Russound CA Manuel

The CA Keypad Color Conversion Kit is used to change the keypad’s exterior plastics to another color. The kit consists of a

bezel and volume up/down buttons (KPSC does not have volume buttons).

Note: The keypad must be powered off before installing the conversion kit. For installed keypads, unplug the CA controller.

CA Keypad Color Conversion Kit Instructions

Locate the four tabs (two on

each side) that hold the bezel in

place. Press the tab until the

bezel is free. (KP6 keypad is

shown)

Place the new bezel over the

buttons and press firmly until

the four tabs snap into place.

The label window must be cor-

rectly placed on the keypad for

the bezel to snap into place.

To replace, line up

the openings in

the back of the

light box over the

corresponding

LEDs on the cir-

cuit board.

The light box that

holds the source

labels may come out.

Pull off the volume up/down rockers. The

elastomer source button and mat (one piece)

may move out of place.

To replace, make sure the two protruding

guides on the bottom of the pad are placed

in the corresponding holes on the keypad.

Position the replace-

ment volume rockers

over the elastomer

mat. The volume

arrows protrude from

the elastomer and fit

into the openings on

the volume buttons.

Caution: Too much

force may cause the

tabs to break.

KP4, KP6, KPL, KPSC Keypads

KP4, KP6 Keypads

See reverse side for KPL and

KPSC keypad instructions

5 Forbes Rd. Newmarket, NH 03857

Tel 603.659.5170 • Fax 603.659.5388

e-mail: [email protected] 09/29/05

The elastomer button mat comes

off with the bezel. To replace, pull

the button mat away from the

bezel, and lay it back on top of

the keypad, making sure the two

protruding guides on the bottom

of the mat are placed in the corre-

sponding holes on the keypad.

See reverse side for KP4 and

KP6 keypad instructions

KPL Keypad

Pull off the volume up/down rockers. The

elastomer source button and mat (one piece)

may move out of place.

To replace, make sure the two protruding

guides on the bottom of the pad are placed

in the corresponding holes on the keypad.

Place the new bezel over the buttons and

press firmly until the four tabs snap into

place.

Position the replace-

ment volume rockers

over the elastomer

mat. The volume

arrows protrude from

the elastomer and fit

into the openings on

the volume buttons.

KPSC Keypad

Place the new bezel over the buttons and

press firmly until the four tabs snap into

place.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Russound Clavier

Russound

Russound A-K3 Manuel utilisateur

Russound

Russound SPG Manuel utilisateur

Russound

Russound CA 6.4 LRN Manuel utilisateur

Russound

Russound A-BUS A-KP2 Manuel utilisateur

Russound

Russound V-KP-1 Manuel utilisateur

Russound

Russound Sphere E Series Manuel utilisateur

Russound

Russound UNO-S2 Manuel utilisateur

Russound

Russound KPSC Manuel utilisateur

Russound

Russound KP4-KP6 Manuel utilisateur

Russound

Russound A-K4 Manuel utilisateur

Russound

Russound MDK-C5 Manuel d'utilisation

Russound

Russound CA-LCD2 Manuel utilisateur

Russound

Russound CA4-KP Manuel utilisateur

Russound

Russound IPK-1 Manuel utilisateur

Russound

Russound KP4 Manuel utilisateur

Russound

Russound KPSC Manuel utilisateur

Russound

Russound V-KP-1 Manuel utilisateur

Russound

Russound Sphere E Series Manuel utilisateur

Russound

Russound ST2-KP Manuel utilisateur

Russound

Russound CA-LCD Manuel utilisateur

Russound

Russound ISK2 Manuel utilisateur

Russound

Russound UNO-S2 Manuel utilisateur

Russound

Russound MDK-C6 Manuel utilisateur

Russound

Russound KPL Manuel utilisateur

Manuels Clavier populaires d'autres marques

BFT

BFT SELETTO Manuel utilisateur

Micro Id

Micro Id MP7G3BL Manuel d'instructions

WindowMaster

WindowMaster WLI 130 Manuel utilisateur

ACT

ACT ACT PRO 1030 Manuel utilisateur

Cardin

Cardin SSB Series Manuel utilisateur

Harman Kardon

Harman Kardon KP 1 Manuel utilisateur

Chamberlain

Chamberlain KPR2000 Guide de l'utilisateur

CYP

CYP CR-KP1 Manuel utilisateur

Aeware

Aeware k-35 Series Guide de référence

Aritech

Aritech CS-175 Series Manuel utilisateur

GE NetworX NX-1600E Series Manuel utilisateur

Lenze AC Tech

Lenze AC Tech MC SERIES Manuel utilisateur

Burg Wächter

Burg Wächter secuENTRY 7711 Manuel utilisateur

Aeware

Aeware in.k450 Manuel utilisateur

Lenze

Lenze EPM-H410 Manuel utilisateur

Toshiba

Toshiba RKP007Z Manuel utilisateur

Gemini

Gemini GEM-DXK1 KEYPAD Manuel utilisateur

Bosch

Bosch D1260 Series Manuel utilisateur