Seiko Epson VG-4513CA Manuel utilisateur

INFORMATION

Model :

VG-4513CA

DATE :

12th. Sep. 2013

SEIKO EPSON CORPORATION

8548 Nakaminowa,

Minowa-machi, Kamiina-gun,

Nagano-ken

399-4696 Japan

OUT-13-0473 rev.2

INTRODUCTION

1. The contents is subject to change without notice.

Please exchange the specification sheets regarding

the product’s warranty.

2. This sheet is not intended to guarantee or provide

an approval of implementation of industrial patents.

3. We have prepared this sheet as carefully as possible.

If you find it incomplete or unsatisfactory in any

respect, We would welcome your comments.

OUT-13-0473 rev.2

SPECIFICATIONS

1. Application

1) This specifications apply to Crystal oscillator VG-4513CA for Alcatel-Lucent.

2) This product is compliant with RoHS Directive.

3) This Product supplied (and any technical information furnished, if any) by SEIKO EPSON CORPORATION.

Corporation shall not be used for the development and manufacture of weapon of mass destruction

or for other military purposes. Making available such products and technology to any third party

who may use such products or technologies for the said purposes are also prohibited.

4) This product listed here is designed as components or parts for electronics equipment in general

consumer use. We do not expect that any of these products would be incorporated or otherwise

used as a component or part for the equipment, which requires an extra high reliability, such as

satellite, rocket and other space systems, and medical equipment, the functional purpose of which

is to keep life.

2. Product No. / Model

The model is VG-4513CA-122.880000-GHCT /GGCT, VG-4513CA-491.52MHz-GFCT.

3. Packing

It is subject to the packing standard of SEIKO EPSON CORPORATION.

4. Warranty

Defective parts which are originated by us are replaced free of charge in case defects are found within 12 months

after delivery.

5. Amendment and abolishment

Amendment and/or abolishment of this specification are subject to the agreement between both parties.

6. Contents

Item No. Item Page

[ 1 ] Absolute maximum ratings 2

[ 2 ] Operating range 2

[ 3 ] Frequency characteristics 2-3

[ 4 ] Terminal description 4

[ 5 ] Electrical characteristics 5

[ 6 ] Test circuit 6

[ 7 ] Timing chart 7-8

[ 8 ] Reflow condition 8

[ 9 ] Dimensions and marking layout 9-10

[ 10 ] Board patterning 10

[ 11 ] Notes 11-12

OUT-13-0473 rev.2

[ 1 ] Absolute maximum ratings

Parameter Symbol

Value Unit

Note

Supply voltage V

-0.5 to +5.0 V

Input voltage Vc -0.5 to V

+0.5 V Vc Terminal

Storage temperature range *

T_stg -55 to +125 °C Stored as bare product after unpacking.

* Concerning the frequency change, please refer [8] Environmental and mechanical characteristics.

[ 2 ] Operating range

Parameter Symbol

Value Unit

Note

Min. Typ. Max.

Supply voltage V

3.135 3.300 3.465 V *1

Supply voltage GND 0.0 0.0 0.0 V

Control voltage V

0.00 1.65 3.30 V

Output frequency fo - 122.880

491.520

- MHz

Operating temperature range T_use -40 +25 +85 °C

Output load condition L_ECL

- 50 - Ω At Vcc-2.0V

*1 Start up time(0 %V

90 %V

) of power source should be more than 150 µs.

*2 By-pass capacitor (approx. 0.01 µF to 0.1 µF) should be placed closely between Vcc and GND.

[ 3 ] Frequency characteristics

Test condition is Vcc=3.3V, Vc=1.65V, at +25°C, unless otherwise noted.

Output frequency (f

) ........................... 122.880000 MHz, 491.520000MHz

Parameter Symbol Value[1 ×10

−

] Note

Frequency tolerance *

f tol

50 122.88MHz

70 491.52MHz

* This includes initial frequency tolerance, temperature variation,

supply

voltage

variation,

and 10 years aging(at 25 °C).

OUT-13-0473 rev.2

Output Frequency characteristics

Parameter Symbol

Value Unit Note

Min. Typ. Max.

Pull range

Vc=1.65V±1.65V PR

±100 - -

×10

-6

122.880MHz-GGCT

±150 - - 122.880MHz-GHCT

±100 - - 491.520MHz-GFCT

Absolute pull range *1

Vc=1.65V±1.65V APR

±50 - -

×10

-6

122.880MHz-GGCT

±100 - - 122.880MHz-GHCT

±30 - - 491.520MHz-GFCT

Input resistance Rin 100 - - kΩVc terminal ( DC level )

Frequency tuning

linearity f

LIN

- - 5 %

Modulation band

width BW 10 - - kHz ±3dB

Frequency change

polarity - Positive polarity -

*1 APR = Pull range – Frequency tolerance

Vc(V)

Vc=Typ.

Vc=Min.

Vc=Max.

+Fcont

-Fcont

+a +f

LIN

=+a/(+Fcont-(-Fcont))×100

Frequency

(×10

)

+Fcont-(-Fcont)

-a -f

LIN

=-a/(+Fcont-(-Fcont))×100

Example of controling freaquency characteristics

OUT-13-0473 rev.2

[ 4 ] Terminal description

Name No. Type Terminal description

Vc #1 INPUT Vc terminal

OE #2 󲷌OE terminal / Active High

GND #3 󲷌GND terminal(*1)

OUT1 #4 OUTPUT

(Positive) Clock output terminal

OUT2 #5 OUTPUT

(Negative) Clock output terminal(Inversion output of #4)

Vcc #6 󲷌Vcc terminal

* The metal part of the surface (metal cap) is connected to GND.

LOT No.

VAA

FREQUENCY

(A)

(B)

(D)

(C)

OUT-13-0473 rev.2

[ 5 ] Electrical characteristics

Test condition is Vcc=3.3V, Vc=1.65V, at +25°C, unless otherwise noted.

Parameter

Symbol

Value

Unit

Note

Min.

Typ

Max

Start up time t

OSC

- - 10 ms 0 sec at 90 % Vcc

Current consumption Icc - - 65 mA

Rise time (*1) tr - - 0.5 ns 20 %Vcc 80 %Vcc

Fall time (*1) tf - - 0.5 ns 80 %Vcc 20 %Vcc

Symmetry (*1) SYM 40 - 60 % 50 %Vcc Level

High level output voltage

VOH Vcc-1.1

- - V

Low level output voltage

VOL - - Vcc-1.5

High level input voltage VIH 70 %Vcc

- - V

Low level input voltage VIL - - 30 %Vcc

Disable time tpxz - - 1 µs OE terminal HIGH →LOW

Enable time tpzx - - 1 µs OE terminal LOW →HIGH

Please see [6] Test circuit.

(*1) Please see [7] 1) Output waveform.

Phase Noise Characteristic [unit: dBc/Hz] @all operating temperature range

Offset

frequency

Frequency – Type

122.880MHz-GGCT 122.880MHz-GHCT 491.520MHz-GFCT

Typ. Max. Typ. Max. Typ. Max.

10Hz -74 -60 -72 -58 -56 -42

100Hz -106 -90 -102 -86 -88 -76

1kHz -128 -121 -125 -118 -114 -103

10kHz -146 -140 -143 -137 -136 -126

100kHz -150 -145 -149 -144 -150 -144

1MHz -150 -145 -149 -144 -150 -146

10MHz -150 -145 -149 -144 -151 -146

G sensitivity

2 ppb/g Max. (vibration frequency: 20Hz to 200Hz, acceleration: 2g, 3 dimensions)

OUT-13-0473 rev.2

[ 6 ] Test circuit

1) To observe waveform and current

2) Condition

(1) Oscilloscope

• Bandwidth should be 5 times higher than DUT’s output frequency.

• Probe ground should be placed closely from test point and lead length should be as short as possible.

(2)

By-pass capacitor (approx. 0.01

F󲸝0.1

F) should be placed closely between Vcc and GND

(3) Use the current meter whose internal impedance value is small.

(4) Power supply

• Start up time

(0 V→90 %Vcc)

of power source should be more than 150 us.

• Impedance of power supply should be as low as possible.

1



F

k





y c

k





y c

0





2





0





2





＊

＊＊

＊P

]]

]

. V

. O

. G

((

))

)

. O

2 (

((

))

)

. V

OUT-13-0473 rev.2

[ 7 ] Timing chart

1) Output wave form and measurement level

Vcc

80 % of amplitude

20 % of amplitude

GND

Vcc-2 V OUT1

SYM = tw / t

OUT2

2) Output Signal timing

3) Vc control timing

󲷉Please rise up the Vc voltage after the Vcc voltage rises up.

90%Vcc

Vcc

OUT

Probe timing

Vcc

tosc Probe start

Table des matières

Autres manuels Seiko Epson Unité de contrôle

Seiko Epson

Seiko Epson WLU3072-D69 Mode d’emploi

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur