Salus ERT50 Manuel utilisateur
Instruction Manual
Model No
ERT50 230v
ERT50 230v
Digital Room Thermostat
for Underfloor
Heating Applications
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 1
ERT50 230v INSTRUCTION MANUAL
2
PRODUCT COMPLIANCE
This product complies with the essential
requirements of the following EC Directives:
•Electro-Magnetic Compatibility
directive 2004/108/EC
•Low Voltage Directive 2006/95/EEC
•EC Marking directive 93/68/EEC
SAFETY INFORMATION
These instructions are applicable to the Salus
Controls model stated on the front cover of this
manual only, and must not be used with any other
make or model.
These instructions are intended to apply in the
United Kingdom only, and should be followed along
with any other statutory obligations.
This accessory must be fitted by a Competent
person, and installation must comply with the
guidance provided in the current editions of BS7671
(IEE Wiring Regulations) and Part ‘P’ of the Building
Regulations. Failure to comply with the
requirements of these publications could lead to
prosecution.
Always isolate the AC Mains supply before
opening or removing the unit from the wall or
wall box.
Please leave these instructions with the end user
where they should be kept in a safe place for future
reference.
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 2
ERT50 230v INSTRUCTION MANUAL 3
INTRODUCTION
A programmable thermostat is a device that combines the
functions of both a room thermostat and heating
controller into a single unit. The programmable
thermostat is used to switch the heating system in your
home on and off as needed. It works by controlling the
temperature according to a series of programmed settings
that take effect at different times of the day.
The ERT50 230v from Salus Controls is a stylish and
accurate digital room thermostat that is fitted with a large
easy to read Liquid Crystal Display (LCD). The ERT50 230v
benefits from simple one-touch operation, and this
controller has been specifically designed to be used with
underfloor heating systems.
Features
•12/24 Hour Clock with Daylight Saving feature
•Key lock Function
•3 Preset and 2 User Profiles
•Comfort/Standard/Reduced Temperature Zones
•Night Setback
•8 different languages selection
•Auto/Manual Mode
•PWM or On/Off Output
•Heat/Cool selection
•Holiday Function
•Frost Protection
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 3
INSTALLATION
Please read the important safety information at the start
of this manual before you begin to install the device.
The ideal position to locate the ERT50 230v digital room
thermostat is about 1.5m above floor level. It should be
mounted in a location where the thermostat is easily
accessible, reasonably lit and free from extremes of
temperature. The electrical connections to the ERT50
230v are made to the internal terminal strip. Connection
details are shown below - no Earth connection is required
for the correct and safe operation of the thermostat as the
device is double insulated.
After installing the ERT50 230v in a suitable location, wiring
connections can be made as shown above. The following
criteria apply to the installation:
• The incoming AC mains supply should be 230v AC
and fused at 2 amps.
• Optimum cable size for installation is 1.5 mm2; wiring
colours should be in accordance with the current
requirements of the IEE Wiring Regulations.
• All wiring connections should be securely made, and be
firmly terminated within each of the terminal screw clamps.
Do not restore the mains supply to the system until all
associated items are fully installed.
ERT50 230v INSTRUCTION MANUAL
4
TERMINAL CONNECTIONS
Take the wiring only in accordance
with the wiring diagram below:
230v Version
Connection
L2 Line 2
Supply reduction
Switching output
L1 Line 1
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 4
NOTE: All electrical installation work should be carried out by a
suitably qualified Electrician or other competent person. If you
are not sure how to install this programmable thermostat consult
either with a qualified electrician, heating engineer or your boiler
/ heating system supplier for advice on how to continue.
Do not remove or refit the ERT50 230v wiring without
the mains supply to the system being isolated.
SYSTEM INITIAL
After connecting 230v or pressing reset button, please select
the Language, Date and Time. The installed firmware version
will be displayed, the backlight will turn on and then the Start
Up display will be shown prompting you to select the
Language and to set the Date and Time.
Press + or - to select language then press Select buttons to
confirm language Remark: The default is English.
LCD prompts user to select Date, time and Daylight Saving.
Press + or - to change the value of Date, 24/12hr, Time and
Daylight Saving. Press Select buttons to next setting values.
Remark: DD/MM/YY is different for the different language.
Basic Settings
Many of the ERT50 230v configuration and operating
settings can be changed here. Press any key to turn on the
backlight, press CANCEL key, press and hold the SELECT
and CANCEL keys together to enter program setting press
+ or - key to "Basic Setting", and press SELECT.
To change any of the basic settings, press the SELECT this
will access the Program/Basic settings menu.
ERT50 230v INSTRUCTION MANUAL 5
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 5
ERT50 230v INSTRUCTION MANUAL
6
Use the PLUS (+) or MINUS (-) keys to choose the item you
want to change and press the SELECT key to change to the
setting menu for that item. Pressing the CANCEL key will
exit from this menu and return you to the previous menu.
DATE AND TIME:
Press the PLUS or MINUS key to change the day setting,
then SELECT to save your choice. Do exactly the same for
the month and year. You can then choose whether to use
a 12 or 24 hour time display (the default is 24 hour).
The time is set in the same way as the date – use the
PLUS or MINUS keys to change the setting, and save
by pressing SELECT.
The last menu item is Daylight Saving – by default this is
turned on. Change the setting using the PLUS or MINUS keys,
then press the SELECT key to save the settings and return to
the Program/Basic settings menu.
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 6
LANGUAGE:
The ERT50 230v is programmed to operate in eight
different languages (the default is English). If you wish to
change the language used, select Language from the
Program/Basic Settings screen.
Select your choice of language with the PLUS or MINUS
keys, then press SELECT to save your choice and return to
the Program/Basic Settings screen.
Pressing CANCEL will return to the previous screen
without saving any changes.
MAINTENANCE:
The Maintenance menu allows you to view operating
times for the heating system. The ERT50 230v will record
operating time up to a maximum of 99,999 hours.
ERT50 230v INSTRUCTION MANUAL 7
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 7
ERT50 230v INSTRUCTION MANUAL
8
Select the Read Operating Time entry to see a summary of
the system operating times.
This screen will show the date the operating times were
last reset, total operating time and total actuator open
time.
The timers can be reset by selecting the Reset Operating
Time item
Select Yes and then press the SELECT key to reset the
timers to 0.
Press the CANCEL key to return to the previous menu.
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 8
CONTROL SETTINGS
The Control menu allows changes to the Temperature
Span, Communications, Frost Protection, Output, Valve
Protection and Temperature Offset settings.
To access this menu, select the Control item from the
Program menu.
Temperature Span:
The first setting that can be changed is Temperature Span.
The default setting is 0.5 °C, but this can be changed to
1.0 °C. Press the SELECT key to save your changes.
ERT50 230v INSTRUCTION MANUAL 9
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 9
ERT50 230v INSTRUCTION MANUAL
10
SETBACK FUNCTIONS:
The internal temperature reduction (setback) function
allows you via a hard wired connection to reduce the set
temp of all the remote thermostats (ERT20/ERT30) in your
system at a pre-selected time and duration. The level of
temperature reduction is selected in the ERT50 (via
software) and ERT30 (manually).
Please note that the ERT50 comes to you with the setback
function enabled. If you require this function disabled
please follow the steps below.
The ERT30 requiresthe required temp reduction to be set
by the “jumpers” (show pic) inside the unit.
The temperature reduction for all controls are 2ºC or 4 ºC.
To deactivate NSB enter PROG/CONTROL menu,
press SELECT then using the PLUS or MINUS keys
to select ON/OFF. Press select to save settings.
Salus ERT50 230v Manual 003_89 29/05/2012 15:50 Page 10
Autres manuels pour ERT50
3
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Salus Thermostat
Salus
Salus FT100 Manuel du propriétaire
Salus
Salus ERT30 Manuel utilisateur
Salus
Salus ERT30RT Manuel utilisateur
Salus
Salus RT310SPE Manuel utilisateur
Salus
Salus SQ605RF Manuel utilisateur
Salus
Salus RT500 Manuel utilisateur
Salus
Salus RT510+ Manuel utilisateur
Salus
Salus RXRT505 Manuel utilisateur
Salus
Salus QUANTUM SQ610RF Manuel utilisateur
Salus
Salus HTR-RF(20) Manuel utilisateur
Salus
Salus RT310i Manuel utilisateur
Salus
Salus Quantum SQ610 Manuel utilisateur
Salus
Salus RT520 Manuel utilisateur
Salus
Salus iT500 Manuel utilisateur
Salus
Salus ERT 52 Manuel utilisateur
Salus
Salus RXRT520 Manuel utilisateur
Salus
Salus VS05 Manuel utilisateur
Salus
Salus RT510BC+ Manuel utilisateur
Salus
Salus FC600 Manuel utilisateur
Salus
Salus HTRP230 Guide de l'utilisateur
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
