Samsung SHC-735 Manuel utilisateur

Supreme Resolution WDR Camera SHC-735 User’s Manual

Thank you for purchasing a SAMSUNG CCD CAMERA.

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

ENGLISH

www.samsungtechwin.com

www.samsungcctv.com

•SAMSUNG TECHWIN CO.,LTD.

145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea

TEL : +82-31-740-8151~8 FAX : +82-31-740-8145

•SAMSUNG OPTO-ELECTRONICS UK,LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business

Park Chertsey Surrey KT16 OPS

TEL : +44-1932-45-5308 FAX : +44-1932-45-5325

•SAMSUNG TECHWIN AMERICA,LTD.

1480 Charles Willard St. Carson, CA 90746, UNITED STATES

TEL : +1-310-632-1234 FAX : +1-310-632-2195

SALES NETWORK

P/No. : Z6806-0828-01F

VAN 08. 10

This installation should be made by a qualified service person and

should conform to all local codes.

The lightning flash with an arrowhead symbol, within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

Precautions

Do not install under extreme

temperature conditions.

Use only under temperature conditions

between -10˚C and +50˚C. Provide good

ventilation when using in high temperature

conditions.

Do not install in high humidity

environment.

May lower image quality.

Do not install under unstable

lighting conditions.

Severe lighting changes or flickering may

hinder normal camera operation.

Avoid touching the camera lens.

The lens is the most important component

of the camera. Be careful not to smear it

with fingerprints.

Do not drop the camera or

subject it to physical shock.

May cause a product malfunction.

Never keep the camera face to

strong light directly.

May damage the CCD.

Do not expose the camera to

radioactivity.

Radioactivity exposure may damage the

CCD.

Do not expose the camera to

rain or other types of liquids.

Wipe dry any liquids. Liquids may contain

minerals that are corrosive to electronic

components.

• Exposure to a spotlight or an object emitting strong light may cause smear or

blooming.

• Ensure that the power source complies with normal specifications before

supplying it to the camera.

Notes

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1110

1. Ultra High Resolution

WDR Color CCD Camera SHC-735

2. Auto Iris Lens Connector Plug

3. C-Mount Adapter

4. Instruction Manual

Front View

OverviewComponents and Accessories

Tripod Mounting Bracket Screw Hole

Used to fix the Tripod Mounting Bracket to the top of the camera.

C-Mount Lens Adapter

Install this adapter to use a C-Mount Lens.

Back Focus Control Lever

Adjust focus by this Back Focus Lever.

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1312

Overview

Bottom View

Side View

Auto Iris Lens Connector

Used to connect Auto Iris Lens plug.

Tripod Mounting Bracket Screw Hole

Used to fix the camera on a bracket or tripod.

The screw sizes for this hole are as follows:

1/4"-20 UNC (20 THREAD)

L:4.5mm±0.2mm (ISO standard),

or 0.197" (ASA standard)

You can separate the Tripod Mounting Bracket and

install it on the top or bottom of the camera.

Make sure to use the Tripod Mounting Bracket when

fixing the camera to a bracket or tripod. Otherwise the

camera may not be secure, or the internal circuitry of

the camera may be damaged.

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1514

The lens is not supplied with this camera. Purchase a lens suitable for your

environment. This camera accepts the auto iris lens and both C-and CS-mount lens.

1. Strip the insulation of the auto iris lens cable 8mm from the end.

2. Strip the insulation of the core of the auto iris lens cable to expose a 2mm length.

When Using Auto Iris Lens

Installation Procedures

Rear View

approx. 8mm

approx. 2mm

Function Setup Button

SET Button : Displays the menu on the screen. Press this button to confirm

status or after changing a selected item.

Up and Down Button : Used to move the cursor up or down in the menu

screen to select a desired menu item.

Left and Right Button : Used to move the cursor left or right in the menu

screen or to change the value of the selected item.

D & N Input Port

You can switch to Day & Night Mode by connecting an external signal to this port.

MD Output Port

Motion detection signals are output through this port.

RS-485 Control Port

You can control SETUP MENU through this port by using external controllers like a

Remote controller that RS-485 Communication is supported. For details, see page 21.

Video OUT Port

Video signals are output through this port. Connect this port to the Video IN port of a monitor.

Power LED

When power is properly connected, this LED comes on.

Power IN Port

Connect the power as specified for each model here.

Overview

Lens

• It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major

functions of this camera.

• Keep the lens surface clean, since if it is contaminated with dirt or fingerprints the

picture quality suffers.

Notes

*High Voltage Type

(SHC-735PH)

• Use the lens connector shown in the following figure. If the dimensions of the

connector are not correct, it may damage the camera, or the lens may not be

installed firmly.

• If the lens is too heavy, the camera becomes unbalanced and there may be

problems. Use a lens that weighs less than 450g.

• When adjusting the Automatic Level Control (ALC) of an auto iris lens, use Av

mode if available. If you use the Pk mode, the picture brightness may change

continuously.

Notes

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1716

Installation Procedures

Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount.

This camera is set for a CS-Mount Lens by default. To install a C-Mount Lens, a

simple modification is required.

• When Using a CS Mount Lens

Remove the protective glass cover at the front of this product and turn the CS-

Mount Lens clockwise to install it. And set focus of camera using Back Focus

Control Lever of camera side after combining CS-Mount lens.

When Using C/CS Mount Lens

C-Mount Lens: 10mm or less

CS-Mount Lens: 5mm or less

3. Remove the cover of the auto iris lens connector plug and solder the lens cable to

the connector pin of the plug.

4. Fit the cover of the auto iris lens connector

plug, remove the protective glass cover

from the front of the camera, and fasten

the auto iris lens by turning it clockwise.

• For a Video Drive Lens

Pin 1: Red (Power)

Pin 2: NC

Pin 3: White (Video Signal)

Pin 4: Black (Ground)

• For a DC Drive Lens

Pin 1: Damping -

Pin 2: Damping +

Pin 3: Drive +

Pin 4: Drive -

5. Set focus of camera using Back Focus Control

Lever of camera side after combining Auto

Iris lens.

Back Focus Control Lever

No. 3 Pin

No. 1 Pin

connector

Lens cable

No. 4 Pin

No. 2 Pin

COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual

1918

Connect the Video OUT port on the rear panel of the camera to a monitor.

• Make sure to turn off the device to be connected before making any connections.

• Turn the 75 /Hi-Z switches of interim display devices to the Hi-Z position, and

the switches of any final device to the 75Ωposition.

• Since the connection procedure may differ depending on the type of monitor or

peripheral device to be connected, refer to the User Manual for the device to be

connected.

CCD Camera

Intermediate End monitor

Monitor

• When Using a C Mount Lens

1. Remove the protective glass cover at the front

of this product and turn the C-Mount Adapter

clockwise to install it.

2. Turn the C-Mount lens clockwise to install it.

3. Set focus of camera using Back Focus Control Lever of camera side after combining

C-Mount lens.

Installation Procedures

Connecting a Monitor

Connecting Power

Since power specifications differ depending on the model, make sure to check your

model name and specifications before connecting power. You can connect power as

shown in the following figure.

For AC / DC power

High Voltage Type (AC230V, 50Hz)

• Since the power specification supports

both AC and DC, connect AC 24V,

500mA Adaptor or DC 12V, 500mA

Adaptor.

• Use AC230V, 50Hz power source For

SHC-735PH.

Autres manuels pour SHC-735

Table des matières

Autres manuels Samsung Caméra de sécurité

Samsung

Samsung SCC-130B Manuel utilisateur

Samsung

Samsung COMPACT SPD-1000 Manuel utilisateur

Samsung

Samsung iPolis SNV-7082 Manuel utilisateur

Samsung

Samsung SVD4600 Series Manuel utilisateur

Samsung

Samsung iPolis SNP-3302 Manuel utilisateur

Samsung

Samsung SCD-2022R Manuel utilisateur

Samsung

Samsung iPolis SND-5011 Manuel

Samsung

Samsung SNC-C7478 Manuel utilisateur

Samsung

Samsung iPolis SND-460V Manuel utilisateur

Samsung

Samsung SDC-415 Series Manuel utilisateur

Samsung

Samsung SCC-B5396 Manuel utilisateur

Samsung

Samsung SCC-B9374 Manuel utilisateur

Samsung

Samsung SCD-3081 Manuel utilisateur

Samsung

Samsung SHR-6082 Manuel utilisateur

Samsung

Samsung SCD-2010 Manuel utilisateur

Samsung

Samsung SCD-2010F Series Manuel utilisateur

Samsung

Samsung SNO-7082R Manuel utilisateur

Samsung

Samsung SCC-B531xBN Manuel utilisateur

Samsung

Samsung SNH-V6430BNH Manuel utilisateur

Samsung

Samsung SCP-3120 Manuel utilisateur

Samsung

Samsung SVD-4400 Manuel utilisateur

Samsung

Samsung SND-6084R Manuel utilisateur

Samsung

Samsung SNP-6320 Manuel utilisateur

Samsung

Samsung SRD-1650DC Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur