Sailor H2095C Manuel utilisateur
Sailor H2095C (TT-3020C) Inmarsat-C Terminal
Installation Manual
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 388 of 1234
Table of Tables
Table of TablesTable of Tables
Table of Tables
25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00 Page
PagePage
Page v
vv
v
Table of Tables
Table 1 TT-3020C technical specifications................................................... 2-2
Table 2 Inmarsat-C Protocol support. .......................................................... 2-3
Table 3 TT-3020C power requirements ....................................................... 2-4
Table 4 TT-3020C Capsat Transceiver ON/OFF overview ........................... 2-5
Table 5 TT-3020C Capsat Transceiver DC Power Connector pin
assignment .................................................................................................. 2-8
Table 6 Automatic baudrate settings ........................................................... 2-9
Table 7 TT-3020C X3 pin assignment......................................................... 2-10
Table 8 TT-3020C X4 pin assignment......................................................... 2-12
Table 9 Printer port (X5) pin assignment ................................................... 2-16
Table 10 GPS Specifications ...................................................................... 2-18
Table 11 Capsat System component power requirements........................... 3-2
Table 12 Capsat System Fuses..................................................................... 3-3
Table 13 Compass Safe Distance ................................................................. 3-4
Table 14 TT-3005M technical specifications. ............................................... 3-7
Table 15 TT-3020C Capsat Transceiver Antenna Cable types (TNC -
TNC) for TT-3005M. ..................................................................................... 3-8
Table 16 TT-3005A technical specifications. .............................................. 3-12
Table 17 TT-3020C Capsat Transceiver Antenna Cable types (TNC -
TNC) for TT-3005A antenna. ...................................................................... 3-13
Table 18 TT-3001B opt. 001 Technical Specifications................................. 3-16
Table 19 TT-3020C Capsat Transceiver Antenna Cable types (N - TNC)
for TT-3001B opt. 001................................................................................. 3-17
Table 20 Radiated intensity ....................................................................... 3-22
Table 21 TT-3606E Power Connector......................................................... 3-24
Table 22 TT-3606E Message Terminal Specifications ................................ 3-26
Table 23 TT-3608G DIP switch settings...................................................... 3-37
Table 24 TT-3608G Power Connector........................................................ 3-38
Table 25 TT-3608G I/O Connector............................................................. 3-39
Table 26 TT-3608G Technical Specifications.............................................. 3-41
Table 27 TT-3042C and Satellite Communication Unit inter-connection .... 3-43
Table 28 TT-3042C Technical Specifications.............................................. 3-44
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 397 of 1234
Table of Tables
Table of TablesTable of Tables
Table of Tables
Page
PagePage
Page vi
vivi
vi 25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00
Table 29 TT-3042D DIP switch settings.......................................................3-51
Table 30 TT-3042D Power Connector.........................................................3-52
Table 31 TT-3042D I/O Connector..............................................................3-53
Table 32 TT-3042D Technical Specifications ..............................................3-55
Table 33 Antenna voltage configuration.......................................................4-4
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 398 of 1234
Initial Inspection
Initial InspectionInitial Inspection
Initial Inspection Introduction
IntroductionIntroduction
Introduction
25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00 Page
PagePage
Page 1-1
1-11-1
1-1
1 Introduction
This manual provides instructions for installing, configuring and
testing of a TT-3000C Integrated Capsat System that includes a
TT-3020C Capsat Transceiver.
A wide variety of options and accessories may be linked together
with the Capsat Transceiver, the specific installation and config-
uring of these are to be found in their respective Reference
Manuals.
Figure 1 TT-3020C Maritime Capsat Transceiver
1.1 Initial Inspection
WARNING
WARNINGWARNING
WARNING
To avoid hazardous electrical shock, do not perform electrical
tests if there is any sign of shipping damage to any portion of
the front or rear panel or the outer cover. Read the safety
summary at the front of this manual before installing or
operating the TT-3020C Transceiver.
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 399 of 1234
Introduction
IntroductionIntroduction
Introduction Storage
StorageStorage
Storage
Page
PagePage
Page 1-2
1-21-2
1-2 25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00
Inspect the shipping carton immediately upon receipt for evi-
dence of mishandling during the transit. If the shipping carton is
severely damaged or water stained, request that the carrier's
agent be present when opening the carton. Save the carton
packing material for future use.
Contents of the shipment should be as listed in the enclosed
packing list. If the contents are incomplete, if there is mechanical
damage or defect, or if the TT-3020C Capsat Transceiver does not
work properly, notify your dealer.
After you unpack the TT-3020C Capsat Transceiver, inspect it
thoroughly for hidden damage and loose components or fittings.
Inspect the cable harness for stress, loose or broken wires, or
broken cable tires.
Examine all the components for loose or missing hardware.
Tighten all loose hardware.
1.2 Storage
The TT-3020C may be stored or shipped in temperatures within
the limits -40° C to +80° C. It is advisable to protect the TT-3020C
from extreme temperature variation which can cause excessive
condensation. It is recommended that the TT-3020C is unpacked
immediately on delivery.
1.3 Repackaging for shipment
The shipping carton for the TT-3020C has been carefully de-
signed to protect the transceiver and its accessories during ship-
ment. This carton and its associated packing material should be
used when repackaging for shipment. Attach a tag indicating the
type of service required, return address, model number and full
serial number. Mark the carton FRAGILE to ensure careful han-
dling.
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 400 of 1234
Repackaging for shipment
Repackaging for shipmentRepackaging for shipment
Repackaging for shipment Introduction
IntroductionIntroduction
Introduction
25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00 Page
PagePage
Page 1-3
1-31-3
1-3
If the original shipping carton is not available, the following gen-
eral instructions should be used for repackaging with commer-
cially available material.
1. Wrap the TT-3020C in heavy paper or plastic. Attach a tag in-
dicating the type of service required, return address, model
number and full serial number.
2. Use a strong shipping container, e.g. a double walled carton
of 160 kg test material.
3. Protect the front- and rear panel with cardboard and insert a 7
cm to 10 cm layer of shock absorbing material between all
surfaces of the equipment and the sides of the container.
4. Seal the shipping container securely.
5. Mark the shipping container FRAGILE
FRAGILEFRAGILE
FRAGILE to ensure careful han-
dling.
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 401 of 1234
Introduction
IntroductionIntroduction
Introduction Repackaging for shipment
Repackaging for shipmentRepackaging for shipment
Repackaging for shipment
Page
PagePage
Page 1-4
1-41-4
1-4 25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00
This page is intentionally left blank
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 402 of 1234
Technical specifications
Technical specificationsTechnical specifications
Technical specifications Installation - TT-3020C
Installation - TT-3020CInstallation - TT-3020C
Installation - TT-3020C
25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00 Page
PagePage
Page 2-1
2-12-1
2-1
2 Installation - TT-3020C
This chapter provides specific information enabling you to install
the TT-3020C Capsat Transceiver into your own system, with a
minimal effort. The default, or factory configuration is described,
together with procedures for altering this configuration.
2.1 Technical specifications
Model TT-3020C
General Specifications Meets or exceeds all INMARSAT
specifications for the Inmarsat-C
Network for SOLAS with distress call
functions. (CN114 and IEC 945 require-
ments).
EEC EMC, CE and Wheel Mark
Transmit Frequency 1626.5 to 1660.5 MHz.
Receive Frequency 1525.0 to 1559.0 MHz.
Channel Spacing 5 / 2.5 / 1.25 kHz.
Modulation 1200 symbols/sec BPSK.
Ambiguity Resolution Unique word.
Coding R 1/2 K=7 convolutional code, (inter-
leaved code symbols RX).
Data Rate 600 bit/sec.
RX Frame Length 8.64 seconds.
TX Signalling Access Mode Slotted ALOHA.
TX Message Channel TDMA & FDMA, interleaved code
symbol.
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 403 of 1234
Installation - TT-3020C
Installation - TT-3020CInstallation - TT-3020C
Installation - TT-3020C Technical specifications
Technical specificationsTechnical specifications
Technical specifications
Page
PagePage
Page 2-2
2-22-2
2-2 25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00
Antenna Interface Standard 50 Ohm female TNC-connector.
Max 70m cable with TT-3005A antenna or
max 100m cable with TT-3001B or TT-
3005M antenna.
Terminal Interface EIA/TIA-232-E DTE interface. CCITT
Rec.V.24/28, 110-38400 Baud IA-5 code,
DB-9F connector.
Printer Interface Standard parallel Centronics, DB-25F
connector. IEEE P1284-I
I/O Interface: NMEA-0183 version 2.1 interface and
multidrop addressing, max.100 meter
cable.
ArcNet 156Kbit token based I/O, max
100 meter cable (ATA/ANSI 878.1)
Four dedicated In/Out pins and two
Inputs pins to the TT-3042C Remote
Alarm/Distress Box.
DB-15F connector
System Set-up Flash memory
DC Power Source 10.5 to 32 V floating DC
RX: 3.8 W with GPS 4.4W
TX: Typ. 80 W max. 90W
Fuse 12A T
Ambient Temperature -25°C to 55°C operating
-40°C to 80°C storage.
Electronic Unit Mounting Mounting bracket.
Dimensions H x W x D 50mm x 180mm x 165mm. ( car radio
standard ISO7736 )
Weight 1.3 kg
Table 1 TT-3020C technical specifications.
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 404 of 1234
Compass Safe Distance
Compass Safe DistanceCompass Safe Distance
Compass Safe Distance Installation - TT-3020C
Installation - TT-3020CInstallation - TT-3020C
Installation - TT-3020C
25-Jul-00
25-Jul-0025-Jul-00
25-Jul-00 Page
PagePage
Page 2-3
2-32-3
2-3
Inmarsat-C Protocol support Message transmission and reception
with IA-5, ITA-2 and binary transfer
to/from the following destinations:
Telex
PSTN (telephone modems and fax
modems)
PSDN (X.25 network)
EGC message reception with
automatic geographical area
selection
Polling and data reporting with
automatic transmission of position
reports down to a recommended
minimum of 1 per 5 minutes.
Special Access Codes
DNID Messaging
Program Unreserved Data reporting
Pre-assigned Data reporting
Transmit message size: Max 32Kbyte
Receive storage: 106 Kbyte
SOLAS distress calling facilities.
Table 2 Inmarsat-C Protocol support.
2.2 Compass Safe Distance
The compass safe distance of the TT-3020C transceiver has been
measured in accordance with the standards specified in ISO/R
694, Method B. The safe distance found is 50 cm.
Document Nr: I-MA-3010.68-5510-762-IVT-312
Page 405 of 1234
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
