SEOWON INTECH SWC-1104 Manuel utilisateur
SEOWON INTECH
Contents
1. Multi User CPE Configuration and Connection
1.1 Product Introduction ---------------------------------------- 4
1.2 Packaging Contents ---------------------------------------- 5
1.3 Description of Product Functions -------------------------- 6
1.4 Network Configuration -------------------------------------- 8
2. Multi User CPE Connection
2.1 Wired Connection -------------------------------------------- 10
2.2 WiMAX Wired Connection (CPE) ------------------------ 12
3. PC Configuration
3.1 Windows 98/ME Setup -------------------------------------- 14
3.2 Windows 2000 Setup ---------------------------------------- 18
3.3 Windows XP Setup ------------------------------------------ 22
4. MULTI USER CPE Internet Configuration with Internet
Setup Wizard
4.1 MULTI USER CPE built-in Web Server Access ------- 29
4.2 Run MULTI USER CPE Internet Setup Wizard -------- 30
5. Multi User CPE WiMAX Connection and Setup
5.1 IP Address Setup -------------------------------------------- 33
5.2 WiMAX Modem Setup ------------------------------------ 34
5.3 Modem Status Information -------------------------------- 35
6. Multi User CPE WAN Connection and Setup
6.1 IP Address Setup -------------------------------------------- 36
6.2 MAC Address Setup ---------------------------------------- 37
6.3 WAN Status Information ----------------------------------- 38
7. Multi User CPE LAN Setup
7.1 DHCP Server Setup --------------------------------------- 39
7.2 MAC Address Setup -------------------------------------- 40
7.3 LAN Status Information ---------------------------------- 41
8. Application Support Setup
8.1 Firewall Setup ---------------------------------------------- 42
8.2 Firewall regulation Setup(Filter) ------------------------ 43
8.3 Port Forwarding -------------------------------------------- 44
8.4 Port Trigger ------------------------------------------------- 45
8.5 DMZ Setup ------------------------------------------------- 46
8.6 UPnP Setup ------------------------------------------------- 47
8.7 VPN Passthrough Setup ---------------------------------- 48
8.8 QoS Setup --------------------------------------------------- 49
8.9 DDNS Setup ------------------------------------------------ 50
9. Switch Setup
9.1 Switch Basic Setup --------------------------------------- 51
9.2 Switch Advanced Setup --------------------------------- 52
9.3 Switch Status Information ------------------------------- 50
10. Administrator Function Setup
10.1 Administrator Password Setup ------------------------- 51
10.2 Setup ----------------------------------------------------- 52
10.3 Firmware Upgrade ------------------------------------- 53
11. WCM
11.1 Software Installation ----------------------------------- 54
11.2 How to use WCM -------------------------------------- 56
12. References
12.1 LAN CABLE Standard Materials ------------------- 63
12.2 IP Router PING Test Method ------------------------ 64
12.3 Product Specifications -------------------------------- 65
12.4 Troubleshooting -------------------------------------- 66
12.5 Product Warranty and Customer Support ---------- 68
1. Multi User CPE Configuration and Connection
1.1 Product Introduction
This product receives external WiMAX signals to construct in-building infrastructure on WiMAX
network and is covered by Ethernet network internally. The product serves as a relay as well as a USB
Modem and an internet router.
But the product is purposed to supply to users, focusing on a relay part rather than a modem.
It is also a wired and wireless internet router which allows several systems to use one internet address
supplied by high-speed internet service provider.
◎Functional Features
Possible of logically segmenting LAN, independent of physical
configuration
VLAN function
Converts the WAN IP address of router to domain URL **DDNS function
Manages basic firewall and IP/Port/Mac-based access
Firewall function
Simple internet connection supportInternet Wizard
Possible of VPN access to internal network inside the router from
external Internet
VPN Server function
Ensures/Limits speed by PC connected to routerQoS function
Possible of max. 253 wired and wireless PC connections and internet
router*
NAT function
Straight (Direct) or Cross Cable auto sensingCable Auto Sense
4 Port 10/100Mbps Ethernet Switch built-inLAN Port
ADSL, VDSL, Cable, LAN mode supportable to 10/100Mbps WANWAN Port
10/100Mbps wired LAN connectableIEEE802.3u Ethernet
Support
Wave1 = DL : 10Mbps / UL : 4MbpsIEEE802.16e WiMAX
Support
Features
Function
4
5
1.2 Packaging Contents
<Figure: Main Unit> <Figure: CD> <Figure: Antenna X 2>
<Figure: Quick Guide> <Figure: UTP Cable> <Figure: USB Cable>
<Figure: Adapter>
6
1.3 Description of Product Function
<Figure: MULTI USER CPE Front LED part>
ON when connected to PC, Flashing at communicationLAN 1~4
ON when connected to modem, Flashing at communicationWAN
Flashing at normal operation (Repeatedly ON/OFF at 0.1 sec
intervals)
WiMAX
Power Supply status (On at Power ON)PWR
Function
LED Indicator
Multi User CPE Lateral side
Description
Uses external PC power; Port used when
using WiMAX Modem’s sole function
USB
Slot for SIM Card when SIM authentication
required
USIM
: Default Setting; Main function Mode;
Mode for WiMAX, general router function
: WiMAX Modem dedicated Mode; If MULTI
USER CPE has no Power, you can use
WiMAX Modem function by using the USB
power of external PC.
Mode Switch
-Router
-Modem
Details
Item
SEOWONINTECH
7
1.3 Description of Product Function
MULTI USER CPE Rear Side
Description
System ResetRESET
PC or Hub connectionLAN 1~4
External modem connection portWAN
Power Adapter connection (DC 7.5V ~ 24V)DC IN
Power On/Off Switch (On/Off by pressing right or
left)
Power S/W
ANT1: WiMAX Diversity
ANT2: WiMAX Main
Separable external antenna
User external type antenna attachable
* Antenna Classification
-5:2.5GHz
External
Antenna
Details
Item
[Note] If you lost LOGIN password for router or IP address after change, use the Reset switch to restore its
original Factory Default settings.
8
1.4 Network Configuration
PC
Gateway modem
RJ45
Internet
WLAN
Local Network External Network
WiMAX
<MULTI USER CPE Connection Example>
Check cable connection and PC
power supply
ON when cable is connected
normally
LAN
Check cable connection and modem
power supply
ON when cable is connected
normally
WAN
Check if wireless module is attached
Flashing at 0.1 sec intervals
in normal operation
WiMAX
Check for adapter power failureON when connecting adapterPWR
Actions to be taken at failureNormal OperationLED
SEOWONINTECH
To Verify normal operation of router LEDs
You have to check if each LED of the router operates properly after connecting router, modem, and PC
with LAN cable as follows:.
9
1.4 Network Configuration
If LED light is not in “normal operation”, check if there is any failure according to actions to be taken.
Install a router after connecting to network.
„If normal connection between router and PC is checked, you have to set up PC and router.
„PC setup is to control network option such as Win98/2000/XP to enable to use Internet on condition that
PC is connected to router. It is progressed by referring to Chapter II, depending on OS type.
Router setup is to connect a router to Internet, which is suitable for the Internet line type that is connected
to router. It is progressed by referring to Chapter III, depending on Internet type.
10
2. Multi User CPE Connection
2.1 Wired Connection (WAN)
1) Connecting Power Adapter
Connect Power Adapter to AC terminal and then connect DC connector.
When turning the power switch on, only Power LED keeps lighting up and all other lamps are
turned ON
for about 1 second and then OFF.
When booting is completed, WiMAX lamps of MULTI USER CPE are flashing at about 0.1 sec
intervals.
Always use the rated adapter of the product for a router. If not, it may cause malfunction and damage.
2) Connecting Modem
Connect the LAN terminal of modem (varies depending on modem) and the WAN terminal of MULTI
USER CPE.
(In case of LAN mode Internet service, there is no modem but a LAN line from wall outlet. Connect the
LAN line of wall outlet to the WAN terminal.)
In case of internal modem, contact to the Internet service provider so as to replace it with an
external
type modem.
When LAN line is normally connected, the WAN lamp is ON, and flashing if there is any
communication.
3) Connecting PC
Connect the LAN card of PC or the LAN port of motherboard to the router LAN 1~4.
When connected normally, the appropriate LAN lamp is turned ON.
4) Connecting Hub
- To connect more than 4 PCs, do through Hub.
- Connect the LAN port of HUB and one of the router LAN 1~4.
- If connected normally, the LAN lamp and the lamp of the port connected to HUB are turned ON.
[Note]
* If connected to the UP-LINK of HUB, you cannot use the next port to UP-LINK.
* HUB and router connect to one port only. They cannot be used for more than 2 connections.
* Since this product has the cable auto sensing function, direct (straight) and cross cables can be freely
used when connecting LAN or WAN port.
Table des matières
Autres manuels SEOWON INTECH Modem
Manuels Modem populaires d'autres marques
Davicom
Davicom DM562AP Manuel utilisateur
EpiValley
EpiValley TATA indicom SXC-1080 Manuel utilisateur
Zte
Zte WiMAX Manuel utilisateur
Intelimax
Intelimax MA-2060 Manuel utilisateur
SMC Networks
SMC Networks D3CM1604V Manuel d'utilisation et d'entretien
Telstra
Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur
US Robotics
US Robotics 3453C Manuel utilisateur
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur
Zte
Zte MF823 Manuel utilisateur
Four-Faith
Four-Faith F1403 Manuel utilisateur
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manuel utilisateur
Gemtek
Gemtek WiMAX WIXFBR-103 Manuel utilisateur