SATO ARGOX AS-9400DC Manuel utilisateur

AS-9400DC

Barcode Scanner

User Guide

http://www.argox.com

service@argox.com

Version: 1.2

Date: April 7, 2020

AS-9400

User Guide

Enter Configuration Exit Configuration

Regulatory Compliance

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

CAUTION:

Any changes or modifications not expressly approved by the grantee of this device

could void the user's authority to operate the equipment.

Note: All brands and trademarks are the property of their respective owners.

Note: The specifications contained herein are subject to change without

notice.

警告使用者:

這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，使用

者會被要求採取某些適當的對策。

AS-9400

User Guide

Enter Configuration Exit Configuration

AS-9400

User Guide

Enter Configuration Exit Configuration

iii

Content

Command Barcode................................................................................................................ - 1 -

Restore Factory Default Configuration.................................................................................. - 1 -

Enable All Symbologies.......................................................................................................... - 1 -

Enable only 1D Symbologies.................................................................................................. - 2 -

Enable only 2D Symbologies.................................................................................................. - 2 -

Disable All Symbologies......................................................................................................... - 2 -

Disable only 1D Symbologies................................................................................................. - 2 -

Disable only 2D Symbologies................................................................................................. - 3 -

Scanning Mode...................................................................................................................... - 3 -

Trigger Mode (Default)...................................................................................................... - 3 -

Auto Sense Mode .............................................................................................................. - 3 -

Continuous Mode.............................................................................................................. - 3 -

USB Interface (Optional)........................................................................................................ - 4 -

USB HID-KBW..................................................................................................................... - 4 -

USB COM Port Emulation.................................................................................................. - 4 -

Terminator Configuration...................................................................................................... - 4 -

Convert Case.......................................................................................................................... - 5 -

SYMBOLOGIES ....................................................................................................................... - 5 -

UPC / EAN , 2/5 Add-On Code........................................................................................... - 5 -

UPC-A, UPC-E, EAN-13, and EAN-8 , with add-on 2/5codes.............................................. - 6 -

UPC-A................................................................................................................................. - 6 -

UPC-E................................................................................................................................. - 8 -

EAN-8................................................................................................................................. - 9 -

EAN 13 ............................................................................................................................. - 10 -

Code 128.......................................................................................................................... - 12 -

Code 39............................................................................................................................ - 13 -

AS-9400

User Guide

Enter Configuration Exit Configuration

Code 39............................................................................................................................ - 14 -

Code 93............................................................................................................................ - 15 -

Code 32............................................................................................................................ - 15 -

Code 11............................................................................................................................ - 16 -

Codabar ........................................................................................................................... - 17 -

Plessey............................................................................................................................. - 18 -

MSI Plessey...................................................................................................................... - 19 -

Interleaved 2 of 5 ............................................................................................................ - 20 -

IATA 2 of 5 ....................................................................................................................... - 21 -

Matrix 2 of 5 .................................................................................................................... - 21 -

Straight 2 of 5 .................................................................................................................. - 22 -

Pharmacode..................................................................................................................... - 22 -

RSS-14.............................................................................................................................. - 23 -

RSS-14 Expanded............................................................................................................. - 24 -

RSS-14 Limited................................................................................................................. - 25 -

Composite Code-A........................................................................................................... - 25 -

Composite Code-B........................................................................................................... - 26 -

Composite Code-C........................................................................................................... - 26 -

PDF 417............................................................................................................................ - 27 -

Micro PDF 417 ................................................................................................................. - 27 -

Data Matrix...................................................................................................................... - 28 -

Rectangular Data Matrix ................................................................................................. - 28 -

QR.................................................................................................................................... - 29 -

Micro QR.......................................................................................................................... - 30 -

Aztec................................................................................................................................ - 30 -

MaxiCode......................................................................................................................... - 31 -

DotCode........................................................................................................................... - 31 -

AS-9400

User Guide

Enter Configuration Exit Configuration

Configure decoding length for different types of barcodes................................................ - 32 -

