Q
Introduction
TheFl uses
thelatest32
bit ARMTTDMI-S
microprocessor
and
DSp technology
to operate
door
strikesandsecuritysystems
thatrequireamomentary(timed) or latchingdry contact
closure.
All programmingis donethroughainfraredremotecontrol keypad,codes
andoperating
parameters
arestored
within theflashmemoryandcannot beiost iue to power failure.
TheFl has 1codesupervisor,
and0-4_fingerprint
supervisors
canstore120
fingerprints
maximum, andeveryuser
with I to 4 fingerprint, "u"h, 3-digit ID code,to-oigi, programmable
outputdata,
which couldbeoutputwith wiegand 26 oi wieganc 34.Theunit hasone
relaywith
2Amp contacts.
l. Specifications
l.l Programmable
Functions
Relay latchingor momentary
Relay activateindependently
or together
Change
Codes
I code
supervisor
2 registering
master
fingerprint,
2 deregister
master
fingerprint
,29 to r20 users
Door open
detection
Outputformat
1.2
Programmable Timers
Doorrelay
time00-99
seconds
Alarm time00-99
minutes
1.3
Wiring Connections
Wiegandoutput
Electric
lock
ExternalPushSwitch
Magnetic
Contacts
Alarm
1.4
Keypad
Infrared remotecontrolkeypad
IMPORTANT INFORAMTION
IH::t" no userserviceable
parts contained
within theFl Fingerkey & Fingerprints
If holes
are
to bedrilledbefore
mounting
onto
awall, check
forhidden
cablesanporpipes
before
drilling. use safety
goggles
whendrilling orhammering
in cuut"ctips.
Every effort hasbeen
made
to provide accurate
information, howeverslight variationscanoccur.
we alsoreserve
theright to makechanges
for productimprovementat anytime.
NOTE
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO
INSTALL THE Fl. ;iir
