SATO KEIRYOKI 1722-00 Manuel utilisateur

3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 Japan

URL: http://www.sksato.co.jp/english/

Instruction Manual for

Bimetal Thermometer for Meat

Thank you for purchasing Bimetal Thermometer for Meat.

- This product is designed to measure temperature (0 to 100°C) of a loaf of meat. Do not

use it for other purposes.

- Read this manual thoroughly before using the bimetal thermometer. Keep the manual in a

safe place for future references whenever necessary.

Measurements

1. Use the clip to put the clip on the edge of pan.

2. Insert the sensing stem into the target to the mark (about 9.5cm from the end) at least.

3. After the measurement, wipe the grim on the stem with a kitchen paper or like confirming

that the temperature is lower than 40°C.

Name of Section

NB. Never use the thermometer in the cooking equipment such as microwave and

oven

Cautions

For your safety and proper use of the bimetal thermometers, be sure to observe the following:

- Never use the bimetal thermometer out of the measurement range (0 to 100°C).

- Never disassemble or alter the thermometer, which may cause malfunctions.

- Do not drop, bent or apply shock to the thermometers. Otherwise, malfunctions may occur.

- Do not alter, bend or bind the sensing stem, as doing so may break or damage the

thermometer.

- Do not wash the thermometer with water. This is not waterproof type

- To prevent injury, be careful of the sharp tip of the sensing stem especially when cleaning

the stem after taking measurements.

- To prevent injury, be careful of the sharp tip of the sensing stem especially when cleaning the

stem after taking measurements.

- This thermometer cannot be used for approval purpose.

meter

the mark (about 9.5cm from the end)

sensing stem

holder

3-4, Kanda-kajicho, Chiyoda-ku, Tokyo 101-0045 Japan

URL: http://www.sksato.co.jp/english/

Maintenance

For accurate measurements, it is desirable to confirm the accuracy of the bimetal

thermometers in comparison with the reliable thermometers once a year.

Specifications

Name of Product

Bimetal Thermometer for Meat

Model No.

1722-00

Measuring range

0 to 100℃

Min. Graduation

1℃

Accuracy

±1℃

Sensing Elements

Bimetal

Materials

Case

Stainless Steel

Case cover

Glass

Stem

Stainless Steel

Clip

Stainless Steel

Case Diameter

50 mm

Sensing Stem

4 mm dia. x 150 mm (L) point end

Weight

approx. 32g

Autres manuels SATO KEIRYOKI Instrument de mesure

SATO KEIRYOKI

SATO KEIRYOKI PC-7700 II Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-5RAD-MR Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-620PHII Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-181GT Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI PC-9225 Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI NSII-TQ Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-630PH Series Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-M350-TRH-I Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI 1410-00 Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI PC-7700II Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SWPII-07 Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-610PH-II Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI 1518-00 Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI 7820-00 Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI PC-51D Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI S270WP Series Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI PC-5000TRH II Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-660PH Series Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-M350-TRH Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI PALMA 2 Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-620PH Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI SK-RHG Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI PC-5200TRH Manuel utilisateur

SATO KEIRYOKI

SATO KEIRYOKI 7790-00 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur