Sealey SCR90 Manuel utilisateur

MECHANIC’S DETAILING UTILITY SEAT

MODEL NO: SCR90

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this seat.

9Locate seat in a suitable working area.

WARNING! Use seat on level and solid ground, preferably concrete.

9Keep the seat clean and tidy in accordance with good workshop practice.

8DO NOT use the seat for any purpose other than that for which it is designed.

8DO NOT stand on the seat.

8DO NOT use the seat outdoors.

8DO NOT get the seat wet or use in damp or wet locations or areas where there is condensation.

8DO NOT clean the seat with any solvents which may damage the paint surface or the protective coating on the padded seat base.

8DO NOT use if damaged.

2. INTRODUCTION

Extra thick cushioned padding for added comfort when seated. Suitable for use in Bodyshop and Detailing environments as well as general

garage use. Easy-rolling Ø100mm rubber castors with ball-bearing swivel. Cup/bottle holders and storage trays for tools and components.

3. SPECIFICATION

Model No....................................................................SCR90

Overall Size (W x D x H).........................680 x 460 x 410mm

4. CONTENTS

1 Seat

2 Frame

3,4,6,7 Trays

5 Nuts

8 Wheels

5. ASSEMBLY

5.1. Place castors through frame (2) and secure with nut

and washer (5).

5.2. Fit tray (7) into base of frame (2).

5.3. Fit trays (3 & 4).

5.4. Slide tray (6) under seat.

6. MAINTENANCE

6.1. Before each use, inspect the overall condition of the

unit for broken, cracked or bent parts that may

 a󰀨ecttheproperoperation.

6.2. Regularly check the tightness of all fixings before use.

6.3. Smear the castor bearings with a thin film of silicone

grease quartlerly.

6.4. Ensure the castor wheels are able to rotate and swivel freely. Replace if necessary.

6.5. Clean the seat cushion, trays and frames with a moist cloth and mild detergent. DO NOT use solvents to clean the unit.

Refer to

instructions

SCR90 Issue 1 19/04/22

Original Language Version

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR

01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to

a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely

unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids

according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior

notice.

Important: No Liability is accepted for incorrect use of this product.

Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

SCR90 Issue 1 19/04/22

Original Language Version

Parts support is available for this product. Please email sales@sealey.co.uk or telephone 01284 757500

Table des matières

Autres manuels Sealey Rangement des outils

Sealey

Sealey AP3508TB Manuel utilisateur

Sealey

Sealey APWMW01 Manuel utilisateur

Sealey

Sealey SC01 Manuel utilisateur

Sealey

Sealey AP5520SS Manuel utilisateur

Sealey

Sealey PTB141507 Manuel utilisateur

Sealey

Sealey TS01 Manuel utilisateur

Sealey

Sealey AP26059TBRG Manuel utilisateur

Sealey

Sealey AP760MHV Manuel utilisateur

Sealey

Sealey AP4206BE.V2 Manuel utilisateur

Sealey

Sealey AP2020 Manuel utilisateur

Sealey

Sealey SCR92 Manuel utilisateur

Sealey

Sealey PTB91508 Manuel utilisateur

Sealey

Sealey AP2020BB Manuel utilisateur

Sealey

Sealey AP28102 Manuel utilisateur

Sealey

Sealey AP2405 Manuel utilisateur

Sealey

Sealey AP6310BE Manuel utilisateur

Sealey

Sealey AP3020 Manuel utilisateur

Sealey

Sealey AP2200BB Series Manuel utilisateur

Sealey

Sealey AP1205 Manuel utilisateur

Sealey

Sealey AP4707S Manuel utilisateur

Sealey

Sealey AP12160 Manuel utilisateur

Sealey

Sealey AP26479TBRG Manuel utilisateur

Sealey

Sealey CX1042D Manuel utilisateur

Sealey

Sealey API Series Manuel utilisateur

Manuels Rangement des outils populaires d'autres marques

Ryobi

Ryobi RWB03 Manuel utilisateur

Husky

Husky H27CH5TR4BGK Manuel utilisateur

Scheppach

Scheppach ts 2100 Manuel utilisateur

Cornwell Tools

Cornwell Tools CTB360AKBK Manuel utilisateur

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manuel utilisateur

Cassese

Cassese CS200 CART Manuel utilisateur

Kendall Howard

Kendall Howard ESDW-9630-1000 Manuel utilisateur

Lista

Lista Align Instructions de montage

Workzone

Workzone 99609 Manuel utilisateur

Stanley

Stanley STST83800-1 Manuel utilisateur

Homak

Homak PROFESSIONAL Series Manuel du système

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manuel utilisateur

Husky

Husky H5CH2R Manuel utilisateur

BGS technic

BGS technic 4107 Manuel utilisateur

Clarke

Clarke CWB1250 Manuel utilisateur

Ryobi

Ryobi RWB02 Manuel utilisateur

Husky

Husky H52CH6HDV3WHT Manuel utilisateur

General International

General International Excalibur 40-100 Manuel de la liste des pièces