SentrySafe SFW123GTF Manuel utilisateur

Fire-Safe – USB Connected

Owner’s Manual

REGISTRATION

registermysafe.com

Reasons to register: By registering your SentrySafe product you can easily retrieve forgotten

codes and combinations, which would otherwise require a notary letter and payment.

Contents include:

• Safe with 2 keys

• External USB-Y cable

(for computer connection)

• Magnetic clips to hold cable

• Owner's Manual/Warranty Card

Bolt-down hardware includes:

(2) Lag screws

(2) Washers

(2) Masonry anchors

Warnings

WARNING

Gun warning:This product is not intended for the secure storage of all materials. Items such as

ﬁrearms, other weapons, combustible materials, or medication should NOT be stored in this unit.

NOTICE

DO NOT store delicate items directly in your safe.

SentrySafe products, which offer ﬁre protection, have a proprietary insulation that has a high

moisture content. In addition, the SentrySafe advanced safes close airtight to offer water resistance,

which may also cause moisture to accumulate inside your safe. The desiccant packet included in

your safe during shipment should be left in your safe. DO NOT DISCARD IT. It is intended to help

absorb moisture which may accumulate inside your safe. Please open your unit once every two

weeks to avoid moisture accumulation.

If you choose to store delicate items such as jewelry with working parts, watches, stamps, or

photos in your safe, we recommend putting them in an airtight container prior to placing them in

the safe for storage.

NOTE: Sentry Group will not be responsible for any damage or loss of items placed in the unit

due to moisture.

DO NOT store pearls in this safe unit. In the event of a ﬁre, potential damage to delicate pearls

occurs at temperatures much lower than the 350°F interior performance measure which the UL

classiﬁcation performance standard indicated guarantees. Therefore, DO NOT store pearls in your

SentrySafe product.

DO NOT store computer disks, audio-visual media or photo negatives.This product is not intended

to protect computer ﬂoppy or 2-1⁄4" diskettes, cartridges and tapes, audio or video cassettes, or

photo negatives. For ﬁre-resistant storage of these materials, ask your retailer for the SentrySafe

Fire-Safe Media storage products.

YOUR SAFE IS ONLY PART OF YOUR TOTAL SECURITY PROTECTION.

SentrySafe recommends that you store your safe in closets, ofﬁces, basements, bedrooms and other

locations that are convenient for you but out of direct line of sight from prying eyes. The location of

the safe does not affect the safe’s ability to protect your

valuables inside.

English

Table Of Contents

Thank you for your purchase of a SentrySafe Product. SentrySafe is committed to securing,

organizing and protecting your most important documents, valuables and keepsakes.



Français ........................................................................................................................17

Español.........................................................................................................................33

English

Warnings ......................................................................................................................2

Table of Contents ..........................................................................................................3

Programmable Electronic Lock................................................................................... 4-7

Installing Computer Connector Cable.............................................................................8

Installing Storage Devices..............................................................................................9

Operating the Light .....................................................................................................10

Bolting Down Your Safe......................................................................................... 11-12

Troubleshooting Your Safe ...........................................................................................13

Replacement & Fire Speciﬁcations................................................................................14

Customer Service.........................................................................................................15

IMPORTANT

If you experience any problems or challenges with your safe, please contact us.

Many issues can be quickly resolved without the product being returned.

Programmable Electronic Lock

NOTE: Store code and keys in a secure location (other than in the safe).

NOTE: SentrySafe offers a secure online location for the entry and retrieval of your code.

Go to registermysafe.com and register your safe.

Ensure any shipping screws have been removed.

(Located on the inside of the door.)

ASlide out the battery drawer on the side of the keypad.

BInsert 4 AAA alkaline batteries (do not use rechargeable

batteries or other types of non-alkaline batteries).

CSlide battery drawer back into keypad.

NOTE: Do not use rechargeable batteries or any other type of non-alkaline battery. Do not mix

old and new batteries. Do not mix alkaline and other battery types.

Find your code on the back of this owner’s manual.

Remove key and store in a safe place.

WARNING

Test your code several times before putting valuables inside.

Insert key into the lock, turn to the “unlocked” position,

then remove the key.

This is a secondary locking feature, not an override key.

Without the key you will not be able to open your safe.

Preparing your safe for ﬁrst-time use

Unlocking your safe

M100TEST

SN100TEST01*

12345

English

Programmable Electronic Lock

AEnter the 5-digit factory code on the back of the

owner’s manual.

BA green light will indicate the code is correct. You

will have 4 seconds to turn the handle to unlock your safe.

Rotate the handle downward to open the door.

This may take a limited amount of force if you have a

water-resistant safe.

NOTE: Make sure the handle is in the horizontal position when unlocking the safe.

NOTE: If you exert too much force on the handle, the handle will move without moving the bolts.

When this happens, you will hear a “click.“ DO NOT be alarmed.This feature is designed

to protect the bolts from being over-powered by force. If this occurs, simply exert force in

the opposite direction (lifting up) until the handles “clicks” back into place and repeat

steps 1-3 to open your safe.

AClose the door and pull the handle upward until the handle

is horizontal. For water-resistant units, additional pressure

to the front left side of the door may need to be applied

prior to rotating the handle.

BInsert key into the lock, turn to the “locked” position, then

remove the key. Store key in a safe place.

NOTE: The 5-digit factory code cannot be deleted. However, you may add and delete

additional codes.

NOTE: If your safe does not appear to be working properly, please check to make sure you are

using NEW alkaline batteries before contacting SentrySafe Customer Service.

Locking your safe

Programmable Electronic Lock

Three code options:

FACTORY CODE:

The safe will ALWAYS unlock using this 5-digit code (found on the back of the owner’s manual).

This code cannot be deleted.

USER CODE:

A 5-digit programmable code of your choosing that can be changed or deleted.

SECONDARY CODE:

A 5-digit programmable code of your choosing that can be changed or deleted. Can only

be programmed after a user code has been activated.

NOTE: The “C” key is a clear key. This can be used at any time to clear the system and return

to standby mode – unless you are in delay mode (3 consecutive invalid entries).

NOTE: Only one user code can be programmed at a time.

To ADD a user code:

1Press the “P” key.

2Enter the 5-digit factory code.

3The light will ﬂash green and then you will have ﬁve

seconds to enter your own 5-digit personal user code.

To DELETE a user code:

1Press the “P” key.

2Enter the 5-digit factory code.

3Enter 0,0,0,0,0.

NOTE: The electronic lock will NOT indicate that it has deleted the user code – please test

the code to make sure it has been deleted.

Programming information

Programming the user code

English

Programmable Electronic Lock

NOTE: Only one secondary code can be programmed at a time.

To ADD a user code:

1Press the “P” key two times.

2Enter the 5-digit user code.

3The light will ﬂash green and then you will have ﬁve

seconds to enter your own 5-digit personal secondary code.

To DELETE a secondary code:

1Press the “P” key two times.

2Enter the 5-digit user code.

3Enter 0,0,0,0,0.

NOTE: The electronic lock will NOT indicate that it has deleted the secondary code –

please test the code to make sure it has been deleted.

NOTE: Delay mode will occur if three consecutive invalid entries have been tried.This will cause

the system to shut down for two minutes. Do NOT remove the batteries to restart the

system – it will only increase the length of time for the system to shut down.

Programming the secondary code

Installing Computer Connector Cable

Take the high-performance USB cable (included) and connect

the USB type B connection into the USB port on the outside

of the safe.

Plug the red USB connector into your computer or laptop.

Some USB devices require additional power to run properly.

If you ﬁnd that your device does not function properly, plug the

“aux power only” labeled connector into another USB port on

the computer.

To manage the cable position, attach magnetic clips to the side

of the safe to secure the cable to your desired position.

Connecting your computer and USB device

English

Installing Storage Devices

NOTE: Plug your USB powered storage device (Hard Drive/Flash Drive/etc.) into the internal USB

port on the inside of the safe door.

NOTE: For ease of storage, your external hard drive can be placed in the door pocket on the back

of the door.

Connecting a USB powered storage device

External Hard Drive

(not included)

Internal USB Port

Cable

(not included)

Internal USB Port

USB/Flash Drive

(not included)

WARNING

NEVER place or store magnetic clips (or anything magnetic) near electronic storage devices.

Loss of data and permanent damage to your electronic device(s) may occur.

Operating The Light

The safe you have purchased may include a light. This is a long-lasting LED light. Not all safes

include a light.

The batteries that operate the keypad are the same batteries that operate the light. If the light in

your unit does not turn on, please change your batteries. Refer to page 4 to change the batteries.

The light will turn on every time you enter your code and will remain on for 30 seconds.The light

duration has three options – off, 30 seconds, and 60 seconds*.

To turn the light off:

1Press the “0” button.

2Press the “P” button.

3Press the “3” button.

To turn the light on for 30 seconds:

1Press the “0” button.

2Press the “P” button.

3Press the “4” button.

To turn the light on for 60 seconds:

1Press the “0” button.

2Press the “P” button.

3Press the “5” button.

*If the light duration is 60 seconds, the battery life will decrease at a faster rate.

How to operate the light

Table des matières

Langues :

Autres manuels SentrySafe Sûr

SentrySafe

SentrySafe DH-109E Manuel utilisateur

SentrySafe

SentrySafe P005K Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe SFW205GQC Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe Manuel utilisateur

SentrySafe

SentrySafe QAP1E Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe Manuel utilisateur

SentrySafe

SentrySafe CHW30300 Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe SFW123DSB Manuel utilisateur

SentrySafe

SentrySafe 2B2100 Manuel utilisateur

SentrySafe

SentrySafe SFW123BTC Manuel utilisateur

SentrySafe

SentrySafe EF4738E Manuel utilisateur

SentrySafe

SentrySafe F2300 Manuel utilisateur

SentrySafe

SentrySafe Master Lock Fire-Safe FPW082FS Manuel utilisateur

SentrySafe

SentrySafe EF3428E Manuel utilisateur

SentrySafe

SentrySafe P008E Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe Manuel utilisateur

SentrySafe

SentrySafe P005K Manuel utilisateur

SentrySafe

SentrySafe X055 Manuel utilisateur

SentrySafe

SentrySafe FIRE SAFE Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe Manuel utilisateur

SentrySafe

SentrySafe Security Safe Series Manuel utilisateur

SentrySafe

SentrySafe TC8-331 Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe Manuel utilisateur

SentrySafe

SentrySafe X055 Manuel utilisateur

Manuels Sûr populaires d'autres marques

Squire

Squire Stronghold Keysafe Manuel utilisateur

Phoenix

Phoenix FS0352C Fiche d'information produit

Phoenix

Phoenix KS0030E Series Manuel utilisateur

Vaultek

Vaultek 10 Series Fiche technique

Arregui

Arregui CLASS Manuel utilisateur

Beaumont

Beaumont SMART KEYBOX Manuel utilisateur

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur

Hornady

Hornady SnapSafe Trunk Safe II Manuel utilisateur

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuel utilisateur

Honeywell

Honeywell 5912 Manuel utilisateur

Phoenix

Phoenix FS1280F Manuel utilisateur

Phoenix

Phoenix SS0992K Fiche d'information produit

Technomax

Technomax Trony Series Manuel

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuel utilisateur

RICHTER CZECH

RICHTER CZECH LA Manuel d'utilisation

Olymp

Olymp GOsafe 110 Manuel utilisateur

Phoenix

Phoenix SS0100E Fiche d'information produit

Clarke

Clarke Strong-Arm CS1000K Mode d’emploi