Samsung SP-P300ME Manuel utilisateur

| Power Related | Installation Related | Cleaning and Use Related |

To avoid injuries or damage to property, please read the following precautions carefully and use the

product accordingly.

Failure to follow the instructions marked with this symbol may cause personal injury or even fatality.

Failure to follow the instructions marked with this symbol, may cause personal injury or damage to

the product or property.

Be sure to plug the plug in tightly as failing to do so may cause fire.

zWhen the connection is incomplete, it may cause fire.

Do not use loose power outlets or damaged power cables.

zThere is a danger of electric shock or fire.

Under no circumstances touch the power plug with wet hands.

zThere is a danger of electric shock.

Do not plug multiple appliances into a single wall outlet.

zThere is a danger of fire.

Do not place heavy objects on the power cord. Avoid bending, pulling or twisting the

power cord.

zThere is a danger of electric shock or fire.

Before moving the product, make sure that the power is off and remove the power

cord from the wall outlet. In addition, make sure that all connection cables are

disconnected from other devices before moving it.

zMoving the product without disconnecting the power cord may damage the

power cord and may cause fire or electric shock.

Always unplug the unit by holding the power plug and not the power cable.

zThere is a danger of fire.

Unplug the power plug before cleaning the product.

zThere is a danger of electric shock or fire.

Do not let water or any liquid come into contact with the adapter.

zThis may cause fire or electric shock.

zAvoid using the product near liquids or outdoors (i.e. rain, snow).

zEnsure that the adapter is not exposed to wetness when cleaning the floor

with water.

Do not plug in two power adapters next to each other.

zThere is a danger of fire.

Keep the adapter away from heaters.

zThere is a danger of fire.

Strip the adapter of the plastic packaging before use.

zThere is a danger of fire.

Keep the adapter in a well-ventilated location.

| Power Related | Installation Related | Cleaning and Use Related |

Do not place candles, mosquito sticks, cigarettes, etc. over the product.

zThere is a danger of fire.

When installing the product in a cabinet or on a shelf, do not let the front part of the

product project out of the cabinet or shelf.

zA falling product may damage the product or cause injury.

Keep the power cord away from heaters.

zThe coating of the power cord may melt and cause electric shock or fire.

Do not install the product in locations exposed to oil, smoke, moisture or water

(rainwater), or in a vehicle.

zThere is a danger of electric shock or fire.

Do not install the product in locations without ventilation such as a bookshelf or a

wall closet.

zThis may cause fire or damage to the product.

Do not install to an unstable location, for example on a stand that is smaller than the

product.

zIf the product falls it may injure children or become damaged. Install on a

stable location as the front section is heavy.

In case of lightning, immediately turn the system off and disconnect the power cord

from the wall outlet.

zThere is a danger of electric shock or fire.

Make sure the product's vents are not blocked by a tablecloth or curtain.

zThis may cause fire or damage the product.

Place the product on the ground carefully.

zFailing to do so may cause damage or injury.

Do not drop the product while moving it.

zFailing to do so may cause damage or injury.

Keep the product out of children’s reach.

zA falling product may cause harm to children. Since the front part of the

product is heavier than the back part, install the product on a flat and

stable location.

| Power Related | Installation Related | Cleaning and Use Related |

To not insert any metal such as chopsticks, wires, gimlets, or inflammable

substances such as paper and matches into the vents of the product or the AV

ports.

zThere is a danger of electric shock or fire.

If water or an alien substance gets into the product, turn the product off,

disconnect the power cord from a wall outlet and contact a Service Center.

Do not disassemble, or attempt to fix or modify the product.

zWhen the product requires repairs, contact a Service Center.

There is a danger of electric shock or damage to the product.

Keep the product away from inflammable sprays or other such substances.

zThere is a danger of fire or explosion.

Do not place containers with water, vases, drinks, chemicals, small metal parts or

heavy objects on the product.

zIf any object or liquid gets into the product, it may cause electric shock, fire

or personal injury.

Do not allow any children to place objects such as toys or cookies on the product.

zIf a child tries to reach for any of these objects, the product may fall and

injure the child.

Never look directly at the light of the lamp at the front of the product and never

project the picture onto eyes.

zThis is dangerous especially for children.

If the product emits smoke, unusual noise, or there is a burning smell, turn the

system off immediately, disconnect the power plug from the wall outlet, and contact

a Service Center.

zThere is a danger of electric shock or fire.

If the power plug pin or jack is exposed to dust, water or alien substances, clean it.

zThere is a danger of electric shock or fire.

Ask a Customer Center or Service Center to internally clean the product at least once

a year.

zIf the dust within the product is not cleaned over a long time, it may cause a

problem with the product or even fire.

Clean the product lightly using a soft dry cloth or towel after disconnecting the

power cord from the wall outlet.

zDo not clean the product using chemicals such as wax, benzene, alcohol,

paint thinners, mosquito repellant, aromatics, lubricant, cleansing solutions,

etc.

For long periods where the product is not being used, disconnect the power plug.

zThere is a danger of electric shock or fire.

Be sure to contact an authorized Service Center when installing your set in a location

with heavy dust, high or low temperatures, high humidity, and chemical substances,

or where it will be operated for 24 hours continuously such as an airport, train station

or etc.

zFailure to do so may cause serious damage to your set.

When the product is dropped or its case is broken, turn the product off and plug out

the power plug, as this may cause electric shock or fire.

zIn this case, contact a Service Center.

Take care not to lose the lens cover of the product.

zFailing to use the lens without the lens cover, may damage the lens.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment) - Europe only

(Applicable in the European Union and other European countries with

separate collection systems)

This marking shown on the product or its literature, indicates that it should not

be disposed with other household wastes at the end of its working life. To

prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they

can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and

conditions of the purchase contract. This product should not be mixed with

other commercial wastes for disposal.

A custom made new projector designed for important marketing activities and presentations of the active business man!

The Portable Projector SP-P300ME provides high mobility and ease of use at a reasonable price.

The New Concept Projector for High Mobility

- Small Size.

- Lightweight.

A Battery Pack that Enables Projections without Connecting a Power

Cord

(For more information about the battery, refer to the battery description.)

- The Projector is operable with a charged battery.

- You can enjoy wide screen viewing without connecting the power cord.

Next Generation Backlight Light Source, LED Lamp

- Effective energy saving through the use of low voltage.

- Semi-permanent long lifetime guaranteed.

Your Projector

1. Power Button[]

To turn it on

Press the Power button. The Power LED will light

up and the power is turned on.

To turn it off

Press the Power button until the Power LED is

turned off.

2. Menu Button[]

Press to display the OSD menu.

This is also used to exit the OSD or to return

to a higher level of the OSD menu.

3. Adjustment Button[]

Press to move the OSD menu or to adjust a

value on the OSD menu screen.

4. Enter Button []/ SOURCE Button

Press to select an OSD menu.

When pressing the 'SOURCE' button when

the menu screen is not displayed the input

source (PC, Composite)is switched.

5. SERVICE

The SERVICE terminal is used for after-sales

services.

6. PC/COMPOSITE

To connect a PC or VCR, the PC/Composite

cable must be connected here.

7. POWER LED

If you turn the projector on, the Power LED

lights up and if you turn it off, the Power LED

turns off accordingly.

8. TEMP LED

This lights up when the product is out of order.

Refer to the Status of the Operating LEDs.

9. Power Port[]

To supply power, the power adapter must be

connected.

10.Lens

11.Focus Ring

Move it to the left or right to sharpen the image.

12.Battery Port

Install the battery into the battery port.

(For more information about the battery, refer to

the battery description.)

Accessories

Table des matières

Autres manuels Samsung Projecteur

Samsung

Samsung SP-LFF3CLAXXZA Mode d’emploi

Samsung

Samsung SP-D400 Manuel utilisateur

Samsung

Samsung The Premiere LSP7T Manuel utilisateur

Samsung

Samsung BP59-00136C-02 Manuel utilisateur

Samsung

Samsung SP-P310ME Manuel utilisateur

Samsung

Samsung D300 (Electra) Manuel utilisateur

Samsung

Samsung SDP-900DXA Manuel utilisateur

Samsung

Samsung SP-L300 Manuel utilisateur

Samsung

Samsung SP-M220W Manuel utilisateur

Samsung

Samsung The Premiere LSP7T Manuel utilisateur

Samsung

Samsung SP-A900B Manuel utilisateur

Samsung

Samsung The Premiere LSP7T Manuel utilisateur

Samsung

Samsung BP59-00143A-04 Manuel utilisateur

Samsung

Samsung SP-LFF3CLAX Manuel utilisateur

Samsung

Samsung SP-A400B Manuel utilisateur

Samsung

Samsung The Freestyle Manuel utilisateur

Samsung

Samsung BP59-00092H-05 Manuel utilisateur

Samsung

Samsung SP-L300 Manuel utilisateur

Samsung

Samsung SP-F10 Manuel utilisateur

Samsung

Samsung SP-M255 Guide de configuration

Samsung

Samsung SP-LSP7TFA Manuel utilisateur

Samsung

Samsung SP-P400B Manuel utilisateur

Samsung

Samsung SPI-10 Manuel utilisateur

Samsung

Samsung SP-D300B Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur