Sans Digital ER208UT+B Manuel utilisateur

ELITERAID ER208

DETAILED USER’S MANUAL v1.0

WARRANTY

The information in this document is subject to change without notice.

We make no warranty of any kind regarding this material, including, but

not limited to, the implied warranties or merchantability and ﬁtness for

a particular purpose. Furthermore, we shall not be liable for errors con-

tained herein or for incidental or consequential damage in connection

with the furnishing, performance, or use of this material.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against interfer-

ence in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in ac-

cordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation.

CE Mark

This equipment is in conformity with EM directive.

Contents

1. Introduction .............................................................. 10

1.1 System Architecture ......................................................... 10

1.1.1 eSATA/USB 2.0 Host Interface ...................................... 10

1.1.2 SATA ll Drive Interface ............................................... 11

1.2 RAID Controller Controller Board ....................................... 11

1.2.1 Unparalleled Performance ............................................. 11

1.2.2 Unsurpassed Data Availability ....................................... 12

1.2.3 Easy RAID Management ............................................... 12

2. Conguration Methods .............................................. 14

2.1 Using local rear panel touch-control keypad.........................14

2.2 VT100 terminal (Using the controller’s serial port) ................16

2.2.1 RAID Controller RS-232C Port Pin Assignment .................16

2.2.2 Start-up VT100 Screen.................................................17

2.3 Web browser-based RAID manager.....................................20

2.4 Conguration Menu Tree ...................................................20

3. LCD Conguration Menu ............................................22

3.1 Starting LCD Conguration Utility ......................................22

3.2 LCD Conguration Utility Main Menu Options........................23

3.3 Conguring Raid Sets and Volume Sets ...............................24

3.4 Designating Drives as Hot Spares.......................................24

3.5 Using Easy RAID Conguration ..........................................24

3.6 Using Raid Set and Volume Set Functions ...........................26

3.7 Navigation Map of the LCD ...............................................27

3.7.1 One-step creation Using LCD Hot Key.............................29

3.7.2 Quick Volume And Raid Setup .......................................29

3.7.3 Raid Set Functions.......................................................30

3.7.3.1 Create A New Raid Set ...........................................31

3.7.3.2 Delete Raid Set ......................................................31

3.7.3.3 Expand Raid Set .....................................................32

3.7.3.4 Ofine RAID Set .....................................................32

3.7.3.5 Activate Incomplete RaidSet.....................................33

3.7.3.6 Create Hot Spare Disk.............................................33

3.7.3.7 Delete Hot Spare Disk .............................................33

3.7.3.8 Display Raid Set Information ....................................33

3.7.4 Volume Set Functions ..................................................34

3.7.4.1 Create Raid Volume Set ..........................................35

3.7.4.1.1 Volume Name.....................................................35

3.7.4.1.2 Raid Level .........................................................35

3.7.4.1.3 Stripe Size .........................................................35

3.7.4.1.4 Cache Mode .......................................................36

3.7.4.1.5 Host Channel......................................................36

3.7.4.1.6 Drive Number.....................................................36

3.7.4.1.7 SATA Xfer Mode ..................................................37

3.7.4.1.8 Capacity ............................................................37

3.7.4.1.9 Initialization Mode...............................................37

3.7.4.2 Delete Existed Volume Set .......................................38

3.7.4.3 Modify Volume Set Attribute.....................................38

3.7.3.3.1 Volume Set Migration ..........................................39

3.7.4.4 Check Volume Set Consistency .................................39

3.7.4.5 Stop Volume Set Consistency Check..........................39

3.7.4.6 Display Volume Set Information................................39

3.7.5 Physical Drive Functions ..............................................40

3.7.5.1 Display Drive Information .......................................41

3.7.5.2 Create Pass Through Disk .......................................41

3.7.5.3 Modify Pass Through Disk .......................................42

3.7.5.4 Delete Pass Through Disk ........................................42

3.7.5.5 Identify The Selected Drive ......................................42

3.7.6 Raid System Functions .................................................42

3.7.6.1 Mute The Alert Beeper ............................................45

3.7.6.2 Alert Beeper Setting ...............................................45

3.7.6.3 Change Password ...................................................45

3.7.6.4 JBOD/RAID Mode Conguration ................................45

3.7.6.5 Raid Rebuild Priority................................................46

3.7.6.6 Maximum SATA Mode Supported...............................46

3.7.6.7 Host NCQ Mode Setting ...........................................46

3.7.6.8 HDD Read Ahead Cache...........................................47

3.7.6.9 Volume Data Read Ahead.........................................47

3.7.6.10 Stagger Power On Control ......................................47

3.7.6.11 Spin Down Idle HDD..............................................48

3.7.6.12 Empty HDD Slot LED Control ..................................48

3.7.6.13 HDD SMART Status Polling .....................................48

3.7.6.14 Disk Capacity Truncation Mode................................48

3.7.6.15 Terminal Port Conguration ....................................49

3.7.6.16 Shutdown The Controller........................................50

3.7.6.17 Restart The Controller ...........................................50

3.7.7 Ethernet Conguration .................................................50

3.7.7.1 DHCP ....................................................................50

3.7.7.2 Local IP Adress.......................................................51

3.7.7.3 HTTP Port Number ..................................................51

3.7.7.4 Telnet Port Number .................................................51

3.7.7.5 SMTP Port Number..................................................52

3.7.7.6 Ethernet Address ....................................................52

3.7.8 Show System Events ...................................................52

3.7.9 Clear all Event Buffers..................................................52

3.7.10 Hardware Monitor Information.....................................52

3.7.11 System Information ...................................................53

4. VT-100 Utility Conguration .....................................54

4.1 Conguring Raid Sets/Volume Sets.....................................54

4.2 Designating Drives as Hot Spares.......................................55

4.3 Using Quick Volume /Raid Setup Conguration .....................55

4.4 Using Raid Set/Volume Set Function Method ........................57

4.5 Main Menu .....................................................................59

4.5.1 Quick Volume/Raid Setup .............................................60

4.5.2 Raid Set Function ........................................................63

4.5.2.1 Create Raid Set .....................................................64

4.5.2.2 Delete Raid Set ......................................................65

4.5.2.3 Expand Raid Set .....................................................66

4.5.2.4 Ofine Raid Set ......................................................67

4.5.2.5 Activate Raid Set ....................................................67

4.5.2.6 Create Hot Spare....................................................68

4.5.2.7 Delete Hot Spare ....................................................68

4.5.2.8 Rescue Raid Set .....................................................69

4.5.2.9 Raid Set Information...............................................69

4.5.3 Volume Set Function ....................................................70

4.5.3.1 Create Volume Set..................................................71

4.5.3.1.1 Volume Name.....................................................72

4.5.3.1.2 Raid Level..........................................................73

4.5.3.1.3 Capacity ............................................................73

4.5.3.1.4 Strip Size...........................................................75

4.5.3.1.5 Host Channel......................................................75

4.5.3.1.6 Drive Number.....................................................76

4.5.3.1.7 Cache Mode .......................................................77

4.5.3.1.8 SATA Xfer Mode ..................................................77

4.5.3.2 Delete Volume Set ..................................................78

4.5.3.3 Modify Volume Set ..................................................79

4.5.3.3.1 Volume Expansion...............................................79

4.5.3.3.2 Volume Set Migration ..........................................80

4.5.3.4 Check Volume Set...................................................81

4.5.3.5 Stop Volume Set Check ...........................................81

4.5.4 Physical Drives............................................................82

4.5.4.1 View Drive Information ...........................................83

4.5.4.2 Create Pass-Through Disk ........................................83

4.5.4.3 Modify Pass-Through Disk ........................................84

4.5.4.4 Delete Pass-Through Disk ........................................84

4.5.4.5 Identify Selected Drive ............................................84

4.5.5 Raid System Function ..................................................85

4.5.5.1 Mute The Alert Beeper ............................................85

4.5.5.2 Alert Beeper Setting................................................86

4.5.5.3 Change Password ...................................................87

4.5.5.4 JBOD/RAID Function ...............................................87

4.5.5.5 Background Task Priority .........................................88

4.5.5.6 Maximum SATA Mode ..............................................89

4.5.5.7 Host NCQ Mode Setting ...........................................89

4.5.5.8 HDD Read Ahead Cache...........................................90

4.5.5.9 Volume Data Read Ahead.........................................91

4.5.5.10 Stagger Power On .................................................91

4.5.5.11 Spin Down Idle HDD..............................................92

4.5.5.12 Empty HDD Slot LED .............................................93

4.5.5.13 HDD SMART Status Polling .....................................94

4.5.5.14 Auto Activate Raid Set ...........................................94

4.5.5.15 Capacity Truncation ..............................................95

4.5.5.16 Terminal Port Cong ..............................................96

4.5.5.17 Update Firmware ..................................................97

4.5.5.18 Shutdown Controller..............................................97

4.5.5.19 Restart Controller .................................................97

4.5.6 Ethernet Conguration ................................................98

4.5.6.1 DHCP Function .......................................................99

4.5.6.2 Local IP Address ................................................... 100

4.5.6.3 HTTP Port Number ................................................ 100

4.5.6.4 Telent Port Number ............................................... 101

4.5.6.5 SMTP Port Number................................................ 102

4.5.6.6 Ethernet Address .................................................. 102

4.5.7 View System Events .................................................. 103

4.5.8 Clear Events Buffer.................................................... 104

4.5.9 Hardware Monitor Information .................................... 104

4.5.10 System Information ................................................. 105

5. Web Browser-based Conguration ......................... 106

5.1 Firmware-embedded TCP/IP & web browser-based RAID man-

ager (using the controller’s 10/100 LAN port) .......................... 107

5.2 Web Browser Start-up Screen ......................................... 107

5.2.1 Main Menu ............................................................... 108

5.3 Quick Function............................................................... 108

5.3.1 Quick Create ............................................................ 108

5.4 RaidSet Functions .......................................................... 109

5.4.1 Create Raid Set ........................................................ 109

5.4.2 Delete Raid Set ......................................................... 110

5.4.3 Expand Raid Set........................................................ 110

5.4.4 Ofine Raid Set ......................................................... 111

5.4.5 Activate Raid Set....................................................... 111

5.4.6 Create Hot Spare ...................................................... 111

5.4.7 Delete Hot Spare....................................................... 112

5.4.8 Rescue RaidSet ....................................................... 112

5.5 VolumeSet Functions ...................................................... 113

5.5.1 Create Volume Set .................................................... 113

5.5.2 Delete Volume Set..................................................... 116

5.5.3 Modify Volume Set..................................................... 117

5.5.3.1 Volume Expansion ................................................ 117

5.5.3.2 Volume Set Migration ............................................ 117

5.5.4 Check Volume Set ..................................................... 118

5.5.5 Stop Volume Set Check .............................................. 118

5.6 Physical Drive ............................................................... 118

5.6.1 Create Pass Through ................................................. 118

5.6.2 Modify Pass Through .................................................. 119

5.6.3 Delete Pass Through Disk ........................................... 119

5.6.4 Identify Drive ........................................................... 120

5.7 System Controls ............................................................ 120

5.7.1 System Conguration................................................. 120

5.7.2 EtherNet Cong ........................................................ 125

5.7.3 Alert By Mail Cong .................................................. 126

5.7.4 SNMP Conguration .................................................. 127

• SNMP Trap Congurations .............................................. 127

• SNMP System Congurations .......................................... 127

• SNMP Trap Notication Congurations.............................. 127

5.7.5 NTP Conguration (Ethernet Port Support).................... 128

5.7.6 View Events/Mute Beeper ........................................... 129

5.7.7 Generate Test Event .................................................. 130

5.7.8 Clear Events Buffer.................................................... 130

5.7.9 Modify Password ....................................................... 130

5.7.10 Upgrade Firmware ................................................... 131

5.7.11 Shutdown Controller ................................................ 131

5.7.12 Restart Controller ................................................... 131

5.8 Information Menu .......................................................... 132

5.8.1 RaidSet Hierarchy...................................................... 132

5.8.2 System Information................................................... 132

5.8.3 Hardware Monitor...................................................... 133

Appendix A .................................................................. 134

Upgrading Flash Firmware Programming Utility ........................ 134

Establishing the Connection for the RS-232............................. 134

Upgrade Firmware Through ANSI/VT-100 Terminal Emulation .... 135

Upgrade Firmware Through Web Browser Manager (LAN Port) ... 137

Appendix B .................................................................. 139

SNMP Operation & Denition ................................................. 139

Appendix C .................................................................. 141

Technical Support ................................................................ 141

Appendix D.................................................................. 142

Event Notication Congurations ......................................... 142

A. Device Event............................................................... 142

B. Volume Event.............................................................. 143

C. RAID Set Event ........................................................... 144

D. Hardware Monitor Event ............................................... 144

Appendix E .................................................................. 146

RAID Concept ..................................................................... 146

RAID Set .......................................................................... 146

Volume Set....................................................................... 146

Ease of Use Features.......................................................... 147

• Foreground Availability/Background Initialization ............... 147

• Online Array Roaming .................................................... 147

• Online Capacity Expansion.............................................. 147

• Online Volume Expansion ............................................... 150

High availability................................................................... 150

• Global Hot Spares ........................................................... 150

• Hot-Swap Disk Drive Support............................................ 151

• Auto Declare Hot-Spare .................................................. 151

• Auto Rebuilding ............................................................. 152

• Adjustable Rebuild Priority................................................ 152

High Reliability .................................................................... 153

• Hard Drive Failure Prediction............................................. 153

• Auto Reassign Sector....................................................... 153

• Consistency Check .......................................................... 154

Data Protection ................................................................... 154

• Recovery ROM ................................................................ 154

Appendix F .................................................................. 156

Understanding RAID ........................................................... 156

RAID 0............................................................................. 156

RAID 1............................................................................. 157

RAID 10(1E) ..................................................................... 158

RAID 3............................................................................. 158

RAID 5............................................................................. 159

RAID 6............................................................................. 160

JBOD ............................................................................... 160

Single Disk (Pass-Through Disk) .......................................... 160

INTRODUCTION

1. Introduction

The EliteRAID RAID Storage Subsystem is a high-performance SATA ll

drive bus disk array controller. When properly congured, the RAID

conntroller can provide non-stop service with a high degree of fault

tolerance through the use of RAID technology and advanced array

management features. The RAID controller unleashes a truly innova-

tive eSATA (3.0Gbps)/USB2.0 solution for use with your PC and Mac.

The HOST interface on the host may be located either on the system

board, or on a plug-in host bus adapter (HBA) card. With the host

SATA controller supported port multiplier function, eSATA host chan-

nel can support multiple volumes (up to 8) per channel. USB2.0 host

channel can also support up to 16 volumes. Up to 16 volumes can be

created on each EliteRAID RAID Storage Subsystem.

The RAID conntroller allows easy scalability from JBOD to RAID. It can

be congured to RAID levels 0, 1, 10, 1E, 3, 5, 6, Single Disk or JBOD.

The RAID function allows one HDD failure without impact on the exist-

ing data and failed drive data can be reconstructed from the remaining

data and parity drives. RAID conguration and monitoring can be done

through the rear LCD control panel, serial port or LAN port. The con-

troller unit is most cost-effective SATA disk drive RAID conntroller with

completely integrated high-performance and data-protection capabili-

ties, which meet the performance and features of a midrange storage

product at an entry-level price.

1.1 System Architecture

1.1.1 eSATA/USB 2.0 Host Interface

The EliteRAID RAID Subsystem host interface appears to the host

system as a SATA ll or UBS2.0 target device. Your EliteRAID RAID

subsytem uses the latest eSATA technology, allowing interface

(or bus) transfer rates of up to 3.0Gbps. The eSATA was device

Autres manuels pour ER208UT+B

Table des matières

Autres manuels Sans Digital Stockage

Sans Digital

Sans Digital EliteSTOR ES316X12HP Manuel utilisateur

Sans Digital

Sans Digital ELITERAID ER316FD+B Manuel utilisateur

Sans Digital

Sans Digital TOWERRAID TR5UT+(B) Manuel utilisateur

Sans Digital

Sans Digital TOWERRAID TR8UT+(B) Manuel utilisateur

Sans Digital

Sans Digital MOBILESTOR MS4UM+(B) Manuel utilisateur

Sans Digital

Sans Digital TOWERRAID TR5UT+(B) Manuel d'utilisation et d'entretien

Sans Digital

Sans Digital TOWERRAID TR8U-B Manuel utilisateur

Sans Digital

Sans Digital MOBILESTOR MS1UT Manuel utilisateur

Sans Digital

Sans Digital EliteSTOR ES424X12 Manuel utilisateur

Sans Digital

Sans Digital ES208X6+B Manuel utilisateur

Sans Digital

Sans Digital ER208UT+B Manuel utilisateur

Sans Digital

Sans Digital MOBILESTOR MS2UT+(B) Manuel utilisateur

Sans Digital

Sans Digital Towerraid TR4UT-B Manuel d'utilisation et d'entretien

Sans Digital

Sans Digital TowerRaid TR4M6G Manuel utilisateur

Sans Digital

Sans Digital TowerRAID TR5UT+ Manuel utilisateur

Sans Digital

Sans Digital ES424X6+BHP Manuel utilisateur

Sans Digital

Sans Digital Towerraid 6G series Manuel d'utilisation et d'entretien

Sans Digital

Sans Digital MOBILESTOR MS4UT+(B) Manuel utilisateur

Sans Digital

Sans Digital TOWERRAID TR5M1 Manuel d'utilisation et d'entretien

Sans Digital

Sans Digital TOWERSTOR TS2UT Manuel utilisateur

Sans Digital

Sans Digital Accustor AS424X6S Manuel utilisateur

Sans Digital

Sans Digital EliteSTOR ES208X12 Manuel utilisateur

Sans Digital

Sans Digital iSCSI STORAGE Manuel utilisateur

Sans Digital

Sans Digital ACCUSTOR AS212X6 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur