Schweitzer Engineering Laboratories SEL-2BFR Manuel utilisateur

SEL-2BFR, -2/BFR

BREAKER FAILURE RELAY AND MONITOR

INSTRUCTION MANUAL

20030207

SCHWEITZER ENGINEERING LABORATORIES

2350 NE HOPKINS COURT

PULLMAN, WA USA 99163-5603

TEL: (509) 332-1890 FAX: (509) 332-7990

The software (firmware), schematic drawings, relay commands, and relay messages are copyright protected by the United States Copyright Law and

International Treaty provisions. ll rights are reserved.

You may not copy, alter, disassemble, or reverse-engineer the software. You may not provide the software to any third party.

ll brand or product names appearing in this document are the trademark or registered trademark of their respective holders.

CSELER TOR, Connectorized, CONSELT NT, Job Done, Schweitzer Engineering Laboratories, , SEL, SELOGIC, and SEL-PROFILE, are registered

trademarks of Schweitzer Engineering Laboratories, Inc.

The English language manual is the only approved SEL manual.



SEL 1990, 1991, 1992, 1994, 1996, 1998, 1999, 2001, 2003 ( ll rights reserved) Printed in US .

This product is covered by U.S. Patent Numbers: 5,157,575 and 5,479,315.

This product is covered by the standard SEL 10-year warranty. For warranty details, visit www.selinc.com or contact your customer service

representative. PM2BFR-01

Date Code 20030207 Manual Change Information i

SEL-2BFR, -2/BFR Instruction Manual

MANUAL CHANGE INFORMATION

The date code at the bottom of each page of this manual reflects the creation or revision date.

Date codes are changed only on pages that have been revised and any following pages affected

by the revisions (i.e., pagination). If significant revisions are made to a section, the date code on

all pages of the section will be changed to reflect the revision date.

Each time revisions are made, both the main table of contents and the affected individual section

table of contents are regenerated and the date code is changed to reflect the revision date.

Changes in this manual to date are summarized below (most recent revisions listed at top).

Revision

Date Summary of Revisions

20030207 Updated Appendix A: Firmware Versions in this Manual.

20010515 Added information on the effect of 50FT pickup on IRIG-B operation in

Section 2: Specifications and Section 5: Applications.

990714 Changed footers on entire manual to reflect SEL-2BFR, -2/BFR.

Added Model Variation Information to Section 1: Introduction.

Incorporated SEL-2BFR-2 Time Delayed Retrip Logic into Section 2:

Specifications.

Modified AND and OR gate numbering in Section 2: Specifications.

Reformatted Settings Sheets at end of Section 5: Event Reporting.

Added Appendix C: SEL-BFR to explain SEL-BFR Relay differences.

990512 Clarified Figure 2.12 in Section 2: Specifications.

Updated Appendix A: Firmware Versions in this Manual.

981019 Incorporated the following addenda into Section 1: Introduction: “ACB

Phase Rotation Option” and “50 Hz Options.”

Incorporated the following addenda into Section 2: Specifications: “New

SEL-200 Series Optical Isolator Logic Input Rating” and “SEL-2BFR/BFR

Instruction Manual Addendum for 1 Amp Version and 50/60 Hz Relays.”

Incorporated the following addendum into Section 6: Installation: “Jumper

Installation Instructions.”

Updated Figures 6.3, 6.4, and 6.5.

970423 2BFR Specifications Addendum - Addition



Date Code 20030207 Table of Contents i

SEL-2BFR, -2/BFR Instruction Manual

SEL-2BFR, -2/BFR INSTRUCTION MANUAL

TABLE OF CONTENTS

SECTION 1: INTRODUCTION

SECTION 2: SPECIFICATIONS

SECTION 3: COMMUNICATIONS

SECTION 4: EVENT REPORTING

SECTION 5: APPLICATIONS

SECTION 6: INSTALLATION

SECTION 7: MAINTENANCE AND TESTING

SECTION 8: APPENDICES

Appendix A: Firmware Versions in This Manual

Appendix B: Internal Diagrams

Appendix C: SEL-BFR Specifications



Date Code 990714 Introduction i

SEL-2BFR, -2/BFR Instruction Manual

TABLE OF CONTENTS

SECTION 1: INTRODUCTION ............................................................1-1

Getting Started ..............................................................................................................................1-1

Overview .......................................................................................................................................1-1

Relay Features .......................................................................................................................1-1

Model Variations ..........................................................................................................................1-2

SEL-BFR ...............................................................................................................................1-2

SEL-2BFR Relay...................................................................................................................1-2

2BFR-2 Relay........................................................................................................................1-2

Conventional Terminal Block ...............................................................................................1-2

Plug-In Connector .................................................................................................................1-3

Phase Rotation.......................................................................................................................1-3

System Frequency .................................................................................................................1-3

General Description ......................................................................................................................1-3

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Schweitzer Engineering Laboratories Relais