Sealey APMS21 Manuel utilisateur
2108MM HEAVY-DUTY MODULAR FULL
HEIGHT FLOOR CABINET
MODEL NO: APMS21
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
I
MP
PO
R
RTA
TA
NT:
PLEA
S
E READ THE
S
E IN
S
TRU
C
TI
O
N
S
C
AREFULLY. N
O
TE THE
S
AFE
O
PERATI
O
NAL RE
Q
UIREMENT
S
, WARNIN
GS
&
C
AUTI
O
N
S
. U
S
E
TH
HE
P
PR
O
ODU
C
T
CO
RRE
C
TLY AND WITH
C
ARE F
O
R THE P
U
RP
OS
E F
O
R WHI
C
H IT I
S
INTENDED. FAIL
U
RE T
O
D
O
SO
MAY
C
A
US
E DAMA
G
E AND
/O
R
PE
ER
S
SON
N
AL IN
JU
RY AND WILL INVALIDATE THE WARRANTY. KEEP TH
ESE
IN
STR
UCT
ION
S S
AFE
FO
R F
U
T
U
RE
USE
.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
storage system.
Locate in a suitable work area.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING! Use storage on level and solid ground, preferably concrete.
Keep the storage system clean and tidy in accordance with good workshop practice.
Keep children and unauthorised persons away from the work area.
Be aware when assembling of sharp edges. Wear gloves.
During assembly of the cabinet you may require the assistance of another person.
DO NOT use the storage system for any purpose other than that for which it is designed.
DO NOT use the storage system outdoors.
DO NOT place the storage system in a damp or wet location or an area where there is condensation.
DO NOT clean the storage system with any solvents which may damage the surfaces or the protective coating.
DO NOT move the storage system when there are items placed inside.
DO NOT step on the shelves.
DO NOT overload the storage system.
2. INTRODUCTION
Use as part of a complete professional garage storage system or as an individual storage unit. All steel construction with a graphite powder
coat finish. Heavy-duty full height single door cabinet. Three adjustable shelves. Four level-adjusting feet. Added security provided by
cylinder lock, supplied with two keys. Requires some self-assembly. Supplied flat-packed for ease of transportation.
3. SPECIFICATION
Model No: ................................................................ APMS21
Overall Size (W x D x H): ......................610 x 610 x 2108mm
4. CONTENTS
APMS21 Issue 1 30/07/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
ITEM DESCRIPTION QTY
1Top panel 1
2Back panel 1
3M6 x 12 Cross head screw 40
4Right side panel 1
5Shelf 3
6Shelf support 12
7Bottom panel 1
8Metal foot 4
9Adjustable foot 4
10 Skirting board 1
11 Door 1
12 Lock 1
13 M4 x 8 Cross head screw 2
14 Door handle 1
15 Left side panel 1
fig.1
5. ASSEMBLY
5.1. BOTTOM PANEL ASSEMBLY
5.1.1. Secure the metal feet (fig 2 - 8) to the bottom panel (fig 2 - 7) with M6 x 12 cross head screws (fig 2 - 3).
5.1.2. Locate and thread the adjustable feet (fig 2 - 9) into the bottom panel.
5.2. PANEL ASSEMBLY
5.2.1. Prior to panel assembly lay a soft mat or similar on the floor to protect the paint finish
5.2.2. Attach right side panel (fig 3 - 4) to back panel (fig 3 - 2) by sliding it’s edge into the groove on the side edge of the back panel.
5.2.3. Repeat for left side panel (fig 3 - 15).
5.3. BOTTOM PANEL AND SIDES ASSEMBLY
5.3.1. Locate and align bottom panel assembly fixing holes with the fixing holes in the side and bottom panel assembly (fig 4).
5.3.2. Secure with M6 x 12 cross head screws (fig 4 - 3).
5.4. TOP PANEL TO SIDES ASSEMBLY
5.4.1. Locate and align top panel (fig 5 - 1) with fixing holes in the side panels and secure with M6 x 12 cross head screws (fig 5 - 3).
5.4.2. Secure top panel (fig 5 - 1) to front fixing holes on side panels with M6 x 12 cross head screws (fig 5 - 3).
5.5. FINAL PANEL FIXINGS
5.5.1. With the assistance of another person rotate the cabinet assembly onto it’s side (fig 6).
5.5.2. Secure the remaining fixings of the bottom panel assembly and top panel with M6 x 12 cross head screws (fig 6 - 3).
5.6. ATTACHING THE SHELVES
5.6.1. With the assistance of another person stand the cabinet upright (fig 7).
5.6.2. Insert the shelf supports (fig 7 - 6) into the slots on the back panel and
inner face of the front panel, at the desired heights.
5.6.3. Fit the shelf (fig 7 - 5) onto the appropriate set of shelf supports.
5.6.4.
Press the shelf firmly until locked onto the shelf supports.
5.6.5. The shelves can be adjusted by removing them offthe supports and
repositioning the supports at the new desired height.
5.7. ATTACHING THE DOOR
NOTE: The door (fig 8 - 11) has a pin fitted at the bottom and a spring bolt fitted at the top.
5.7.1. Locate the bottom pin into the hole at the front of the base unit assembly (fig 8).
5.7.2. Pull the top spring pin down and align with the hole in the top panel rail (fig 8).
5.7.3. Release the top spring to allow the bolt to locate into the hole.
5.8. ATTACHING THE DOOR HANDLE
5.8.1. Locate the door handle (fig 9 - 14) to it’s corresponding fixing holes, on the door, and secure with M4 x 8 cross head screws
(fig 9 - 13).
APMS21 Issue 1 30/07/21
Original Language Version
© Jack Sealey Limited
fig.2 fig.3
fig.4 fig.5
fig.6
fig.7
5.9. ATTACHING THE SKIRTING BOARD
5.9.1. Prior to attaching the skirting board level the cabinet by rotating the adjusting feet (fig 2 - 9) to suit.
5.9.2. Attach the skirting board (fig 9 - 10) into position and secure with M6 x 12 cross head screws (fig 9 - 3).
APMS21 Issue 1 30/07/21
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
fig.8 fig.9
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Sealey Stockage
Sealey
Sealey AP6612.V2 Manuel utilisateur
Sealey
Sealey DH02.V2 Manuel utilisateur
Sealey
Sealey GSS2323.V2 Manuel utilisateur
Sealey
Sealey SEGS5 Manuel utilisateur
Sealey
Sealey APMS01 Manuel utilisateur
Sealey
Sealey GSC110385 Manuel utilisateur
Sealey
Sealey AP2200BB Series Manuel utilisateur
Sealey
Sealey DH02.V2 Manuel utilisateur
Sealey
Sealey APMS60 Manuel utilisateur
Sealey
Sealey GSC110385.V3 Manuel utilisateur
Sealey
Sealey SB565 Manuel utilisateur
Sealey
Sealey APSPB.V2 Manuel utilisateur
Sealey
Sealey APMS Series Manuel utilisateur
Sealey
Sealey MCS02 Manuel utilisateur
Sealey
Sealey APMS68 Manuel utilisateur
Sealey
Sealey CCS01 Manuel utilisateur
Sealey
Sealey APSPB.V2 Manuel utilisateur
Sealey
Sealey TPS22 Manuel utilisateur
Sealey
Sealey STR005.V2 Manuel utilisateur
Sealey
Sealey APMS63 Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur