SatKing ORBIT 85 Manuel utilisateur
User’s manual
www.satkingorbit.com.au
ver 1.0
Fully Automatic
Fully Automatic
Motorised Satellite TV System
Motorised Satellite TV System
Fully Automatic
Motorised Satellite TV System
1. General Information
.............................................................................................
...............................................................................
.............................................................................................
1-1. Introduction
1-2. Proper use and operation
1-3. Safety notes
2
3
4
2. Contents
...................................................................................
...........................................................................................
2-1. Components bundle
2-2. Name of parts
5
6
9. Caravan/Motorhome installation
..................................................................
..............................................................................
...............................................................................................
......................................................................................
.................................................................................................
9-1. Required space for the SatKing ORBIT
9-2. Equipment for installation
9-3. Installation
9-4. Battery connection
9-5. Options
16
17
17
21
22
6. Extra functions
...........................................................................................
............................................................................................
.......................................................................................
......................................................................................
6-1. Error message
6-2. Factory reset
6-3. Software upgrade
6-4. Advanced settings
12
12
12
13
.........................................................................................
..................................................................................
..................................................................
............................................................................
5-1. Get ready to use
5-2. Searching the satellite
5-3. Back to HOME position & Turning o
5-4. STB power detection On/O
11
11
11
11
8. Specications
...............................................................................................
............................................................................................
8-1. Dimension
8-2. Specications
15
15
7. Troubleshooting ................................................................................ 14
3. How to assemble dish (reector)
4. Connection diagram
5. Functional description
.......................................................
...........................................................................
.......................................................................
7
9
10
Contents
ENGLISH - 2
1. General Information
1-1. Introduction
These instructions describe the functions and operation of the SatKing ORBIT fully
automatic satellite system.
Correct and safe operation of the system can only be ensured by following these
instructions.
Your SatKing ORBIT is an intelligent satellite TV reception antenna system which can
align itself towards a preset satellite automatically when the system is located within
the footprint of the selected satellite. The latest Australian coverage map is available on
www.satkingorbit.com.au.
For general operation, please ensure that the system always has a clear view of the
Northern Sky. If the satellite‘s signal beam is interrupted by obstacles such as buildings
or trees, the unit will not function and no satellite TV signal will be received, move your
van slightly and try again. For more information on general use of this unit consult your
local dealer for assistance.
ENGLISH - 3
•
•
•
•
•
•
•
•
•
•
Please also note the following instructions from SatKing:
1-2. Proper use and operation
This product has been designed for xed installation on vehicles with maximum speeds
of 130 km/h. It is designed to automatically aim an antenna at geostationary television
satellites. The power to the system is supplied by a standard vehicle electrical system
with a rated voltage of 12 Volts.
12V DC is default and recommended for use. If 24V DC has to be used, separate DC to
DC downconverter must be used.
Use of the equipment for any other purpose to the one specied is not permitted.
It is not possible to add or remove components on this product.
The use of other components other than those originally supplied.
When completing installation you or your contractor must strictly follow all instructions
in the supplied user manual. Failure to follow the user manual may cause damage to the
SatKing ORBIT or your vehicle.
The product does not require any regular maintenance; all service must be carried out at
approved service centre’s.
All relevant guidelines of the automotive industry must be observed and complied with.
The equipment must only be installed on solid vehicle roofs.
Avoid cleaning your vehicle with the mounted satellite system in a drive-through car
wash or a car wash with a high-pressure cleaner.
The SatKing ORBIT comes with a 2 year warranty, for full warranty details please visit our
website www.satkingorbit.com.au
If you are using VAST all card activation and channel entitlement issue's are handled by
the VAST call centre 1300 993 376. Their hours are 9am till 12pm and 2pm till 4.30pm
QLD time.
ENGLISH - 4
1-3. Safety notes
Please carefully read and follow the operating instructions in this manual.
Upon installation of the ORBIT, please ensure the installation is done with supplied
cables and ensure the controller cable is not modied in anyway, this carries data.
The driver of the vehicle must inspect the antenna unit before driving o to ensure
that the antenna is properly stored in safe. Check to see if the antenna is fully folded.
As the user of this equipment, you are responsible for yourself ensuring compliance
with the relevant laws and regulations.
The manufacturer does not take liability for direct or indirect consequential damage
of the system, motor vehicles or other equipment by reason of unsuitable battery
usage or erroneous installation or wrong wire connection.
ENGLISH - 5
2. Contents
2-1. Components bundle
Actual components may dier from the above images.
※
Reector
LNB arm
Controller cable (pre-connected)
Cable gland
Mounting plate
LNB protection pad
Reector assembly
LNB arm assembly
Cable holder
Deector User manual
Controller bracket,
Rear cable cover
M4×20(13), Washer(4)
M8 locking nut(4)
STB cable (3m)
Controller
Truss head M6×15 (4),
M6 Flat mold washer (4)
Cable clamp (2), Sems1 M4×10 (2)
Sems2 M6x55 (1)
Power input cableSignal cable (7m)
(x2 for twin output)
Main unit
ENGLISH - 6
2-2. Name of parts
Main unit
Controller
Reector
LNB
LNB arm
LNB cable
LNB connector
Cable clamp
Main body
Base
Reector bracket
Auto skew cable
Deector
Mounting plate
to Controller ("ANT" port)
to STB (optional)
to Controller ("ANTENNA UNIT" port)
• Front
• Back
OnLED Indicator
Power S/W
USB port
Controller bracket hole
HOME LED
Lock LED
GPS LED
Satellite
LEDs
Mode button
Manual mode LEDs
GPS LED
HOME button
Arrow buttons
OK button
BlinkingO
STB cable to STB
Signal cable from Main unit
Dip switch (Mode selector) Controller cable from Main unit
Power port
Note. Make sure that dip switch is set for right mode. (see page10)
ENGLISH - 7
3. How to assemble dish (reector)
To avoid cable damage, x LNB cable and auto skew cable as enlarged image
on following page.
※
Step 1 :
Step 2 :
Step 3 :
Press POWER button on the controller to turn on the unit and press OK button on
any satellite
When reector bracket is lifted up to vertical direction(about 90 degrees), turn
the unit o
Connect the reector to the reector bracket
Step 4 :
Step 5 :
Step 6 :
Combine LNB arm with reector bracket
Connect LNB cables and auto skew cable to the connector on the body, and cover
the connectors on both sides with waterproof cap for protection
Align LNB cables on the body using cable clamps
Step 7 : Power on and check the installation is completed by selecting HOME position
Connect LNB cable to body
and align using cable clamp.
Reector bracket is connected to
the reector
LNB arm is connected to
reector bracket
ENGLISH - 8
To avoid cable damage, x LNB
cable and auto skew cable using
cable clamp.
※
①
②
③
④
⑤
⑥
⑦
⑧
1
1
1
4
4
1
2
2
Reector
LNB arm
Reector bracket
M6 at mold washer
Truss head M6x15
SEMS2 M6x55
Cable clamp
SEMS1 M4x10
No QuantityPart name
Required parts for assembly
1
2
6
5
5
3
4
4
7
8
※
C
a
b
l
e
c
l
a
m
p
,
S
E
M
S
1
M
4
x
1
0
ENGLISH - 9
4. Connection diagram
MAIN UNIT
Use controller cable to connect the antenna to the controller. Controller cable is
pre-connected to the main body.
STB cable and signal cable are dierent lengths. Please check the lengths to use the
correct cable for the job.
Please ensure the supplied cables are used and not modied in anyway.
•
•
•
CONTROLLER
Controller cable
※For second STB & TV
※For 24V power supply
Signal cable Power input cable
Signal cable (7m)
STB TV
Ignition
12V Battery
Power input cable
Ignition
24V Battery
DC-DC converter
STB cable (3m)
STB
TV
Table des matières
Autres manuels SatKing Système de télévision par satellite
Manuels Système de télévision par satellite populaires d'autres marques
Dish TV
Dish TV DVB-S6800PLUS Manuel utilisateur
Avermedia
Avermedia AVer3D R889 Manuel utilisateur
Kathrein
Kathrein MobiSet 2 Digital CAP 600 Manuel utilisateur
KVH Industries
KVH Industries TracVision R5SL Manuel utilisateur
Philips
Philips DSX 5250 Manuel utilisateur
Winegard
Winegard RMFLDM4 Manuel utilisateur
DefineSat
DefineSat VM55 Manuel utilisateur
Dish Network
Dish Network 112182 Manuel utilisateur
Thrane&Thrane
Thrane&Thrane sailor 60 Manuel technique
KVH Industries
KVH Industries TracVision L2 Manuel utilisateur
KVH Industries
KVH Industries TracVision TV1 Manuel utilisateur
JRC
JRC NJT8304 Series Manuel utilisateur
Bell
Bell EXPRESSVU Manuel utilisateur
Promax
Promax SATHUNTER Manuel utilisateur
KVH Industries
KVH Industries TracVision M5 Manuel utilisateur
KVH Industries
KVH Industries TracVision R5SL Manuel utilisateur
Dish Network
Dish Network Satellite Television Manuel utilisateur
Uniden
Uniden SQ530 Manuel utilisateur