Securam SafeLogic Basic Manuel utilisateur

Securikey Limited, PO Box 18, Aldershot, Hampshire GU12 4SL. Telephone: 01252 311888/9 Facsimile: 01252 343950

Email: [email protected] http://www.securikey.co.uk

SafeLogic Basic

Operating Instructions (User)

Unlock and Code Change Functions.

Battery Installation.

Initially the keypad may not have a battery fitted.

To insert/replace the battery, release the latch of the battery

compartment by pulling lever downward, See Fig. 2.

Pull out the battery compartment at the bottom of the Entry Pad, See Fig. 3.

Take out the battery and replace with a new 9V alkaline battery (Duracell and Energizer brands

are recommended). Insert the battery into the compartment with the positive and negative

terminals orientated correctly. See Fig.4.

Put the battery compartment back into the entry pad. Push up the latch of the battery

compartment until it snaps closed. See Fig. 1.

How to open the lock.

The lock will be set on a default code of 1 2 3 4 5 6

Press the default code 1 2 3 4 5 6 in sequence (LED flickers and unit sounds Bi with each

number)

On final number lock gives a double LED flicker and sounds Bi Bi.

Wrong entry time penalty.

Entry of four consecutive invalid codes results in a 5-minute penalty time period.The unit beeps at 5

second intervals indicating that it is still in the penalty time period.

While the system is in penalty time, the Entry Pad buttons remain unresponsive.

Pressing buttons during penalty will not restart or lengthen the penalty time period. It will

continue to count through the 5 minute penalty time period.

While the system is in penalty time, removal of the batteries will interrupt the penalty time

countdown. Upon reinstallation of the batteries, the Entry Pad continues to count down until the

5 minute penalty time period expires.

Securikey Limited, PO Box 18, Aldershot, Hampshire GU12 4SL. Telephone: 01252 311888/9 Facsimile: 01252 343950

Email: [email protected] http://www.securikey.co.uk

How to change your code.

Enter “0” six times. Two beeps will sound on the final “0”indicating the entry is valid and the

system is awaiting the code change.

Enter the existing six (6) digit code. Two beeps will sound on the final digit indicating the entry

is valid.

Enter the new six (6) digit code. One final beep will sound, indicating the entry is valid.

Re-enter the new six (6) digit code. One final beep will sound indicating the code changing

process is successful.

Notes:

If Three Beeps sound, the code change process has been unsuccessful and the existing code

is still valid. Repeat code change steps above.

The system will not allow the User Code to be set to six zeros.

Verify the new code at least 3 times to ensure the code has been programmed correctly.

The system will revert to standby status if there is no key press within 10 seconds. Standby

status is indicated by two short beeps.

Automatic Re-lock.

The safe lock automatically relocks after 6 seconds of being opened by a valid code.

Standby Status.

In order to conserve battery power, the system will revert to standby status if there is no key press

within 10 seconds. Standby status is indicated by two short beeps.

Low Battery Alert.

Repeated beeping (8 beeps) during an unlock operation indicates the battery is low (5.2±0.2V)

and needs immediate replacement. We recommend annual replacement of the 9-Volt standard

alkaline battery (Duracell or Energizer).

User Programming.

Always perform operations with the safe unlocked and the safe door open. Before closing the

door, make sure all the program changes are correct.

Default Code

1 2 3 4 5 6

Your New Code

Table des matières

Autres manuels Securam Verrouillage

Securam

Securam FPC-0601A-D22 Manuel utilisateur

Securam

Securam ProLogic L01 Manuel utilisateur

Securam

Securam SafeLogic Xtreme Manuel du propriétaire

Securam

Securam ProLogic L22 Manuel utilisateur

Securam

Securam ScanLogic B22 Manuel utilisateur

Securam

Securam V8 Manuel technique

Securam

Securam ScanLogic Optical Manuel d'installation

Securam

Securam MANAGER Series Manuel utilisateur

Securam

Securam ProLogic L66 Manuel utilisateur

Securam

Securam SH-TB01 Manuel utilisateur

Securam

Securam SafeLogic Xtreme Manuel utilisateur

Securam

Securam SCANLOGIC FPC-1808-II-MB Manuel utilisateur

Securam

Securam SafeLogic Basic Manuel utilisateur

Securam

Securam SafeLogic Basic Series Manuel utilisateur

Securam

Securam SafeLogic TopLit Series Manuel utilisateur

Securam

Securam SafeLogic C10 D-Drive Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Securam

Securam ProLogic L22 Manuel utilisateur

Securam

Securam ScanLogic D66 Manuel utilisateur

Securam

Securam SafeLogic Basic Manuel utilisateur

Securam

Securam ProLogic B01 Manuel utilisateur

Securam

Securam ProLogic B22 Manuel utilisateur

Securam

Securam SH-WB01 Manuel utilisateur

Securam

Securam D Series Manuel utilisateur

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur

Metra Electronics

Metra Electronics Door Access Terminal Combo Manuel utilisateur