SentrySafe Fire-Safe Manuel utilisateur

Fire-Safe®Advanced

Electronic Lock

WARNING

This product is not intended for the secure storage of all materials.

Items such as ﬁrearms, other weapons, combustible materials, or medication should not be stored

in this unit.

WARNING

Do not store delicate items directly in your safe.

SentrySafe products which offer ﬁre protection have a proprietary insulation that has a high-

moisture content. In addition, the SentrySafe water resistant products close airtight to offer water

resistance, which may also cause moisture to accumulate inside your safe. The desiccant packet,

included in your safe during shipment, should be left in your safe. DO NOT DISCARD IT. It is

intended to help absorb moisture which may accumulate inside your safe. Please open your unit

once every two weeks to avoid moisture accumulation.

If you choose to store delicate items such as jewelry with working parts, watches, stamps, or

photos in your safe, we recommend putting them in an air-tight container, prior to placing them in

the safe for storage.

NOTE: Sentry Group will not be responsible for any damage or loss of items placed in the unit due

to moisture.

WARNING

DO NOT store pearls in this safe unit.

In the event of a ﬁre, potential damage to delicate pearls occurs at temperatures much lower

than the 350°F interior performance measure which the UL classiﬁcation performance standard

indicated guarantees.Therefore, DO NOT store pearls in your SentrySafe product.

WARNING

No computer disks, audio-visual media or photo negatives.

This product is not intended to protect computer ﬂoppy or diskettes, cartridges and tapes, audio or

video cassettes, or photo negatives.

WARNING

Your safe is only part of your total security protection.

SentrySafe recommends that you store your safe in closets, ofﬁces, basements, bedrooms and any

other locations that are convenient for you but out of direct line of sight from prying eyes. The

location of the safe does not affect the safe's ability to protect your valuables inside.

English

Table Of Contents

Congratulations on your purchase of a SentrySafe product. SentrySafe is committed to securing,

organizing and protecting your most important documents, valuables and keepsakes.

Table Of Contents..........................................................................................................3

Locking/Unlocking Your Safe..........................................................................................4

Programming Your Code(s) ............................................................................................6

Battery Replacement .....................................................................................................8

Troubleshooting ............................................................................................................9

Bolting Down Your Safe...............................................................................................10

Customer Service.........................................................................................................12

Guarantees and Fire Speciﬁcations...............................................................................13

IMPORTANT

If you experience problems or challenges with your safe, DO NOT RETURN!

For questions or concerns, call SentrySafe at 1-800-828-1438.

REGISTRATION

www.sentrysafe.com/customercare/register_your_product

Warranty Coverage Registration:

To aid with warranty coverage please visit www.sentrysafe.com/customercare/register_

your_product to register your safe, or complete the enclosed registration card and mail to

SentrySafe.

Locking/Unlocking Your Safe

NOTE: •Storecombinationandkeysinasecurelocation(otherthaninthesafe).

 •SentrySafeoffersasecureonlinelocationfortheentryandretrievalofyourcode.Goto

www.sentrysafe.com and register your safe.

 •DO NOT RETURN to store! Questions or concerns, call us at 1-800-828-1438.

A. Remove the screw from under the lock case to activate

your lock.

B. To be removed by consumer after purchase.

REMOVE THE SCREW LOCATED ON THE INSIDE OF

THE DOOR TO ACTIVATE YOUR LOCK

C. Turn the electronic lock case to the right (clockwise),

from 12 o’clock to 2 o’clock, and remove.

D. Insert 4 new AA alkaline batteries (not included).

NOTE: Do not use rechargeable batteries or any other type of

non-alkaline battery. Do not mix old and new batteries.

Do not mix alkaline and standard batteries.

E. Replace the lock case and turn to the left to reassemble.

See page 8 for detailed instructions.

Find your code on the back of this owner’s manual.

WARNING: Test your code several times before putting valuables inside.

FOR DUAL KEY/ELECTRONIC LOCKS ONLY, insert key into the

lock, turn to the unlocked position, then remove the key.

This is a secondary locking feature, not an override key.

Without the key you will not be able to open your safe.

Opening your safe for the ﬁrst time

CSW4747

BS445699*

2005

56299

Unlocking your safe

English

Locking/Unlocking Your Safe

Enter the 5 digit factory code on the back of this owner’s

manual. Then press the “Prog/Enter>>” key.

The unlocked padlock icon ( ) appears.

You will have 4 seconds to turn the handle to

unlock your safe.

Rotate the handle downward to open the door.

This may take a limited amount of force if you have

a water-resistant safe.

NOTE: •Ifyouexertexcessiveforceonthehandle,thehandlewillbreak.Thisfeatureisdesigned

to protect the bolts from being over powered by force.

 •GreenLEDlightcomesonafteryouentervalidcode,andremainslitduringthe

4-second period in which the safe can be opened.

A. Close the door, and pull the handle upwards until the handle

is horizontal.

For water-resistant units, additional pressure to the

front, left side of the door may need to be applied

prior to rotating the handle.

B. FOR DUAL KEY LOCK, insert key, push in lock cylinder, and

turn key to left to the locked position, then remove the key.

NOTE: •The5digitfactorycodecannotbedeleted.However,youmayaddanddeleteadditional

codes (see next page).

 •Ifyoursafedoesnotappeartobeworkingproperly,pleasechecktomakesureyouare

using NEW alkaline batteries before contacting SentrySafe Customer Care.

Locking your safe

Programming Your Code(s)

Three code options:

Factory code: The safe will ALWAYS unlock using this 5 digit

code (found on the back of this owner’s manual). This code

cannot be deleted.

Manager code: a 4-8 digit programmable code of your

choosing that can be changed or deleted.

Secondary code: If you wish to give someone else temporary

access to the safe, you can program a 4-8 digit secondary code

that can be changed or deleted.

NOTE: •Remember,onceyouhavedecidedonyouraccesscodes,opentheunitrstthentestit

with the door open.

 •Allzerosisaninvalidcode.

 •Toturnthebeeperonoroff,pressthe“0”keyandthenthe“Prog/Enter>>”key.

ONLY 1 CODE CAN BE PROGRAMMED AT A TIME

To ADD a manager code:

A. Press the “Prog/Enter>>” key

B. Enter the 5 digit factory code and press “Prog/Enter>>” key.

C. An empty box icon ( ) means no manager code is currently

programmed.A box with a star ( ) means a manager code

is currently programmed.

D. Enter a 4-8 digit code and press “Prog/Enter>>” key to

ﬁnish programming the code into the unit.

To DELETE a manager code:

A. Press the “Prog/Enter>>” key, then enter the 5-digit factory

code and then press the “Prog/Enter>>” key.

B. A box with a star ( ) indicates there is a code programmed

and can be deleted.

C. Enter 0, 0, 0, 0, 0 then the “Prog/Enter>>” key to delete the

manager code.

Programming information

Programming the manager code

English

Programming Your Code(s)

NOTE: •Upto6secondarycodescanbeprogrammed.Only1codecanbeprogrammed

at a time.

 •“PRG”(

PRG

) lights up after pressing the “Prog/Enter>>” key and stays lit while

programming a manager or user code.

 •To return to the beginning when programming your code, wait 5 seconds and the lock

will time out. You may then start over.

To ADD a secondary code:

A. Press the “Prog/Enter>>” key 2 times, enter the manager

code, and then press “Prog/Enter>>” key.

B. Use the <<or>> to scroll between the lighted boxes.

An empty box icon ( ) means it is available for a

code entry.

A box with a star ( ) means code has already been

programmed.

C. Enter a 4-8 digit code in the selected position and press the

“Prog/Enter>>” key to ﬁnish.

To DELETE a user code:

A. Press the “Prog/Enter>>” key 2 times, enter the manager

code, and then press the “Prog/Enter>>” key.

B. Use the <<or>> to scroll to the A box with a star icon ( )

to be removed.

C. Press 0, 0, 0, 0, then the “Prog/Enter>>” key to delete the

selected user.

Programming the secondary code

Battery Replacement

The battery icon ( ) will light when the batteries need to be replaced. No code is erased when

the old batteries are removed for replacement.

Insert 4 new alkaline batteries (not included)

Remove screw located under lock

Turn the electronic lock case to the right (clockwise),

from 12 o’clock to 2 o’clock, and remove.

Insert 4 new AA alkaline batteries.

Replace the lock case, and turn to the left to reassemble.

NOTE: Do not use rechargeable batteries or any other type of non-alkaline battery. Do not mix old

and new batteries. Do not mix alkaline and standard batteries.

Battery replacement

English

Troubleshooting

The problem: Why it is happening: The solution:

The door will

not lock

Shipping screw is in place Remove the screw on the

back of the door

Electronic code

does not open

safe

The key lock cylinder is pushed in You must use both the key

and electronic code to open

the safe; key lock cylinder

must be out

Electronics are not

functioning

Battery power is low ( ) Replace batteries and enter

code again

Electronics

working but

cannot get in

to safe

1. Safe doors equipped with a

water-resistant gasket may

initially be tight

-OR-

2. Battery power is too weak to

open safe

1. Hold the handle up while

inputting the code; and

then pull down when the

unlocked padlock icons

appears ( )

2. Replace batteries and enter

code again

Lock display

shows

1. You have pressed “Prog/

Enter>>” key out of sequence

2. You have entered an invalid

code

3. You have let 5 seconds or more

elapse between key presses

4. You have pressed a key while in

delay mode

Wait 5 seconds and start over

Lock display

shows

You are in delay mode; the icon

( ) comes on after three

consecutive invalid codes are

entered, and stays lit during the

2-minute delay mode

Wait 2 minutes and start over

Lock display

shows battery

icon

Battery power is low. Lock may

light up but battery power might

be too low to operate the bolts

Replace batteries

Bolting Down Your Safe

Bolt down kit contents (in select models only):

• 2Lagscrews.

• 2Washers.

• 2Masonryanchors.

Tools needed to bolt safe to the ﬂoor:

• Drill.

• Wrench.

• 7⁄16" (11 mm) drill bit – for drilling into the safe.

• 9⁄32" (7.2 mm) drill bit – for drilling into a wood ﬂoor.

• 3⁄8" (9.5 mm) drill bit – for drilling into a masonry ﬂoor.

Warning: •DONOTdrillthroughboltcups.

 •DONOTboltthroughthewalls.

 •DONOTdrillfromanylocationinsidethesafe.

1Tip the safe onto its left side (door hinges horizontal with the ﬂoor).

2Unlock the safe, and open the door. Look to the bottom of the

safe for two indentations on the feet in opposite corners. Using

the 7⁄16" (11 mm) bit, drill a hole through each indentation

perpendicular to the bottom of the safe. Do NOT drill from

any location inside the safe.

3Tip the safe upright, place the safe in the desired location, and open the door.

4Use a screw or pencil to mark the ﬂoor through both holes.

Bolt down instructions

Warning: Product is not water resistant once it is bolted down. The ETL veriﬁed water

resistance claim applies to product prior to the application of a bolt-down kit.

Autres manuels pour Fire-Safe

Table des matières

Autres manuels SentrySafe Sûr

SentrySafe

SentrySafe EF3428E Manuel utilisateur

SentrySafe

SentrySafe SF123ES Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe SFW123DSB Manuel utilisateur

SentrySafe

SentrySafe P44721 Manuel utilisateur

SentrySafe

SentrySafe PL048E Manuel utilisateur

SentrySafe

SentrySafe SFW123GTF Manuel utilisateur

SentrySafe

SentrySafe Master Lock Fire-Safe FPW082FS Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe Manuel utilisateur

SentrySafe

SentrySafe P005K Manuel utilisateur

SentrySafe

SentrySafe DH-109E Manuel utilisateur

SentrySafe

SentrySafe P008E Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe Manuel utilisateur

SentrySafe

SentrySafe 2B2100 Manuel utilisateur

SentrySafe

SentrySafe F2300 Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe SFW205GQC Manuel utilisateur

SentrySafe

SentrySafe P005C Manuel utilisateur

SentrySafe

SentrySafe P005K Manuel utilisateur

SentrySafe

SentrySafe H060ES Manuel utilisateur

SentrySafe

SentrySafe CHW30300 Manuel utilisateur

SentrySafe

SentrySafe QAP1E Manuel utilisateur

SentrySafe

SentrySafe Home Defense Center Manuel utilisateur

SentrySafe

SentrySafe SentrySafe Manuel utilisateur

SentrySafe

SentrySafe Fire-Safe Manuel utilisateur

SentrySafe

SentrySafe TC8-331 Manuel utilisateur

Manuels Sûr populaires d'autres marques

Squire

Squire Stronghold Keysafe Manuel utilisateur

Phoenix

Phoenix FS0352C Fiche d'information produit

Phoenix

Phoenix KS0030E Series Manuel utilisateur

Vaultek

Vaultek 10 Series Fiche technique

Arregui

Arregui CLASS Manuel utilisateur

Beaumont

Beaumont SMART KEYBOX Manuel utilisateur

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur

Hornady

Hornady SnapSafe Trunk Safe II Manuel utilisateur

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuel utilisateur

Honeywell

Honeywell 5912 Manuel utilisateur

Phoenix

Phoenix FS1280F Manuel utilisateur

Phoenix

Phoenix SS0992K Fiche d'information produit

Technomax

Technomax Trony Series Manuel

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuel utilisateur

RICHTER CZECH

RICHTER CZECH LA Manuel d'utilisation

Olymp

Olymp GOsafe 110 Manuel utilisateur

Phoenix

Phoenix SS0100E Fiche d'information produit

Clarke

Clarke Strong-Arm CS1000K Mode d’emploi