Schweitzer Engineering Laboratories SEL-267D Manuel utilisateur

SEL-267D

SEL-167D

PHASE AND GROUND

DIRECTIONAL OVERCURRENT RELAY

WITH RECLOSER AND FAULT LOCATOR

INSTRUCTION MANUAL

SCHWEITZER ENGINEERING LABORATORIES

2350 NE HOPKINS COURT

PULLMAN, WA 99163-5603

TEL: (509) 332-1890 FAX: (509) 332-7990

Customer

P.O.#:

Book Assembled and Checked by

Date Assembled and Checked

The software (firmware , schematic drawings, relay commands, and relay messages are copyright

protected by the United States Copyright Law and International Treaty provisions. All rights are

reserved.

You may not copy, alter, disassemble, or reverse-engineer the software. You may not provide the

software to any third party.

The schematics and parts lists are provided solely for the purpose of product maintenance.

Printed in USA

Standard Product Warranty – Ten Years

EFINITION OF

ERMS

Product:

All items manufactured by SEL that are sold to a customer.

New Product: A product manufactured by SEL that is sold for the first time.

Customer: An end-user of the product.

RODUCT

ARRANTY

All new products sold to customers are warranted against defects in design, materials, and

workmanship for a period of ten (10 years from the date of first retail delivery to a customer. If

it is determined that the new product defect is covered under this warranty, SEL will repair,

replace, or substitute an identical unit at its own discretion to the customer at no charge.

SEL may, at its own discretion, require the customer to ship the unit back to the factory for

diagnosis before making a determination as to whether it is covered by this warranty. In such

event, SEL may, at its own discretion, decide to provide the customer with a substitute unit which

may be sent to the customer either from the SEL factory or from an authorized representative or

distributor from their inventory.

All expenses related to the shipment of defective units back to SEL or the provision of a

substitute unit to the customer are the responsibility of the customer. This expense may include,

but is not limited to, freight, insurance, Customs clearance, and duties. All expenses related to

the shipment of repaired units back to customers (or the provision of a new unit to the customer

will be borne by SEL.

RODUCT

PGRADE

OLICY

From time to time, SEL makes product upgrades to add to or enhance the performance of the

products. Customers of a particular product being issued an upgrade will be notified either by

SEL directly or through its authorized representatives or distributors.

Customers who have purchased an annual upgrade policy will receive all upgrades during the

calendar year free of charge. Customers who did not purchase the annual upgrade policy may

purchase each unit upgrade individually. The annual upgrade policy can be purchased at any

time. Regardless of whether the upgrade policy is purchased, SEL will make reasonable efforts

to notify all customesrs of all available upgrades.

SCHWEITZER ENGINEERING LABORATORIES

2350 NE Hopkins Court • Pullman, WA • 99163-5603 • USA

Phone: (509) 332-1890 • Fax: (509) 332-7990

E-mail: [email protected] • Internet: www.selinc.com

QUIPMENT

EPAIR AND

ARRANTY

Repair costs of products not covered under this warranty are paid for by customers. Customers

are responsible for the cost of shipping the products to SEL located at: 2350 NE Hopkins Court,

Pullman, Washington 99163 USA.

All products repaired by SEL will be warranted against defects in material and workmanship for a

period of one year from the date the equipment is returned to the customer or the remainder of the

new product warranty, whichever is longer.

IMITATIONS

SEL’s warranty does not extend to (A SEL’s products subject to (i improper installation,

connection, operation, maintenance, or storage; (ii accident, damage, abuse, or misuse; (iii

abnormal or unusual operating conditions or applications outside the specifications for the

product; (iv a purpose or application in any way different from that for which the products were

designed; or (v repairs conducted by persons other than SEL employees or an authorized

representative or distributor; (B Equipment and products not manufactured by SEL. Such

equipment and products may be covered by a warranty issued by the respective manufacturer.

This warranty is in lieu of any other warranties, express or implied, including without limitation,

any warranty of merchantability or fitness for a particular purpose, and is in lieu of any and all

other obligations or liability of SEL. Under no circumstances shall SEL be liable for any

accidential or consequential damages or for any other loss, injury, damage, or expense of any

kind including loss of profits arising hereunder.

To the extent any court, arbitration panel, or other governmental body of competent jurisdiction

shall declare any provision of this warranty invalid or unenforceable by reason of a rule of law or

public policy, all the other provisions hereof shall remain in full force and effect.

All brand or product names appearing in this document are the trademark or registered trademark of their respective holders.

Schweitzer Engineering Laboratories, SELOGIC, Connectorized, and are registered trademarks of Schweitzer Engineering Laboratories.

SEL Standard Product Warranty Date Code 20000120

SEL RELAY INSTRUCTION MANUAL ADDENDUM

ACB PHASE ROTATION OPTION

The SEL relay instruction manuals are written for standard ABC phase rotation applications.

If your SEL relay is ordered with the ACB phase rotation option, references made in the

instruction manual to voltage and current phase angle should be noted accordingly. The

firmware identification number (FID may be used to verify whether your relay was ordered

with ABC or ACB rotation.

All current and voltage inputs are connected to the SEL relay rear panel as shown in the

instruction manual.

Date Code 930719 SEL Relay Addendum A-1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Schweitzer Engineering Laboratories Relais