Sealey APMS05.V2 Manuel utilisateur

INSTRUCTIONS FOR

MODULAR FULL HEIGHT FLOOR CABINET 930MM

HEAVY DUTY

MODEL NO: APMS05.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.

9Locate cabinet in a suitable work area.

9Keep the work area clean, uncluttered and ensure there is adequate lighting.

WARNING! Use cabinet on level and solid ground, preferably concrete.

9Keep the cabinet clean and tidy in accordance with good workshop practice.

9Keep children and unauthorised persons away from the work area.

8DO NOT use the cabinet for any purpose other than that for which it is designed.

8DO NOT use the cabinet outdoors.

8DO NOT place the cabinet in a damp or wet location or an area where there is condensation.

8DO NOT clean the cabinet with any solvents which may damage the surfaces or the protective coating.

8888 DO NOT move the cabinet when there are items placed inside.

8888 DO NOT step on the shelves.

8888 DO NOT8overload the cabinet.

2. INTRODUCTION

• Use as part of a complete professional garage storage system or as an individual storage unit.

• All steel construction with a graphite powder coat nish.

• Heavy-duty full height 2 door cabinet.

• 3 Adjustable shelves.

• 4 Level-adjusting feet.

• Added security provided by cylinder lock, supplied with two keys.

• Overall measurements (W x D x H): 930 x 610 x 2110mm.

3. CONTENTS

APMS05.V2 | Issue 1 09/02/17

Original Language Version

Refer to

instructions

No. Description Quantity

1Top panel 1

2Left back panel 1

3M6 x 12 cross head bolt 44

4Right back panel 1

5Right side panel 1

6Shelf 3

7Door handle 2

8 Shelf support 12

9Bottom panel 1

10 Adjustable feet 4

11 Metal feet 4

12 Lock 1

13 Right door 1

14 Skirting board 1

15 M4 x 8 crosshead bolt 4

16 Left door 1

17 Left side panel 1

4. ASSEMBLY

4.1. The initial assembly is easier if carried out with cabinet horizontal. Lay a soft mat or similar on the oor to protect the paint nish.

4.2. Attach the four metal feet to the bottom panel using 16pcs of M6X12mm cross head bolt, g.1.

4.3. Screw four adjustable feet into the bottom panel, g.1.

4.4. Lay down the two back panels on their backs with a soft mat underneath, g.2.

4.5. Attach the right back panel and left back panel by sliding the left back panel’s edge into the groove of the right back panel, g.2.

4.6. Attach the left side panel to the left back panel by sliding the left side panel’s edge into the groove of the left back panel. Repeat the

same procedure to attach the right side panel to the right back panel, g.3.

4.7. Attach the bottom panel to the side panels. Tighten securely with 6pcs of M6X12mm cross head bolt in the front of the side panels,

g.4.

Fig.1

Fig.3

Fig.2

Fig.4

APMS05.V2 | Issue 1 09/02/17

Original Language Version

4.8. Attach the top panel to the side panels with 6pcs of M6X12mm cross head bolt, g.5.

4.9. Fix the front of the top panel and the front of the side panel together using 4pcs of M6X12mm cross head bolt, g.5.

4.10. Tilt the cabinet on to its side and secure the bottom panel to the back panel with 6pcs of M6X12mm cross head bolt, g.6.

4.11. Tighten the top panel and back panels securely with 4pcs of M6X12mm cross head bolt, g.6.

4.12. Stand the cabinet upright. Use two people to complete this task.

4.13. Fit the shelves at the desired heights by lowering the shelf onto the appropriate set of shelf supports. Press the shelf rmly until locked

onto the shelf support, g.7.

4.14. The shelves can be adjusted at any time by lifting them off and repositioning, g.7.

4.15. The doors have a pin at the bottom and a spring bolt at the top. To t the doors, drop the pin into the hole in the front of the base and

then pull the bolt until it locates in the hole in the top rail. Release the bolt to attach the door, g.8.

4.16. Install both door handles with M4x8mm cross head bolts, see g. 9.

4.17. Adjust the four adjustable feet to level the cabinet, see g. 9.

4.18. Install the skirting board with 2pcs of M6X12mm cross head bolt, see g. 9.

Fig.5 Fig.6

Fig.7 Fig.8 Fig.9

APMS05.V2 | Issue 1 09/02/17

Original Language Version

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

Sole UK Distributor, Sealey Group.

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk.

IP32 7AR

www.sealey.co.uk

sales@sealey.co.uk

01284 757500

01284 703534

Web

Fig.10

Environmental Protection

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.

When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

APMS05.V2 | Issue 1 09/02/17

Original Language Version

Table des matières

Autres manuels Sealey Stockage

Sealey

Sealey DG01 Manuel utilisateur

Sealey

Sealey SB565 Manuel utilisateur

Sealey

Sealey FSC07 Manuel utilisateur

Sealey

Sealey APMS50UCS Manuel utilisateur

Sealey

Sealey AP2200BB Series Manuel utilisateur

Sealey

Sealey GSC110385 Manuel utilisateur

Sealey

Sealey GSC110385.V3 Manuel utilisateur

Sealey

Sealey DH02.V2 Manuel utilisateur

Sealey

Sealey APMS21 Manuel utilisateur

Sealey

Sealey AP6601 Manuel utilisateur

Sealey

Sealey GCSC319 Manuel utilisateur

Sealey

Sealey MCS02 Manuel utilisateur

Sealey

Sealey APSPB.V2 Manuel utilisateur

Sealey

Sealey CCS01 Manuel utilisateur

Sealey

Sealey APMS60 Manuel utilisateur

Sealey

Sealey APSPB.V2 Manuel utilisateur

Sealey

Sealey AP6612.V2 Manuel utilisateur

Sealey

Sealey APMS64 Manuel utilisateur

Sealey

Sealey GSS2323.V2 Manuel utilisateur

Sealey

Sealey TPS22 Manuel utilisateur

Sealey

Sealey APMS01 Manuel utilisateur

Sealey

Sealey APMS68 Manuel utilisateur

Sealey

Sealey STR005.V2 Manuel utilisateur

Sealey

Sealey APMS63 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur