SainSmart UNO R3 Manuel utilisateur
SainSmart UNO R3 Starter Kit For Arduino
Arduino Introduction
Overview
What is Arduino?
Arduino is a tool for making computers that can sense and control more of the physical world
than your desktop computer. It's an open-source physical computing platform based on a simple
microcontroller board, and a development environment for writing software for the board.
Arduino can be used to develop interactive objects, taking inputs from a variety of switches or
sensors, and controlling a variety of lights, motors, and other physical outputs. Arduino projects
can be stand-alone, or they can be communicated with software running on your computer (e.g.
Flash, Processing, MaxMSP.) The boards can be assembled by hand or purchased preassembled;
the open-source IDE can be downloaded for free.
The Arduino programming language is an implementation of Wiring, a similar physical computing
platform, which is based on the Processing multimedia programming environment.
Feature
Schematic design of the open source development interface free download, and also
according to the needs of their own changes
Download the program is simple and convenient.
Simply with the sensor, a wide range of electronic components connection (such as: LED
light, buzzer, keypad, photoresistor, etc.), make all sorts of interesting things.
Using the high-speed micro-processing controller (ATMEGA328).
The development of language and development environment is very simple, easy to
understand, very suitable for beginners to learn.
Performance
Digital I/O 0~13.
Analog I/O 0~5.( R3 is 0~7 )
Suppor
Input voltage: when connected to the USB without external power supply or external 5 v
output and external power input.
Atmel Atmega328 micro-processing controller. Because of its many supporters, the
company has developed 32-
Arduino size: width of 70 mm X high 54 mm.
Special Port
1. VIN. The input voltage to the Arduino board when it's using an external power source (as
SainSmart UNO R3 Starter Kit For Arduino
opposed to 5 volts from the USB connection or other regulated power source). You can
supply voltage through this pin, or, if supplying voltage via the power jack, access it through
this pin.
2. AREF. Reference voltage for the analog inputs. Used with analogReference().
SainSmart UNO R3
What’s UNO R3?
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital
input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic
resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains
everything needed to support the microcontroller; simply connect it to a computer with a USB
cable or power it with a AC-to-DC adapter or battery to get started.
Performance
Revision 3 is the last SainSmart UNO development board version.
Parameter
3.3V/5V Supply Voltage and IO Voltage can be switched at the same time.
More 3.3V modules supported, such as Xbee module, Bluetooth module, RF module, GPRS
module, GPS module, LCD5110 Backlight and so on, but the original version can only support
5V IO.
Controller uses SMD MEGA328P-AU chip. Add A6/A7 port.
5V Electric current : 500MA
3.3V Electric current : 50MA
Input Voltage: 7-12V
Improvement of R3
Working voltage 3.3V/5V is optional.
Arduino can only work at 5V voltage. When it comes to 3.3V Level module, IO can’t be
connected to it. The Level should be changed, like the SD card, Bluetooth module and so on.
Sainsmart UNO R3 can work at 3.3V voltage by switching on the button. At this time, IO port
is 3.3V and it can work with 3.3V Level module. (R3 can directly use the electronic building
blocks on I / O port and elicit G, V, S)
SainSmart UNO R3 Starter Kit For Arduino
Arduino C Grammar
Arduino grammar is built on the basis of C/C + +, in fact is also the basic C grammar, Arduino
grammar not only put some related parameters Settings are function change, we have no need to
understand his bottom, let us to know AVR micro control unit (MCU) friend can also easy to fit in.
So here I'll simple comment the Arduino grammar.
Control Structures
If
if...else
for
switch case
while
do... while
break
continue
return
goto
Further Syntax
;
{}
//
/* */
Operators
++
--
+=
-=
*=
/=
=
+
-
*
/
%
==
!=
<
>
<=
SainSmart UNO R3 Starter Kit For Arduino
>=
&&
||
!
Data type
boolean
char
byte
int
unsigned int
long
unsigned long
float
double
string
array
void
Constant
HIGH | LOW Said digital IO port level, HIGH Said high level(1), LOW Said low electric
flat(0).
INPUT | OUTPUT Said digital IO port direction, INPUT Said input (high impedance state)
OUTPUT Said output (AVR can provide 5 v voltage and ma current).
TURE | FALSE true(1) , false(0）.
All above are the basic c grammar words and symbols, everybody can understand, and the
specific use can combine experimental procedure.
Structure
void setup()
The setup() function is called when a sketch starts. Use it to initialize variables, pin modes, start
using libraries, etc. The setup function will only run once, after each power up or reset of the
Arduino board.
void loop()
After creating a setup() function, which initializes and sets the initial values, the loop() function
does precisely what its name suggests, and loops consecutively, allowing your program to change
and respond. Use it to actively control the Arduino board.
Function
Digital I/O
pinMode(pin, mode) pin 0~13, mode is input or output.
digitalWrite(pin, value) pin 0~13, value is HIGH or LOW.
int digitalRead(pin) pin 0~13, value is HIGH or LOW.
SainSmart UNO R3 Starter Kit For Arduino
Analog I/O
int analogRead(pin) pin 0~5.
analogWrite(pin, value) pin 3, 5, 6, 9, 10, 11, value is 0 to 255
Time
delay(ms)Pauses the program for the amount of time (in miliseconds) specified as parameter.
(There are 1000 milliseconds in a second.)(unit ms).
delayMicroseconds(us)
Math
min(x, y) minimum value
max(x, y) maximum value
abs(x) absolute value
constrain(x, a, b) Constraint function, lower limit a upper limit b, x must be between a & b to be
returned
map(value, fromLow, fromHigh, toLow, toHigh)
pow(base, exponent) extraction of square root
sq(x) square
sqrt(x) Square root
SainSmart UNO R3 Starter Kit For Arduino
Chapter 1 Hello World!
In this chapter, we will learn use Arduino IDE serial interface tools to show the contents that we
want to display in the computer.
Example code:
void setup()
{
Serial.begin(9600);// opens serial port, sets data rate to 9600 bps
Serial.println("Hello World!");
}
void loop()
{
}
Explain:
Serial.begin(9600); The comment says 9600 bps, and just so you know bps stands for
bits-per-second (we will refer to this as the baud rate). Communicate with computer, you may
choose these rate “300, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200”.
Operation:
1) Download code to arduino.
2) After download, click “tool”, pick up relevant arduino board, and relevant com. Then click
“serial Monitor”, on the new open up window’s bottom right, choose the relevant rate.
SainSmart UNO R3 Starter Kit For Arduino
SainSmart UNO R3 Starter Kit For Arduino
Chapter 2 Blink LED
Small LED lamp experiment is the basis of comparison of the experimental one, this time we use
the motherboard comes with 13 feet of LED lights to complete the experiment, the experimental
equipment we need is the Arduino which each experiment must have and USB download cable.
Next we connect small lamp in accordance with the following experimental schematic physical
map.
Accordance with the good circuit after the link above figure, you can start writing programs, and
we let the small LED lights flashing. Lighting on for one second and off for one second. This
program is very simple. This is Arduino own routines Blink.
Example code:
ｉｎｔ ｌｅｄＰｉｎ ＝１３； ／／define pin 13
ｖｏｉｄ ｓｅｔｕｐ（）
｛
SainSmart UNO R3 Starter Kit For Arduino
ｐｉｎＭｏｄｅ（ｌｅｄＰｉｎ， ＯＵＴＰＵＴ）；／／define interface is output
｝
ｖｏｉｄ ｌｏｏｐ（）
｛
ｄｉｇｉｔａｌＷｒｉｔｅ（ｌｅｄＰｉｎ， ＨＩＧＨ）； ／／light up led lamp
ｄｅｌａｙ（１０００）； ／／delay 1s
ｄｉｇｉｔａｌＷｒｉｔｅ（ｌｅｄＰｉｎ， ＬＯＷ）； ／／go out led lamp
ｄｅｌａｙ（１０００）； ／／ delay 1s
｝
After downloading the program, you can see our 13-foot LED lights flashing, so that our small
lights flicker experiment is complete.
SainSmart UNO R3 Starter Kit For Arduino
Chapter3 LED Blink
light emitting diode
What’s light emitting diode?
The light emitting diode referred to as LED. By gallium (Ga) and arsenic (AS) and phosphorus (P)
made of a compound of the diode, when the electron and hole recombination can radiate visible
light, and thus can be used to prepare a light-emitting diode in the circuit and the instrument as
the indicator, or the composition of the text or digital display. Ga As P diode hair red, gallium
phosphide diode green silicon carbide diode yellow.
A flashing LED lights experiment
Experiment component
LED lamp : 1
220Ω resistor : 1
Breadboard & Jumper wires
Connect your circuit as the below diagram
Autres manuels pour UNO R3
1
Table des matières
Autres manuels SainSmart Carte mère
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
