Sanus Systems VISIONMOUNT VMXA1 Manuel utilisateur

Assembly Instructions for Model: VMXA1

Thank you for choosing a Sanus Systems VisionMount™ Model: VMXA1. The VMXA1 is 8″ [203 mm] longer and replaces the Center

Plate provided with the VMPL3. The VMXA1 is designed to hold up to 280 lbs [127 kg].

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 08.02.06 (100042)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Step 1: Congure Wall Plate Assembly

NOTE: VMXA1 replaces the standard Center Plate in the Wall Plate Assembly (A) provided with the VMPL3. These instructions

replace Step 7: Congure Wall Plate Assembly, of the Assembly Instructions for Model: VMPL3.

Using the VMXA1, the Wall Plate Assembly (A) can be adjusted in width from 35″ to 50″ [889 mm to 1270 mm]. Determine how wide you

want the Wall Plate Assembly based on the following criteria:

• Width of television (Wall Plate Assembly should be congured so the total width is less than the overall width of your television)

• Width of Hole Pattern on television (Wall Plate Assembly should be wider than the horizontal distance between threaded inserts on the

back of your TV by at least 2″ [50.8 mm])

• Stud Spacing (Sanus recommends attaching Wall Plate Assembly to three studs for televisions over 125 lbs. [56.7 Kg])

To adjust the width of the Wall Plate Assembly (A) using the VMXA1:

Remove each Flange Nut and Nylon Washer from the Wall Plate Assembly (A) as shown in Diagram 1A.

Diagram 1A

Flange

Nut

Wall Plate

Assembly (A)

Nylon

Washer

Remove the Center Plate of the Wall Plate Assembly (A) as shown in Diagram 1B.

Diagram 1B

Center

Plate

Using the previously removed Flange Nuts and Nylon Washers, secure the Right and Left Extension to the VMXA1 as shown in Diagram

1D, and securely tighten the Flange Nuts.

Diagram 1D

Flange

Nut Nylon

Washer

Left

Extension

VMXA1

Right

Extension

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 08.2.06 (100042)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Separate the Left and Right Extension of the Wall Plate Assembly (A) and set them to so that their outer edges are equal to the desired

width.

NOTE: All four of the Threaded Studs must pass through the VMXA1 for the installation to be safe.

Insert the VMXA1 so the teeth on its bottom t into the slots in the Left and Right Extension, making sure that the Threaded Studs t

through the center row on holes in the VMXA1 as shown in Diagram 1C.

Diagram 1C

Left

Extension

VMXA1

Right

Extension

Threaded

Studs

Table des matières

Autres manuels Sanus Systems Support TV

Sanus Systems

Sanus Systems VisionMount VMDD26 Manuel utilisateur

Sanus Systems

Sanus Systems TELEVISION TURNTABLES TV32 Manuel utilisateur

Sanus Systems

Sanus Systems VisionMount VM1 Manuel utilisateur

Sanus Systems

Sanus Systems PFFP2 Manuel utilisateur

Sanus Systems

Sanus Systems VMFL1 Manuel utilisateur

Sanus Systems

Sanus Systems VisionMount 6901-100068 Manuel utilisateur

Sanus Systems

Sanus Systems VMPL50A Manuel utilisateur

Sanus Systems

Sanus Systems VMPL250B Manuel utilisateur

Sanus Systems

Sanus Systems LAS1A Manuel utilisateur

Sanus Systems

Sanus Systems VISIONMOUNT VLT14 Manuel utilisateur

Sanus Systems

Sanus Systems New VisionMount VLL10 Manuel utilisateur

Sanus Systems

Sanus Systems FFMF2A Manuel utilisateur

Sanus Systems

Sanus Systems FFMF2A Manuel utilisateur

Sanus Systems

Sanus Systems XAS1A Manuel utilisateur

Sanus Systems

Sanus Systems VMF Manuel utilisateur

Sanus Systems

Sanus Systems Sanus VisionMount LRF118-B1 Manuel utilisateur

Sanus Systems

Sanus Systems VM400 Manuel utilisateur

Sanus Systems

Sanus Systems VisionMount VLMF109 Manuel utilisateur

Sanus Systems

Sanus Systems New VisionMount LMT15-B1 Manuel utilisateur

Sanus Systems

Sanus Systems FPM18 DP Manuel utilisateur

Sanus Systems

Sanus Systems New VisionMount LMT15 Manuel utilisateur

Sanus Systems

Sanus Systems VisionMount SF203 Manuel utilisateur

Sanus Systems

Sanus Systems New VisionMount VLMF109-B1 Manuel utilisateur

Sanus Systems

Sanus Systems VisionMount VMPL2 Manuel utilisateur

Manuels Support TV populaires d'autres marques

Ergotron

Ergotron Neo Flex Cantilever UHD Manuel utilisateur

StarTech.com

StarTech.com FPCEILBTB Manuel utilisateur

VonHaus

VonHaus 05/038 Manuel utilisateur

Techlink

Techlink ECHO TV Manuel utilisateur

Sandstrom

Sandstrom SSTVMC12X Manuel utilisateur

Sony

Sony SU-WL700 Mode d’emploi

ICW

ICW SCACC18 Manuel utilisateur

LG WM-L640V Manuel utilisateur

Gembird

Gembird WM-65ST-01 Manuel utilisateur

ERARD

ERARD FiTUP XXL 035320 Manuel utilisateur

PEERLESS

PEERLESS PLCK-1 Mode d’emploi

Kanto

Kanto RCF180 Manuel utilisateur

GEM

GEM GEM GP001 Manuel utilisateur

Gladiator Joe

Gladiator Joe GJ0A0053 Manuel utilisateur

Vivotek

Vivotek AM-105 Manuel utilisateur

Vivo

Vivo VESA STAND-VAD1B Manuel utilisateur

AmazonBasics

AmazonBasics B07QG3LMG4 Manuel utilisateur

Secura

Secura QLF210 Manuel utilisateur