SC&T IP02ET Manuel utilisateur

1

IP CABLING TRANSMISSION –Active Series

ITEM NO.: IP02E IP Extender over Coax 500M

IP02E IP extender is designed to extend any TCP/IP devices for long range transmission up to 500M over

existing coaxial cable. Built in Analog video signal output which could send one Analog video camera and

one IP video by same coax cable. It is perfect to add one IP camera over existing CCTV analog video

camera environment. It is a great hybrid surveillance solution for sending IP video links to remote camera

installation that are beyond the 100 meters distance limit of Ethernet and also support traditional analog

CCTV camera.

IP02E IP Extender over Coax 500M

Extend IP camera signal or any TCP/IP devices over existing coaxial cable.

Send 1 port Analog video signal and 1 port IP video signal over same one coaxial cable.

Long range transmission up to 500 meters (Max.)

Support 10/100BASE-T transmission rate.

Perfect to upgrade the analog camera system into IP CCTV application.

Plug and play for easy installation.

Installation View:

Cable:

Link cable use high quality 75Ω coaxial cable.

RJ45 Define:

Ethernet Cable (Use TIA/EIA-568-B)

1. Orange-White TX+

2. Orange TX-

3. Green-White RX+

4. Blue Reserve

5. Blue-White Reserve

6. Green RX-

7. Brown-White Reserve

8. Brown Reserve

DIP Switch Setting：

IP02ET Uplink data rate setting

１２

↑↑ 21Mbps (default)

↓↑ 25Mbps

↑↓ 28Mbps

↓↓ 36Mbps

2

IP02ER Uplink data rate setting

１２

↑↑ 3Mbps (default)

↓↑ 4Mbps

↑↓ 9Mbps

↓↓ 11Mbps

To make sure the transmission quality, you could setup the DIP Switch based on the cable distance,

a longer distance setup to lower data rate; a short distance could be setup at higher data rate.

LED Indication:

Green ：Power ON/OFF

Yellow ：Ethernet 10/100Mbps linking

Green ：Flash →Data transmission

Panel View:

IP02ET

IP02ER

Specifications:

ITEM NO.

IP02ET

IP02ER

Ethernet Connector

RJ45 x 1

Video Connector

BNC x 1 (75 Ω)

Link Connector

BNC x 1 (75 Ω)

Date Rate Setting

DIP SWITCH x 1

Linking Cable

75Ω coax cable

Ethernet Speed

10/100 Mbps

Data Rate

Uplink：36Mbps , Downlink：11Mbps

Uplink：11Mbps, Downlink:36Mbps

Transmission Distance

500 M (Max)

LED Indication

Ethernet (Yellow/Green) x 1，Power (Green) x 1

Power Consumption

550mA (Max.)

Power Supply

DC 5V 1A

Temperature

Operation: 0 to 55℃, Storage: -20 to 85℃, Humidity: up to 95%

Dimension mm

49.2 x 112.5 x 25.2

Weight g

140

Rev.A

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels SC&T Extenseur

Manuels Extenseur populaires d'autres marques

SY

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manuel utilisateur