scale.

Manual_G_Profile_EN_170x113,3.book Page 2 Wednesday, December 9, 2015 10:17 AM

G‐PROFILE

USERMANUAL

all affiliated companies disclaim liability for any injury, damage, direct or indirect

loss, consequential or economic loss or any other loss occasioned by the use of, 

inability to use or reliance on the information contained in this manual. 

The SGM logo, the SGM Light name and all other trademarks in this document 

pertaining to services or products by SGM Light or its affiliates and subsidiaries are

trademarks owned or licensed by SGM Light or its affiliates or subsidiaries.

The original edition of this document is in English. All other language editions are

translations of the original edition.

This edition applies to firmware version 1.59 or later.

Rev. D

Manual_G_Profile_EN_170x113,3.book Page 3 Wednesday, December 9, 2015 10:17 AM

Dimensions ........................................................................................................................2

Safety information ..............................................................................................................7

Overview ..........................................................................................................................10

Unpacking ........................................................................................................................11

Transportation ............................................................................................................................................................... .11

Installation / Rigging .........................................................................................................12

Connecting AC power ......................................................................................................14

Control panel operations ..................................................................................................15

Using the control panel ................................................................................................................................................. .15

DMX start address ........................................................................................................................................................ .15

Selecting module (G-Profile or G-Spot) ........................................................................................................................ .15

Configuring the fixture using an Android device via RFID ............................................................................................ .16



SGM Tool App for Android ............................................................................................................................................ .16



Getting fixture information using Android and RFID ..................................................................................................... .16



Setting a DMX address and mode using Android and RFID ........................................................................................ .16

Contents

Manual_G_Profile_EN_170x113,3.book Page 4 Wednesday, December 9, 2015 10:17 AM

Using stand-alone operation ............................................................................................17

Manual control / Internal sequence editor ..................................................................................................................... .17

Using the editor ............................................................................................................................................................. .18

Editor ............................................................................................................................................................................ .18

Connecting to a DMX control device ................................................................................19

Configuring the device for DMX control ...........................................................................20

About DMX ................................................................................................................................................................... .20

Setting the DMX address .............................................................................................................................................. .20

LED refresh rate (Frequency) ..........................................................................................21

About LED refresh rate ................................................................................................................................................. .21

Setting the LED refresh rate (Frequency) via DMX ...................................................................................................... .21

Control panel menus ........................................................................................................22

Gobo replacement ............................................................................................................34

Identification of gobo wheel .......................................................................................................................................... .34

Replacing rotating gobo ................................................................................................................................................ .35

How to replace a gobo in a gobo holder ....................................................................................................................... .36

Maintenance .....................................................................................................................37

Upgrading the firmware ................................................................................................................................................ .37

Cleaning ........................................................................................................................................................................ .37

Manual_G_Profile_EN_170x113,3.book Page 5 Wednesday, December 9, 2015 10:17 AM

DMX protocols ..................................................................................................................38

Standard Mode ............................................................................................................................................................. .38

Extended Mode ............................................................................................................................................................. .51

Full Color Calibration and Color Temperature Correction ............................................................................................ .64

Effects ..............................................................................................................................65

Four individually controllable framing blades ................................................................................................................ .65

Independent rotating gobo wheel ................................................................................................................................. .65

Combination of framing techniques and rotating gobos ............................................................................................... .65

Effect wheel .................................................................................................................................................................. .66

High-precision pan and tilt ............................................................................................................................................ .66

Ultra high-speed strobe effect ....................................................................................................................................... .66

Prism ............................................................................................................................................................................. .66

Frost .............................................................................................................................................................................. .66

Fixtures and accessories .................................................................................................67

Included items ............................................................................................................................................................... .67

Ordering information ..................................................................................................................................................... .67

User’s notes .....................................................................................................................69

Manual_G_Profile_EN_170x113,3.book Page 6 Wednesday, December 9, 2015 10:17 AM

Safety information

The G-Profile is intended for professional use only. It is not suitable for household use. Impropre a l’usage domestique.

Review the following safety precautions carefully before installing or operating the fixture.

This product must be installed in accordance with the applicable installation code by a person familiar with the construction

and operation of the product and the hazards involved. Ce produit doit être installé selon le code d’installation pertinent,

par une personne qui connaît bien le produit et son fonctionnement ainsi que les risques inhérent.

Preventing electric shock



• Always power off/unplug the fixture before removing covers or dismantling product.

• Ensure that the mains power is off when wiring the fixture to the AC mains supply.

• Ensure that the fixture is electrically connected to earth (ground).

• Do not apply power if the fixture is in any way damaged.

• Do not immerse the fixture in water or liquid.

WARNING! Read the safety precautions in this section before



unpacking, installing, powering or operating this product.

WARNING! Risk of electric shock.

Manual_G_Profile_EN_170x113,3.book Page 7 Wednesday, December 9, 2015 10:17 AM

Preventing burns and fire

• Install in a location that prevents accidental contact with the fixture.

• Install only in a well-ventilated space.

• Install at least 0.3 m (12 in.) away from objects to be illuminated.

• Install only in accordance with applicable building codes.

• Ensure a minimum clearance of 0.1 m (4 in.) around the cooling fans.

• Do not paint, cover or modify the fixture.

• Keep all flammable materials away from the fixture.

• Allow the fixture to cool for 15 minutes after operation, before touching it.

CAUTION: Exterior surface temperature after 5 min. operation = 55° C (131° F). Steady state = 65° C (149° F)

WARNING! Take measures to prevent burns and fire.

Manual_G_Profile_EN_170x113,3.book Page 8 Wednesday, December 9, 2015 10:17 AM

Avoid personal injury 

• Do not look directly at the light source from close range.

• Take precautions to prevent injury when working at height.

• Ensure that the fixture is always securely fastened with suitable hardware.

• For elevated installations, secure the fixture with suitable safety cables, and always comply with relevant load 

dimensioning, safety standards and requirements.

WARNING! Take measures to prevent personal injury.

Manual_G_Profile_EN_170x113,3.book Page 9 Wednesday, December 9, 2015 10:17 AM

Overview

A:Panlock

B:Tiltlock

C : Base handle

D : Head fan grill (one of two shown)

E : Display panel

F : Safety wire attachment point

G:Fuse

H:DMXin

I : DMX out

J:Powerin

K : Power cord

The SGM G-Profile model is a framing version of the G-Spot Moving Head. 

The G-Profile is a maintenance free, multi-environmental fixture with an IP-rating 

of 65. It has a powerful LED light source, and a virtually unlimited color palette, four 

individually controllable framing blades, and can easily be controlled by wired and

wireless DMX. The fixture also offers RFID and NFC, low power consumption and an

expected lifetime of the multiple LED’s of 50,000 hours*.

* At 70% of luminous output under the manufacturer’s test conditions.

Manual_G_Profile_EN_170x113,3.book Page 10 Wednesday, December 9, 2015 10:17 AM

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SGM Projecteur

SGM

SGM X-5 Manuel utilisateur

SGM

SGM Q?2 White Manuel utilisateur

SGM

SGM G-SPOT Manuel utilisateur

SGM

SGM P-5 Wash Light Manuel utilisateur

SGM

SGM Q?7 Manuel utilisateur

SGM

SGM G-SPOT Manuel utilisateur

SGM

SGM P-2 WASH LIGHT Manuel utilisateur

SGM

SGM P-5 Wash Light Manuel utilisateur

SGM

SGM G-7 SPOT Manuel utilisateur

Manuels Projecteur populaires d'autres marques

VIZULO

VIZULO Micro Martin Guide de l'utilisateur

EuroLite

EuroLite LED IP FL-100 SMD Manuel utilisateur

Cooper Wheelock

Cooper Wheelock XB12 Manuel utilisateur

Allen + Roth

Allen + Roth 17624-000 Manuel utilisateur

ADJ

ADJ 4 STAGE PAK Manuel utilisateur

Cooper Lighting

Cooper Lighting EGL91SW233 Manuel utilisateur

Max

Max 37496 Manuel utilisateur

BEGA

BEGA 85 143 Manuel utilisateur

Beamz

Beamz 151.226 Manuel utilisateur

EuroLite

EuroLite LED IP FL-8 Manuel utilisateur

Ledj

Ledj PERFORMER 36 RGB Manuel utilisateur

Perel

Perel ELS3 Manuel utilisateur

Perel

Perel ELS3WD Manuel utilisateur

LumX

LumX LM 36130 Manuel utilisateur

Xtricity

Xtricity 4-80053 Manuel utilisateur

Stahl

Stahl 6521/4 Series Manuel utilisateur

Ecosense

Ecosense EcoSpec Manuel utilisateur

Ayrton

Ayrton minipanel FX Manuel utilisateur