Securam SafeLogic Basic Manuel utilisateur

SafeLogic Basic

Operating Instructions (Manager)

Open the safe lock.

Change Manager Code.

Add or delete the User Code.

Enable or disable the User Code.

In some instances, the Manager Code and associated Operating Instructions

are not issued to the End User. In this case, simply remove this insert from the

Operating Instruction.

Manufacturer default codes

The Manager Code is set to 1-1-1-1-1-1

The User Code is set to 1-2-3-4-5-6

MANAGER PROGRAMMING

Always perform operations with the safe lock system unlock and the safe door open. Before

closing the door, make sure all of the program changes are correct. 

The system will not allow the User Code to be set to six zeros.

To Change the Manager Code

Enter “0” six times. Two beeps will sound on the final “0” indicating the entry is valid and the

system is awaiting the code change.

Enter the existing six (6) digit code. Two beeps will sound on the final digit indicating the entry

is valid.

Enter the new six (6) digit code. One final beep will sound, indicating the entry is valid.

Re-enter the new six (6) digit code. One final beep will sound indicating the code changing

process is successful.

Notes:

If Three Beeps sound, the code change process has been unsuccessful and the existing code

is still valid. Repeat code change steps above.

Verify the new code at least 3 times to ensure the code has been programmed correctly.

The system will revert to standby status if there is no key press within 10 seconds. Standby

status is indicated by two short beeps.

To Add the User Code

The lock will be set on a default code of 1 2 3 4 5 6

If the user code has been deleted, follow these steps to add the User Code:

Enter the Manager Code and hold down the last digit of this code. One beep will sound

indicating a valid code entry. Continue to hold down this digit until two additional beeps sound.

This indicates that the system is now in program mode. 

Press button “1”. One beep will sound, indicating that the system is ready to receive the new

User Code 

Enter a six digit code. Two beeps will sound. 

Repeat the six digit code. One beep will sound, indicating that the six digit codes entered were

the same and the addition of the User Code was successful. 

If 3 beeps sound, the programming attempt was unsuccessful. Repeat the steps above. 

Notes:

If Three Beeps sound, the code change process has been unsuccessful and the existing code

is still valid. Repeat code change steps above.

Verify the new code at least 3 times to ensure the code has been programmed correctly.

The system will revert to standby status if there is no key press within 10 seconds. Standby

status is indicated by two short beeps.

To Disable the User Code

Enter the Manager Code and hold down the last digit of this code. One beep will sound

indicating a valid code entry. Continue to hold down this digit until two additional beeps sound.

This indicates that the system is now in program mode. 

Press button “2”. One beep will sound, indicating that the system has disabled the User Code.

To Enable the User Code

Enter the Manager Code and hold down the last digit of this code. One beep will sound

indicating a valid code entry. Continue to hold down this digit until two additional beeps sound.

This indicates that the system is now in program mode. 

Press button “1”. One beep will sound, indicating that the system has enabled the User Code 

To Delete the User Code

Enter the Manager Code and hold down the last digit of this code. One beep will sound

indicating a valid code entry. Continue to hold down this digit until two additional beeps sound.

This indicates that the system is now in program mode. 

Press button “3”. One beep will sound, indicating that the system has deleted the existing User

Code

Now follow the “To Add the User Code “instruction if you wish to program a user

Default User Code

1 2 3 4 5 6

Default Manager Code

1 1 1 1 1 1

Your User Code

Your Manager code

Table des matières

Autres manuels Securam Verrouillage

Securam

Securam SafeLogic Xtreme Manuel utilisateur

Securam

Securam SH-WB01 Manuel utilisateur

Securam

Securam SH-TB01 Manuel utilisateur

Securam

Securam ScanLogic B22 Manuel utilisateur

Securam

Securam ScanLogic D66 Manuel utilisateur

Securam

Securam D Series Manuel utilisateur

Securam

Securam ScanLogic Optical Manuel d'installation

Securam

Securam SCANLOGIC FPC-1808-II-MB Manuel utilisateur

Securam

Securam ProLogic B01 Manuel utilisateur

Securam

Securam SafeLogic Xtreme Manuel du propriétaire

Securam

Securam ProLogic L02-C Manuel utilisateur

Securam

Securam EM-1701A-R Manuel utilisateur

Securam

Securam ProLogic L66 Manuel utilisateur

Securam

Securam ProLogic B22 Manuel utilisateur

Securam

Securam ProLogic L01 Manuel utilisateur

Securam

Securam FPC-0601A-D22 Manuel utilisateur

Securam

Securam ProLogic L22 Manuel utilisateur

Securam

Securam ProLogic L22 Manuel utilisateur

Securam

Securam SafeLogic Basic Manuel utilisateur

Securam

Securam SafeLogic TopLit Series Manuel utilisateur

Securam

Securam SafeLogic Basic Series Manuel utilisateur

Securam

Securam V8 Manuel technique

Securam

Securam SafeLogic Basic Manuel utilisateur

Securam

Securam SafeLogic C10 D-Drive Manuel utilisateur

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur

Metra Electronics

Metra Electronics Door Access Terminal Combo Manuel utilisateur