SEEIT TL866II+ Manuel utilisateur

TL866II+

Universal Programmer with ZIF40 socket and SPI connector

EPROMs / EEPROMs / I2C EEPROMs / FLASHs / SPI FLASHs / Microcontrollers / Logic IC test

User manual (v1.20)

English:

SEEIT is a registered trademark.

SEEIT can be held responsible for no account for damages of whatever nature being able to result from the use of programmer. All

rights reserved. Any reproduction, complete or partial, whatever process it is, of the software, the time switch or the documentation is

illicit, (law n°92-597 of 1st July 1992 modified by the law n°2014-315 of 11 March 2014, article 6). This illicit reproduction, whatever

it is, would constitute an imitation punished by the article L335-2 of the French intellectual property code.

Recycling of electronic products:

That equipment and its accessories shall be subject to a separate collection and correct disposal. This product has been made in

agreement with the standard RoHS to regulate the use of lead in electronic devices. When this product will be obsolete, please, do not

throw it to the household waste. According to the standard DEEE, Please, throw it in a collecting point, at a waste reception centre.

He can also be head back to the supplier for the purchasing of a similar size and functions product. Please, do not throw the worn pile

to the household waste.

Introduction:

The TL866II+ is an universal programmer which supports more than 13.000 components. Its device list contains all the manufacturers

of FLASHs memories who use SPI serial acces mode, EPROMs and FLASHs EPROMs which use parallel acces mode (VPP from

3,3V to 21V), standard microcontrollers manufacturers (Atmel, Intel, Microchip, NXP, Philips, SST, Syncmos et Winbond),

PLD/GAL from Lattice, as well as SRAM/DRAM test. Its program components are the fastest than others programmers because it

supports Fast SPI algorithm mode. Thanks to its USB port, this programmer does not require any external power supply. It is also

protected against shorts and overvoltage. It is possible to program the components on it ZIF40 socket or through it HE10 connector

and with the ICSP cable provided. This programmer is very practical to use with a laptop computer at the office, on a business trip, or

for automotive application. Support for Windows XP / VISTA / 7 / 8 / 10 (32 and 64 bits).

Hardware & Electrical specifications:

Dimensions board : 100 x 60 x 25mm, Weight : 95g

Dimensions package : 188 x 115 x 34mm, Weight : 250g

Power supply on USB port.

Interface : connect to laptop or PC throught USB port (USB 1.1, 2.0 or higher).

Product contents:

Programmer with zif 40 socket.

ICSP cable with 6 wires.

USB cable type A-B.

Software on CD-ROM.

User manual in English.

Chip supporting range:

All kinds 26 27 28 29 37 39 49 50 Parallel ROM, EPROM, EEPROM:

High-speed and wide-support. It can support TSOP32 TSOP40 TSOP48 chip to 64MBits and the programming speed is 5-10 times as

fast as the similar.

24 25 35 45 85 93 95 Series EEPROM:

It can widely support series chips and the 8-16 PIN 25 series chips can be supported to 64MBits capacity.

Hundreds of the 51 series microcontroller:

AVR microcontroller:

Including ATMEGA series, ATtiny series, AT90XXX series microcontroller. AVR microcontroller can complete a one-to-one soft

encryption by RC calibrating bytes. It can support high-speed parallel programming and at the same time all AVR ATMEGAxxx

chips can be supported SPI series download programming by using ICSP interface. TQFP64, TQFP100PIN AMEGAxxx chips can be

supported.

Microchip PIC10 PIC12 PIC16 PIC18 Series microcontrollers:

As for PIC series chips, it can support more than 300 models and more than 900 types of packages. It is one of the most

comprehensive programmers of supporting PIC chips. For all kinds of PIC chips, it can program with optimization and high speed

strictly according to the manufacturer manual. For the majority of chips, it can support ISCP in-circuit programming and at the same

time it can program by using programming socket.

GAL programmable logic device programming:

It can support the common PLD device.

SRAM Test:

It can support common 24 61 62 DS12 series SRAM test, respectively data line testing, the address line testing, memory cell

incremental testing and unit testing.

Superb performance in 54/74F/LS/HC CMOS4000 series IC comprehensive function test:

This is the first development programmer that can test common logic IC. This test can locate the logic gate errors and get any possible

input combinations of IC.

Performance of this programmer:

Well-designed cheap professional programmer, Production of high-density SMD technology, a unified user interface, easy to

use, fully functional, reliable program running of application software, ultra-small code -runs faster, supports bilingual(English and

Chinese), it can automatically identify the operating system to install and run under WIN 2000/WIN XP/VISTA/WIN78/10

(32BIit/64Bit).

The great parts of other development programmers are not comparable to its functions that is not easy to reach.

This programmer has Built-in MCU with high-performance and high-capacity USB interface at the communication speed of

12Mbps being in line with ( For each chip) well-designed programming algorithm and USB high-speed communications. It may be

one of the fastest integrated development programmers, the speed has been met the needs of small-quantity efficient production.

Compared to similar products, some chips' programming speed is several times faster, even more than 10 times. For 4Mbits

parallel FLASH ROM, the upgrade programmer (Version 3.01 or above) takes only about 35 seconds to finish programming (the total

time of erase, write, verify). It only takes about 32 +79 seconds to read and write a 32MB TE28F320. In most cases, the parallel flash

chip can be programmed at the same time it can be verified. The programming will be immediately stopped if there is an error. It only

takes about 12 sec (read) +18 sec (write) to read and write an 8 Mbits of serial 25P80. It only takes about 98 sec +160 sec to read and

write a chip of 64MB capacity. It supports common 8-PIN and 16-PIN 25 series chip with large capacity.

Note: 16MB or larger capacity flash chip cannot be programmed by general programmers because of programming

speed, while the TL866II+ programmer can widely support 64MB Serial and parallel series of chips to 48PIN. It provides with

the remarkable quality that is distinct from other common programmer.

Support a wide range of chips. At present, it can actually program more than 13000 chips. More chips will be supported in

the process of the future upgrade.

Unique ultra-low power. The whole programmer is equipped with the ultra-low power chips and it is furnished with

electricity via USB Interface. It is the first comprehensive programmer to program all the chips without an external power supply.

Their own power consumption is less than 20mA (it is 7mA when the programmer is not programming, LED power indicator use

largest electricity, 5mA each one) and Programming power loss rate is less than 20% so that the programmer can supply the high

VCC VPP programming electric current. Programmable chip can be provided with enough programming power (the largest

programming power output is 2 watts that is impossible for a chip to use 2 watts of programming power). And you hardly feel the heat

of the programmer after such long continuous work.

Easily portable performance. This is one of the smallest products in the world and the dimensions are 10CM*6CM*2.5CM

(it is as small as a driving license). In addition, you don't need to carry with an external power supply because of its ultra-low power

that makes it more portable.

Programmable programming power supply: VPP and VCC programming voltages are independently program-controlled:

programmable VCC is from 3.3V to 6.5V; VPP is from 3.3V to 21V. The fluctuation of power supply is minor because of the multi-

stage LC filter.

Best over-voltage, over-current protection: VCC, VPP power supply of the Programmer is furnished with the independent

Grade 3 over-current protection and the protection of automatically cutting off power supply. Each pin of 40-pin programming socket

has VPP over-voltage protection. It can effectively prevent from putting a chip in the wrong place or short circuit due to other reason.

In this programming case, it can also stop VPP high voltage from coming back to the internal of the programmer and damaging the

device. Really make sure that the programmer will not be damaged when there is any worst-case short circuit. At the same time, the

programmed chip can be efficiently protected.

This programmer will cut off the programming power supply VPP and VCC within 100us and send the message to the

application program when there is short circuit. The programmer and PC won't be reset when there is short circuit because of the

multilevel over-current protection.

40PIN universal pin: It is the most versatile pin among 40PIN quasi-universal pins. You don't need to move or turn around

the chip when programming, just congruously put the chip forward and the handle direction of the programmer is the PIN1 place. Its

design accords with the common operating habit of user.

This programmer is equipped with upgrading Function of the built-in hardware firmware program that can make sure your

programmer's firmware flash and application software can be timely updated. You can complete the upgrade by downloading the

upgrading program through the manufacturer's website.

Second development function of chip serial number. This programmer has a variety of automatic numbering functions that

are used commonly. You can get any serial number through DLL Dynamic Link Libraries by using the custom algorithm. In mass

production, the function enables each chip to produce only one identifying information that can be encrypted by the custom algorithm.

So you can effectively protect your rights as a customer.

This TL866II+ programmer can program through the 40-PIN universal socket and is provided with an ICSP serial

programming port. For some in-circuit serial programmable chips, you can program MCU by choosing ICSP port. You can get the

clear instruction diagram in the programming software for the ICSP port wiring method. That is to say, you can directly program and

update the chip soldered on the board.

Note: Now ICSP can in-circuit serial program ATMEL89S51, ATMEL89S52, AT45DBxxx, a whole series of AVR

ATMEGAxxx, MICROCHIP PIC10Fxxx 12Fxxx 16Fxxx 18Fxxx, as well as a full serial of SYNCMOS SM59Dxx SM59Rxx. The

variety of microcontroller that can be supported in-circuit programming will be continually increased in the future. Six ICSP wires of

this programmer, except a ground wire, other wires led full functional I2C, SPI and UART serial main wire, be suitable for all kinds

of serial communication. In addition, each wire can supply VCC, VPP or GND with high current.

Superb 54/74F/LS/HC CMOS4000 series IC functional tests: This is the first development programmer to test the common

logic integrated circuit and this test can be located the errors of logic gate circuit, as well as test any possible input combinations of

integrated circuit.

Programmer self-testing function: This programmer can test itself on each pin of VPP, VCC, GND and I/O information, at

the same time it can run an inside short-circuit test on VPP, VCC current.

AVR microcontroller one-to-one soft encryption: AVR microcontroller has an RC Calibration (calibrate bytes). Only one of

dozens of chips may have the same bytes value and it cannot be modified. Microcontroller software can read this value and determine

whether the code is used by other chips. Through custom encryption algorithm, it can stop those who decrypt chips with ulterior

motives from directly using. The encryption algorithm is so complex that it is not easy to decrypt. But, about "encryption", there is a

problem for developers - each chip is different - it is impossible to manually calculate one by one and respectively compile source

code if the algorithm is complex. This programmer can automatically read into RC bytes before programming. The developer can get

the bytes value of the chip in the DLL dynamic function and then automatically calculate the encrypted data according to the request

and put it in the memory, efficiently completing mass production. (A detailed encrypted instance of the ATMEGA8 in the installation

package is available for reference)

Unified and convenient user interface: The user interface is well-designed and is in complete accord with the operating habit

of the Windows series of software. Built-in binary editer is comparable to pure professional editing software. You can directly read,

write and modify the files such as BIN format, HEX format, JED format and so on. In addition, it has the complete and practical

project mode that makes the mass production more convenient and safer.

User interface:

Run the program, then the interface is shown as below:

A. Main menu: all operation command of the application software can be found and performed.

B. Toolbar: provide the normal command such as Open, Save, Read, Blank check, Erase, Verify and so on.

C. The chip select shortcut buttons.

D. ID Information Bar: the present chip ID can be shown here

E. data buffer : hexadecimal data you need to program can be shown in the form of 8 bits or 16 bits according to the chip type.

F. Programming options

G. Show present specified address when editing data buffer.

H. Communication status indicator: If there is a USB device, display firmware version number. Conversely, display “No Device”.

I. IC Configuration Information: display the configuration information of the present programmed chip (here different chip has

different information)

J. data buffer: display the ASCII data of the present chip

K. Buffer select button: select the present buffer, more than one buttons will be displayed if the chip has multiple buffers.

L. Basic Information Bar: show the present programmed chip information, showing project information in the project mode.

M. Programming port select button: ICSP button will become gray and invalid when the ICSP port programming is not available.

Quick start guide:

I/ Be ready for the hardware:

Please make sure properly installed the application software and USB driver of the universal programmer before connecting the USB

communication line. At this time, the red power supply indicator shows proper connection (lights up) and the yellow power supply

indicator goes out waiting for programming. (If the yellow power supply indicator flashes at all times, it indicates that the USB driver

installation is wrong or there is no installation of the USB programmer device driver). You can continue to do the next one if the

programmer application software displays the firmware version number in the lower right.

Chip Place Way : PIN1 of the within-40-pins chips should be placed near the ZIF socket handle, just as illustrated:

II/ Select the programmed chip:

Click “Select IC” to select the present chip model you need to program, as below:

Please note: if some type of packages are not listed in the menu or the present chips are non-DIP packages, you can program by

checking the IC product instruction and directly connecting the one-to-one pin.

III/ Load the buffers data:

Programming operation can be performed only when the present chip data is loaded to the buffers. Click “Open file” and open the

present chip data file and then bring out the dialogue box as below:

1. select the file you want to program

2. Select the load mode: generally, specifying the buffer is okay if there are multiple buffers, others are default.

Load all the data to the specified buffer in the same way.

For Microchip PIC microcontroller, HEX file can be once loaded to all buffers if it is in accord with MICROCHIP IDE environment,

including configuration information.

IV/ Set chip configuration information and lock option:

Please press “CONFIG” button in the Buffer select if you need to protect the chip or do other config operations. And then bring out

the config dialogue box. The config information is different from the chip model. For example, if you select as AT89S8253, the below

dialogue box will be brought out:

Do the next one after setting up the configuration information and protection option

V/ programming set:

In most cases, the Default Settings is ok. You can tick off “Auto Serials No.” if you need to number chip.

The specific method reference: <programming details> - <set IC serials number>

Please note: these options, such as “Erase Before”, “Blank Check”, “Skip 0xFF”, “Check device ID”, can be ticked off according to

your needs. “Verify After”: most of programmers contain the inner verify check, but you’d better perform the “Verify After”

operation in order to make sure the proper programming.

VI/ Program: click “Read” button to bring out the dialog box, as show below:

A. select programming buffer, default as all buffers

B. Present operating state prompt area

C. Present chip model

D. Programming operation information: you can see the programming time of every step. Units: MS

E. progress bar

Prompt: the above-mentioned operation is indispensable to programming a chip. The operations are different from the chip model.

File menu :

File menu items are as follows:

◆Open file

Load the hexadecimal file or binary file to the specified buffer, GAL chip should be loaded JED format file.

◆Save file

Save the present buffer as the HEX file of hexadecimal format or BIN file of binary format. Save as JED format file when

programming GAD chip.

Note: MICROCHIP MCU can be loaded the HEX file generated by MICROCHIP IDE development environment to all buffers and all

the buffers can be saved to HEX file. At the same time it is fully compatible with MICROCHIP IDE development environment.

◆Copy, Paste, Block Save As, Define Block, Fill Block, Clear current buffer, Clear all buffer

You can use shortcut keys or right-click menu to realize these menu functions.

See the detailed functions of editing file -> “Edit Buffer”.

◆Find, Find Next, address, Goto

You can use shortcut keys or right-click menu to realize these menu functions.

See the detailed functions of editing file -> “Edit Buffer”.

◆Exit

Exit TL866II+ programming application program

Select IC menu:

Directly select the chip you want to program according to the IC type that is easy and convenient to operate.

Note: For the IC with same model but different package, if all of the packages (no including DIP package) cannot be listed, you can

directly connect the corresponding pins to program by referring to the IC product manual.

Project menu:

In order to make the chip programming process more reliable, the project file needs to be set up. This file has the current buffer data

and working environment settings, including the current device information, all Options settings and related settings of automatic

numbering. It is convenient to use for daily mass production. The password-protected project can be set, that can protect the security

of the product program to some extent.

Project menu items are as follows:

Save project:

Select [Project] - [Save Project] to set up a project after setting parameters of the chip in the application program. The project

information can be shown. Click [Save Project], input the project name and then click OK. The following dialog box will appear:

1. The password can be emptied, that means the password-protected project is not set.

2. The password must be inputted if the project is set as protected mode. The related data of the project cannot be modified after

setting protected mode. In addition, partial functions of programmer are not allowed to use.

Open Project:

Open an current project, select [Project] - [Open Project], select the project name in the window and click OK. If the project is

password-protected, the following dialog box will pop up. (the project can be directly opened if no password)

Save Project As:

Save the current project as another project name. Refer to [Save project].

Close project:

Close the current project. Switch to the normal programming mode and clear the current buffer data.

Project Attrib:

Select [Project] - [Project Attrib], project attribute dialog box pop up.

The Project attribute dialog box can change the project description and project protection mode. The project password needs to be

inputted when saving.

Modify password:

Re-set the project password

Prompt：

An exact description of the project can distinguish from a large number of projects. The project mode is suitable for mass production.

The project file has been encrypted. Proper protection of the project password can stop from copying. It can protect data to some

extent.

The project file includes 32-bit CRC check information when saving or opening. It can avoid damage of the file or other uncertainties

Device menu:

The menu functions are for the chip programming operation. Device menu items are as follows:

Read...: View: <detailed description> -<Read the chip>

Read ID: simply read the chip ID and display information in the ID display area.

Verify: View: <detailed description> -<Check chip>

Program: View: <detailed description> -<Program>

Erase: View: <detailed description> -<Chip Erase>

Blank Check: View: <detailed description> -<Blank check>

Serials Number: View: <detailed description> -<Serials Number>

Testing: View: <detailed description> -<Testing>

Tools menu:

The menu functions are for the chip programming operation. Tools menu items are as follows:

Calculator:

This is a calculator that comes with Windows and the scientific model calculation is very convenient for a variety of formats.

Programmer Self-Check:

Self-test on the programmer hardware

Click to pop up the following dialog box:

Note: Please remove the IC in the 40-PIN socket and ICSP cable before programmer begins to self-check. The IC may be damaged if

no removing. Because when self-checking, programmer will test by applying VPP, VCC and GND to all pins and will perform an

inside short-circuit overcurrent test (at the same time apply VPP, VCC and GND to the same pin). The testing information will be

shown in the dialog box.

Firmware FLASH refresh:

Refresh and upgrade the firmware program

After you upgrade the application, if there is an upgrading need, the application will prompt to refresh the firmware; otherwise his

refresh function is disabled. Click <Refresh firmware > to pop up the following dialog box:

Refresh Note: Please make sure the reliable performance of your PC and the uninterrupted electricity supply to your PC. At the same

time, please close other application programs. The programming firmware program may be damaged if there is a computer crash or

power failure in the process of upgrade. Click <Cancel> to exit upgrade.

Close all other programs, and ensure reliable computer power!

Click <Refresh> to begin, the refresh total time is about 30 seconds. Click <Cancel> to exit refresh.

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur