Schlage S-480 Manuel utilisateur

How to Install

(Door thickness 40-50mm)

1. Please read the installation manual before you install the product.

2. The strike guider is served to install correctly, remove the strike guider

after installation.

3. Please check door thickness and door handing before installation.

This product can be installed with door thickness 40-50mm

Firstly, check the door opens and closes smoothly.

Fold 90° angle on the fold line of the installation template and stick it to the

door and mark for installation.

Drill holes as specified on template.

Where replacing existing mechanical auxiliary lock, use center hole on the

mounting plate to adjust position and install the product.

Fasten the front using screw (M5x30, 2pcs), to fix the mounting plate (as

required check the direction of the mounting plate). Use screw (FH1x 30, 5pcs)

to increase the strength of the mounting plate fixing.

Pull through Front cable and connect to Back connector, and then fix to the

mounting plate by using screw (M5x29, 4pcs).

10.

Fix the strike with screw (FH1x 30, 6pcs) and ensure the deadbolt aligns

correctly with strike.

Insert batteries (check polarity).

Check the door opens and closes properly.

Read the user’s manual to register PIN code.

*For Metal Doors: Please use the T4x19 screws instead of FH1x 30

(Timber Doors).

(Use on indoor side)

Installation Template S-480

Please check measurements

when printing template

83mm

58mm

FH1x 30 (5pcs)

FH1x 30 (3pcs)

Screw

How to Install

(Door thickness 40-50mm)

1. Please read the installation manual before you install the product.

2. The strike guider is served to install correctly, remove the strike guider

after installation.

3. Please check door thickness and door handing before installation.

This product can be installed with door thickness 40-50mm

Firstly, check the door opens and closes smoothly.

Fold 90° angle on the fold line of the installation template and stick it to the

door and mark for installation.

Drill holes as specified on template.

Where replacing existing mechanical auxiliary lock, use center hole on the

mounting plate to adjust position and install the product.

Fasten the front using screw (M5x30, 2pcs), to fix the mounting plate (as

required check the direction of the mounting plate). Use screw (FH1x 30, 5pcs)

to increase the strength of the mounting plate fixing.

Pull through Front cable and connect to Back connector, and then fix to the

mounting plate by using screw (M5x29, 4pcs).

10.

Fix the strike with screw (FH1x 30, 6pcs) and ensure the deadbolt aligns

correctly with strike.

Insert batteries (check polarity).

Check the door opens and closes properly.

Read the user’s manual to register PIN code.

*For Metal Doors: Please use the T4x19 screws instead of FH1x 30

(Timber Doors).

(Use on indoor side)

Installation Template S-480

Please check measurements

when printing template

83mm

58mm

FH1x 30 (5pcs)

FH1x 30 (3pcs)

Screw

Autres manuels pour S-480

Table des matières

Autres manuels Schlage Verrouillage

Schlage

Schlage BE365 Manuel utilisateur

Schlage

Schlage CO-200 Manuel utilisateur

Schlage

Schlage M490DE Manuel utilisateur

Schlage

Schlage FA Series Manuel de service

Schlage

Schlage F60 Manuel utilisateur

Schlage

Schlage AD-250 Manuel utilisateur

Schlage

Schlage L9000 Series Manuel utilisateur

Schlage

Schlage Door Lock Manuel utilisateur

Schlage

Schlage B-Series Manuel utilisateur

Schlage

Schlage L460 Manuel utilisateur

Schlage

Schlage S-7100 Manuel utilisateur

Schlage

Schlage ND170 Manuel utilisateur

Schlage

Schlage CM993 Series Guide de configuration rapide

Schlage

Schlage F-Series Manuel utilisateur

Schlage

Schlage ND50 Manuel utilisateur

Schlage

Schlage FE595 Manuel utilisateur

Schlage

Schlage WA5200 Manuel utilisateur

Schlage

Schlage J Series Manuel utilisateur

Schlage

Schlage AD-200 Manuel utilisateur

Schlage

Schlage AL-SERIES Manuel utilisateur

Schlage

Schlage FE595 Manuel utilisateur

Schlage

Schlage CO-100-CY-70-KP-RHO-626 Manuel utilisateur

Schlage

Schlage GF3000 Gravity Force Series Manuel utilisateur

Schlage

Schlage AD-300 Manuel utilisateur

Manuels Verrouillage populaires d'autres marques

Magic

Magic 105 Manuel utilisateur

Gantner

Gantner GAT NET.Lock 7020 System Guide rapide

Wittkopp

Wittkopp Insys 7202 Manuel utilisateur

Dorma

Dorma Studio Classic Manuel utilisateur

Securam

Securam ECSL-601 Manuel utilisateur

Sudhaus

Sudhaus 3003 Manuel utilisateur

Safety 1st

Safety 1st 48517 Manuel utilisateur

Pado

Pado FDS-10 Manuel utilisateur

Esco

Esco systeQ Series Manuel utilisateur

COMPX

COMPX National D8951 Manuel utilisateur

secureo

secureo Key Box Manuel utilisateur

Stock Loks

Stock Loks C8713 Manuel utilisateur

COMPX

COMPX 1T-058 Manuel du propriétaire

Auslock

Auslock T11 Manuel utilisateur

ELCOM

ELCOM 7205 Manuel utilisateur

Stealth SAFES

Stealth SAFES ShadowVault Manuel utilisateur

Knox

Knox KeySecure 5 Manuel utilisateur

Kwikset

Kwikset 48334/01 Manuel utilisateur