SENSIT Technologies GLT Manuel de programmation

Quick-Start Instructions

This is not a substitute for the

instruction manual. It is for

reference only.

Read and understand the

instruction manual before use.

MADE IN THE USA

WITH GLOBALLY SOURCED COMPONENTS

Distributed by:

851 Transport Drive

Valparaiso, IN 46383-8432

Phone: 219 465 2700

Web: www.gasleaksensors.com

Innovative Detection Solutions

1. Turn on G2-GLT Device and Tablet (for the

tablet press and hold the top right button).

2. Wait until G2-GLT displays ‘WAITING FOR

TRAINER’ on screen.

3. Note: If G2-GLT Device has passed

‘WAITING FOR TRAINER’ screen (Either

you have skipped or it has already been

connected with application), It will take you

directly to the Instrument screen.

4. Launch the GLT application (if it does not

auto launch).

5. Tap the “Connect”

6. After the connection has been made, tap

either of the two options

7. Training Mode: It will put device in

simulation mode and allows trainer to

control device (sensors are inactive).

8. Monitoring Mode: It will put device in

Normal mode and allows trainer to monitor

remotely (sensors are active).

9. The G2-GLT will continue through warm-up

and arrive at the work display.

10. The tablet will display the G2-GLT screen

with adjustable slide bars if in “training

mode” or just the screen if in “monitor

mode”.

SENSIT®G LT

QUICK-START INSTRUCTIONS

11. The training modules will be displayed

simultaneously on the right hand side or

bottom side of the screen depending on the

orientation of the tablet.

12. Note: If you need to switch the mode, you

need to ‘Disconnect’ and Restart the ‘G2-GLT

Device’.

13. Note: If any congurations or mode changes

on ‘G2-GLT Device’, please power cycle the

G2-GLT and connect to the application again.

Autres manuels SENSIT Technologies Instrument de mesure

SENSIT Technologies

SENSIT Technologies IRED Manuel de programmation

SENSIT Technologies

SENSIT Technologies ULTRA-TRAC APL Manuel utilisateur

SENSIT Technologies

SENSIT Technologies VMD Manuel de programmation

SENSIT Technologies

SENSIT Technologies P400 Manuel de programmation

SENSIT Technologies

SENSIT Technologies Trak-It IIIa GLT Manuel utilisateur

SENSIT Technologies

SENSIT Technologies HCN Manuel de programmation

SENSIT Technologies

SENSIT Technologies SPOD C1D2 Manuel utilisateur

SENSIT Technologies

SENSIT Technologies HXG-2 Manuel de programmation

SENSIT Technologies

SENSIT Technologies Trak-It IIIa GLT Manuel de programmation

SENSIT Technologies

SENSIT Technologies GOLD EXCO+1200 Manuel de programmation

SENSIT Technologies

SENSIT Technologies CO Manuel de programmation

SENSIT Technologies

SENSIT Technologies GAS-TRAC LZ-30 Manuel utilisateur

SENSIT Technologies

SENSIT Technologies ULTRA-TRAC APL Manuel utilisateur

SENSIT Technologies

SENSIT Technologies GOLD Manuel de programmation

SENSIT Technologies

SENSIT Technologies ULTRA-TRAC APL Manuel utilisateur

SENSIT Technologies

SENSIT Technologies GOLD CGI Manuel de programmation

SENSIT Technologies

SENSIT Technologies HCN Manuel de programmation

SENSIT Technologies

SENSIT Technologies GOLD CGI Manuel utilisateur

SENSIT Technologies

SENSIT Technologies ULTRA-TRAC APL Manuel utilisateur

SENSIT Technologies

SENSIT Technologies GAS-TRAC LZ-30 Manuel utilisateur

SENSIT Technologies

SENSIT Technologies HXG-2d Manuel de programmation

SENSIT Technologies

SENSIT Technologies HXG-3P Manuel de programmation

SENSIT Technologies

SENSIT Technologies GAS-TRAC LZ-30 Manuel de programmation

SENSIT Technologies

SENSIT Technologies SPOD Guide rapide

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur