Sega Saturn Taget Box Manuel utilisateur
NOTICE
When using this document, keep the following in mind:
1. This document may, wholly or partially, be subject to change without notice.
2. All rights are reserved: No one is permitted to reproduce or duplicate, in any form,
the whole or part of this document without SEGA’s permission.
3. SEGA will not be held responsible for any damage to the user that may result from
accidents or any other reasons during operation of the user’s equipment, or programs
according to this document.
4. Software, circuitry, and other examples described herein are meant merely to
indicate the characteristics and performance of SEGA’s products. SEGA assumes no
responsibility for any intellectual property claims or other problems that may result
from applications based on the examples describe herein.
5. No license is granted by implication or otherwise under any patents or other rights
of any third party or SEGA Enterprises, Ltd.
6. This document is confidential. By accepting this document you acknowledge that
you are bounded by the terms set forth in the non-disclosure and confidentiality
agreement signed separately and/in the possession of SEGA. If you have not signed
such a non-disclosure agreement, please contact SEGA immediately and return this
document to SEGA.
(4/20/94-001)
TM
SEGA Saturn Target Box
User’s Manual
Programming Box/Graphics Box
(Provisional Version)
Doc. # ST-174-R2-090294
SEGA
© 1994SEGA. Allrightsreserved.
REFERENCES
In translating/creating this document, certain technical words and/or phrases were
interpreted with the assistance of the technical literature listed below.
1. KenKyusha New Japanese-English Dictionary
1974 Edition
2. Nelson's Japanese-English Character Dictionary
2nd revised version
3. Microsoft Computer Dictionary
4. Japanese-English Computer Terms Dictionary
Nichigai Associates
4th version
(This page was blank in the Japanese original)
History
Version 1: (July 15, 1994)
• New creations for use in the SEGA Saturn Programming Box/Graphics Box
ST-174-R2-090294
SEGA Enterprises, Ltd.
(RDJ,7/18/94)
i
Introduction
This manual describes the functions and usage of the SEGA Saturn Target Box
manufactured by SEGA Enterprises, Ltd. and applies to the SEGA Saturn Target Box
Programming Box and Graphics Box. Products and product specifications of the
SEGA Saturn Target Box may be changed without prior notice.
Language Description
The language used in this manual is described as follows.
Target Box
SEGA Saturn Target Box in this manual in shortened to just Target Box.
This system is used for developing SEGA Saturn game software.
This system has functions for efficient development, as well as the same functions
as the custom chip used in Saturn. The functions are divided as follows:
• Programming development environment function
• Graphics development environment function
Programming Box
This is the target box for SEGA Saturn program development. It supports a CD
drive, a virtual CD system interface connector, extended memory, etc.
Graphics Box
This is the target box for SEGA Saturn graphics development. Specifications are
nearly the same as the Programming Box; however, the following functions are not
supported:
• CD Drive
• Virtual CD System
• Extended memory
ST-174-R2-090294
SEGA Enterprises, Ltd.
(RDJ,7/18/94)
ii
Programming Development Environment
To emulate the SH-2 CPU on the main board, the main board can be connected to
EVA board and ICE.
The programming development environment is configured as described earlier.
Graphics Development Environment
The following functions are configured in the game graphics development
environment with multiple boards.
• VDP 1 function
• VDP 2 function
• DSP function
• System control function
Refer to the hardware manual for each function.
Sound Function
When loaded onto the main board, the sound function is an environment for
producing game sounds. The following functions can be used.
• SCSP function
• Sound board control CPU MC68EC000
A-Bus Board
The A-Bus board is for interfacing with the A-Bus in such cases as ROM cartridges,
etc. Cartridge connector, SCSI controller, and RS-232C controller are loaded.
Main Board
This board provides both a graphics development environment and program
development environment. Circuits for achieving graphics and program
development environment functions are loaded on this board. The main
board is connected with ICE, EVA board and CPU board.
ICE (In-Circuit Emulator)
The abbreviation for "In-Circuit Emulator". In this manual, this indicates E7000,
SH-2 POD and the emulator for emulating the main CPU SH-2 CPU of the Target
Box.
ST-174-R2-090294
SEGA Enterprises, Ltd.
(RDJ,7/18/94)
iii
POD
This unit is connected to the E7000 body with an interface cable. CPU is emulated by
inserting a PGA plug in front of the POD to the SH-2 CPU socket.
E7000
BODY POD PGA plug
Main board
PGA (Pin Grid Array)
PGA comes from the grid-like array of male pins.
EVA Board (Evaluation Board)
This indicates SH-2 EVA board and the emulator for emulating main CPU (SH-2
CPU) of Target Box.
SH-2 Board
The SH-2 CPU, being the main control CPU, is mounted on this board. ICE (or the
EVA board) can be substituted for the SH-2 board.
The connector that links the SH-2 board to the main board uses the same connector
as is used for connecting the EVA board. The SH-2 board is normally loaded on the
slave side in the Programming Box and on the master side in the Graphics Box.
ST-174-R2-090294
SEGA Enterprises, Ltd.
(RDJ,7/18/94)
iv
(This page was blank in the Japanese original)
ST-174-R2-090294
SEGA Enterprises, Ltd.
(RDJ,7/18/94)
v
TABLE OF CONTENTS
Introduction i
Language Description i
List of Figures vii
List of Tables vii
Chapter 1 The Appearance 1
1.1 The Appearance and Name of Each Section 2
Front View 2
Right Side View 4
Rear View 5
Top View 6
Chapter 2 Unpacking and Installation 9
2.1 Unpacking and Inspecting Accessory Parts 10
2.2 Target Box Installation 11
Installation Environment 11
2.3 Connecting the ICE 12
Removing the Target Box Main Cover 12
Removing the SH-2 Board 14
ICE Connection 14
Installing the Main Cover of the Target Box 16
ICE Environment Settings 17
2.4 Connecting the EVA Board 18
Removing the Main Unit’s Cover on the Target Box 18
Removing the SH-2 Board 18
Connecting the EVA Board 19
2.5 Connecting the PAD Cable 21
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
