Sennheiser EPOS MB Pro Series Manuel utilisateur

EPOS|Sennheiser - Firmware updates, battery replacements and

factory resets

To update the firmare on your EPOS|Sennheiser device, first download the EPOS Connect App to

your computer. CLICK HERE.

Then connect your headset.

Corded USB headsets

Easy peasy, just make sure it’s plugged in!

Bluetooth Headsets

Adapt 200 and above models;

Ensure the dongle AND the headset are connected. You’ll need to connect the headset by a USB

cable.

MB Pro models

Insert your thumbnail between the headset and the leatherette earpad (on the same side of the

headset as the microphone boom arm) and remove, with the plastic ring to reveal the micro-USB

port located underneath and then use a micro-USB to USB cable to connect it with your PC. If you

have a USB dongle you should also plug this in.

DECT Wireless Headsets (SDW models, D10PH, D30PH, DW models)

Connect the base unit to a PC. If your headset isn’t designed to work with a computer (ie is

deskphone only) you’ll still have a micro usb port on the back and can connect to a PC via a micro-

usb to USB cable.

The EPOS Connect app will recognise your headset or dongle and list it. Check the updates page and

update the firmware accordingly.

Factory Reset for DECT Headsets only

First ensure that all power sources have been disconnected (both via USB and mains supply).

Wait a moment to ensure there is no residual charge left in the base station.

On the back of the base, press and hold the reset button (the small black button located near the

tiny white DIP switches). NB on the SDW series headsets there are 2 buttons; S1 and S2. You’ll

need to use S1.

Whilst continuing to press the reset button, reconnect power to the base. Once power has been

reconnected, you may release the reset button.

The base station should now carry out a reset

Battery Reset

For an MB Pro or Pro UC headset ONLY

1. Turn the headset off (hold the multifunction button for two seconds; this should be

followed by the voice prompt "powering off" and the LED flashing red three times.

2. Press and hold the multifunction button until the LED flashes alternately red and blue

(this indicates that the device has entered pairing mode).

3. Simultaneously press and hold the multifunction button and the audio button (volume

control button) for five seconds until the LED flashes purple three times, and then re-

enters pairing mode (indicated by the LED flashing alternately red and blue).

4. The headset has been reset.

Battery installation videos

For a DW Office or D10: https://www.youtube.com/watch?v=k6h2sTyaZeA

For a DW Pro 1: https://www.youtube.com/watch?v=nOPyEY56bKw

For a DW Pro 2 or D30: https://www.youtube.com/watch?v=GE9SjRllJ7U

For an SDW Mono / Stereo https://www.eposaudio.com/en/au/enterprise/support/knowledge-

base/dect-headsets/troubleshooting/sdw-3060-hs---replacing-the-battery

Other headsets do not have a replaceable battery

Ce manuel convient aux modèles suivants

8

Table des matières

Autres manuels Sennheiser casque

Sennheiser

Sennheiser MM 80i TRAVEL Manuel utilisateur

Sennheiser

Sennheiser HD 250BT Manuel utilisateur

Sennheiser

Sennheiser HMEC 26-2 Manuel utilisateur

Sennheiser

Sennheiser SC 635 Manuel utilisateur

Sennheiser

Sennheiser RS 130 Manuel utilisateur

Sennheiser

Sennheiser DW Office Phone Manuel utilisateur

Sennheiser

Sennheiser PC 230 Manuel utilisateur

Sennheiser

Sennheiser U 320 Manuel utilisateur

Sennheiser

Sennheiser SH 350 IP Manuel utilisateur

Sennheiser

Sennheiser GSP 670 Manuel utilisateur

Sennheiser

Sennheiser 27 Series Manuel utilisateur

Sennheiser

Sennheiser PC 141 Manuel utilisateur

Sennheiser

Sennheiser HMD 46 - ANNEXE 863 Manuel utilisateur

Sennheiser

Sennheiser M3AEBTXL Manuel utilisateur

Sennheiser

Sennheiser PC 131 Manuel utilisateur

Sennheiser

Sennheiser URBANITE Manuel utilisateur

Sennheiser

Sennheiser CX 7.00BT Manuel utilisateur

Sennheiser

Sennheiser HMEC 466 Manuel utilisateur

Sennheiser

Sennheiser DW Office Phone Manuel utilisateur

Sennheiser

Sennheiser SC 230 USB Manuel utilisateur

Sennheiser

Sennheiser SDW 5013 Manuel utilisateur

Sennheiser

Sennheiser Presence Headset Manuel utilisateur

Sennheiser

Sennheiser DW Pro 2 Manuel utilisateur

Sennheiser

Sennheiser SC 30 USB CTRL Manuel utilisateur

Manuels casque populaires d'autres marques

Sena

Sena SMH10 Manuel utilisateur

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuel utilisateur

Doro

Doro Flexus HS2005 Manuel utilisateur

GE

GE 98971 Manuel utilisateur

Hama

Hama 00184070 Manuel utilisateur

Plantronics

Plantronics Blackwire 3200 Series Manuel utilisateur

Blue Tiger

Blue Tiger Advantage PLUS Manuel utilisateur

Jawbone

Jawbone Icon Manuel utilisateur

Jabra

Jabra FR 20 Manuel utilisateur

Roxcore

Roxcore Flow A+ Manuel utilisateur

Turtle Beach

Turtle Beach XP 510 Manuel utilisateur

Philips

Philips SHB6101 Manuel utilisateur

Jabra

Jabra PRO 9460 Duo Manuel utilisateur

HyperX

HyperX HyperX Cloud Flight Manuel utilisateur

Bose

Bose MIE2 Mobile Manuel utilisateur

Jabra

Jabra Steel Manuel utilisateur

HyperX

HyperX cloud ii Manuel utilisateur

Southwing

Southwing SA505 Manuel utilisateur