Code 128 Decoding Length.............................................................................................. - 33 -

Code 39 Decoding Length................................................................................................ - 34 -

Code 93 Decoding Length................................................................................................ - 35 -

Codabar Decoding Length ............................................................................................... - 36 -

Interleaved 2 of 5 Decoding Length ................................................................................ - 37 -

Code 11 Configure decoding Length ............................................................................... - 38 -

MSI Plessey Configure decoding Length ......................................................................... - 39 -

Matrix 2 of 5 Configure decoding Length........................................................................ - 40 -

AIM ID Prefix........................................................................................................................ - 41 -

Appendix 1: AIM ID Table................................................................................................ - 42 -

Function Key Mapping......................................................................................................... - 43 -

Custom prefix for different types of barcodes.................................................................... - 43 -

Configure prefix for UPC-A.............................................................................................. - 44 -

Configure prefix for UPC-E .............................................................................................. - 44 -

Configure prefix for EAN-8 .............................................................................................. - 45 -

Configure prefix for EAN-13 ............................................................................................ - 45 -

Configure prefix for Code128.......................................................................................... - 46 -

Configure prefix for Code39............................................................................................ - 46 -

Configure prefix for Code93............................................................................................ - 47 -

Configure prefix for Code32............................................................................................ - 47 -

Configure prefix for Code11............................................................................................ - 48 -

Configure prefix for Codabar........................................................................................... - 48 -

Configure prefix for Plessey............................................................................................. - 49 -

Configure prefix for MSI Plessey ..................................................................................... - 49 -

Configure prefix for Interleaved 2 of 5............................................................................ - 50 -

Configure prefix for IATA 2 of 5....................................................................................... - 50 -

Configure prefix for Matrix 2 of 5.................................................................................... - 51 -

AS-9400

User Guide

Enter Configuration Exit Configuration

Configure prefix for Straight2 of 5................................................................................... - 51 -

Configure prefix for Pharmacode.................................................................................... - 52 -

Configure prefix for RSS-14 ............................................................................................. - 52 -

Configure prefix for Composite Code A........................................................................... - 53 -

Configure prefix for Composite Code B........................................................................... - 53 -

Configure prefix for Composite Code C........................................................................... - 54 -

Configure prefix for PDF417............................................................................................ - 54 -

Configure prefix for Micro PDF417.................................................................................. - 55 -

Configure prefix for Data Matrix ..................................................................................... - 55 -

Configure prefix for QR.................................................................................................... - 56 -

Configure prefix for Micro QR ......................................................................................... - 56 -

Configure prefix for Aztec ............................................................................................... - 57 -

Configure prefix for MaxiCode ........................................................................................ - 57 -

Custom suffix for different types of barcodes................................................................. - 58 -

Configure suffix for UPC-A............................................................................................... - 58 -

Configure suffix for UPC-E............................................................................................... - 59 -

Configure suffix for EAN-8............................................................................................... - 59 -

Configure suffix for EAN-13............................................................................................. - 60 -

Configure suffix for Code 128.......................................................................................... - 60 -

Configure suffix for Code 39............................................................................................ - 61 -

Configure suffix for Code93............................................................................................. - 61 -

Configure suffix for Code32............................................................................................. - 62 -

Configure suffix for Code11............................................................................................. - 62 -

Configure suffix for Codabar ........................................................................................... - 63 -

Configure suffix for Plessey ............................................................................................. - 63 -

Configure suffix for MSI Plessey...................................................................................... - 64 -

Configure suffix for Interleaved 2 of 5 ............................................................................ - 64 -

Configure suffix for IATA 2 of 5 ....................................................................................... - 65 -

AS-9400

User Guide

Enter Configuration Exit Configuration

vii

Configure suffix for Matrix 2 of 5 .................................................................................... - 65 -

Configure suffix for Straight 2 of 5 .................................................................................. - 66 -

Configure suffix for Pharmacode..................................................................................... - 66 -

Configure suffix for RSS-14.............................................................................................. - 67 -

Configure suffix for RSS-14 Expanded............................................................................. - 67 -

Configure suffix for RSS-14 Limited................................................................................. - 68 -

Configure suffix for Composite Code A ........................................................................... - 68 -

Configure suffix for Composite Code B ........................................................................... - 69 -

Configure suffix for Composite Code C ........................................................................... - 69 -

Configure suffix for PDF417............................................................................................. - 70 -

Configure suffix for Micro PDF417 .................................................................................. - 70 -

Configure suffix for Data Matrix...................................................................................... - 71 -

Configure suffix for QR .................................................................................................... - 71 -

Configure suffix for Micro QR.......................................................................................... - 72 -

Configure suffix for Aztec................................................................................................ - 72 -

Configure suffix for Maxicode ......................................................................................... - 73 -

ASCII Code Table.................................................................................................................. - 73 -

Serial command................................................................................................................. - 100 -

Sending and Receiving format and feedback messages ............................................... - 100 -

Setup process ................................................................................................................ - 101 -

Reading process............................................................................................................. - 102 -

Command Library .............................................................................................................. - 103 -

AS-9400

User Guide

Enter Configuration Exit Configuration

- 1 -

Command Barcode

Scanning the Enter Setup Code can enable the engine to enter the setup mode. Then you can

scan a number of command codes to configure your scanner. To exit the setup mode, scan the

Exit Setup code.

Enter Configuration Exit Configuration

Important Notes:

All configurations need to go through below steps except Factory Defaults.

Scan “Enter Setup” → “Command Barcode” →”Exit Setup”

Restore Factory Default Configuration

Enable All Symbologies

If Enable All Symbologies feature is enabled, the scanner will be able to read all 1D and 2D

barcodes except the command barcodes.

Enable All Symbologies

AS-9400

User Guide

Enter Configuration Exit Configuration

- 2 -

Enable only 1D Symbologies

If Enable only 1D Symbologies feature is enabled, the scanner will be able to read only 1D

barcodes except the command barcodes.

Enable only 1D Symbologies

Enable only 2D Symbologies

If Enable only 2D Symbologies feature is enabled, the scanner will be able to read only 2D

barcodes except the command barcodes.

Enable only 2D Symbologies

Disable All Symbologies

If all symbologies feature is disabled, the scanner will not be able to read any 1D or 2D barcodes.

Disable All Symbologies

Disable only 1D Symbologies

If only 1D Symbologies feature is disabled, the scanner will not be able to read any 1D barcodes.

Disable only 1D Symbologies

Autres manuels pour ARGOX AS-9400DC

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels SATO Lecteur de codes-barres

SATO

SATO Argox AI-6800 Manuel utilisateur

SATO

SATO ARGOX AS-9400BT Manuel utilisateur

SATO

SATO Argox P4 Series Manuel utilisateur

SATO

SATO Argox D4 Series Manuel utilisateur

SATO

SATO PV3 Manuel utilisateur

SATO

SATO ARGOX AS-9400 Manuel utilisateur

SATO

SATO MB200 Manuel utilisateur

SATO

SATO CT4i Series Manuel utilisateur

SATO

SATO WS408TT-STD Manuel utilisateur

SATO

SATO Argox D4 Series Manuel utilisateur

SATO

SATO DR308e Manuel utilisateur

SATO

SATO GT400 series Manuel utilisateur

SATO

SATO CG412DT Manuel utilisateur

SATO

SATO GT4e Manuel utilisateur

SATO

SATO PV4 Manuel utilisateur

SATO

SATO CL4e Series Manuel utilisateur

SATO

SATO TC408 Manuel utilisateur

SATO

SATO MB410i Manuel utilisateur

SATO

SATO MB200 Manuel utilisateur

SATO

SATO SG112 ex Manuel utilisateur

SATO

SATO Argox AR-3100 Manuel utilisateur

SATO

SATO MB400I Manuel utilisateur

SATO

SATO PV3 Instructions de montage

SATO

SATO CL4NX RIDF Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur