RSC duDuo e1 Manuel utilisateur
duDuo e1
Dual channel dashcam
Copyright © 2018 RSC Labs Inc. All rights reserved
User Manual
Table of Contents
Page
Box Contents...............................................1
Camera Overview.........................................2-3
Installation..................................................4-7
Insert memory card
Attach mount to Camera
Installing the Front Camera
Remove Lens Protection Film (Front)
Installing the Rear Camera
Remove Lens Protection Film (Rear)
Connect Dual Channel Cable
Connect Power Cable
Connect Rear Camera Cable
Organize the wirings
Connect Power Adapter
Adjust Camera Angle
Camera Operation....................................... 8-9
Button Usage & Operation
Initial Camera Setup
Using the Camera........................................10-11
Powering On / Off
Loop Recording
Emergency le protection
Parking Surveillance Mode
Enable Screen Saver Manually
Enable/Disable Audio Recording
Retrieving your videos
Firmware Update
Camera Settings .........................................12-13
Frequently Asked Questions (FAQ) ..............14-15
Notice......................................................... 16-17
FCC Statement
Warranty
Contact
Box Contents
duDuo e1
Front Camera
Suction Cup Mount
for Front Camera
Rear Camera CableCar Power Adapter
3M Adhesive Tape
for Rear Camera
1
duDuo e1
Rear Camera
Camera Overview
2
Front View
Speaker
Microphone
Camera Lens
Top View
Bottom View
Power/LCD Off
Reset
Power Port
HD Out
Front Camera
Camera Overview
3
Back View
microSD
Card Slot
Menu/Return
Down /
Microphone Mute
Up /
Switch Screen
Status LED OK/
ProtectFile/Snapshot
Front View
Top View
3M Adhesive
Tape Mount
Rear Camera
Lens
Rear Camera
Cable Connection
Rear Camera
Installation
4
1. Insert memory card
Insert a microSD memory card into the memory
card slot located on the left side of the LCD screen.
Be aware of the orientation shown in the picture
located on the right. (Electrical contacts of the
memory card should be facing the LCD display side
of the camera, with the notches of microSD card
facing up.) When the memory card is successfully
inserted, you will hear a ‘clicking’ sound.
**A Class 10, 8GB or above microSD memory card is required. The camera
supports up to 128GB of memory capacity. (Memory card not included.)
2. Attach mount to camera
Align and position mount connector with the
groved notch located at the top of the camera.
Push mount in the direction towards the LCD side.
Ensure the mount is securely attached before
installing camera.
3. Install the front camera
Find a suitable location on your windshield to install
the camera. We recommend placing the camera
behind the rear view mirror while not obstructing
your view when driving.
Clean the windshield using water or alcohol and
wipe clean with a lint-free cloth before installing.
Ensure the suction mount is clean before installing
to windshield.Rotate the locking knob on the mount
clockwise until it clicks. After that, the camera is
securely mounted on the windshield.
Installation
5
5. Install the rear camera
Locate a suitable position on your rear windshield
to install the rear camera. We recommend placing
the camera at the top-centered position for the best
results.
Clean the rear windshield using water or alcohol,
and wipe clean with a lint-free cloth.
Peel off the protection lm from the 3M adhesive
pad and attach the mount on the rear windshield.
4. Remove Lens Protection Film (Front)
Remove the Protection lm from the Front
Camera’s lens. For best video recording results,
please try to avoid touching the camera lens with
ngers, as ngerprints and/or oil may degrade
image quality.
6. Remove Lens Protection Film (Rear)
Remove the Protection lm from the Rear Camera’s
lens. For best video recording results, please
avoid touching the camera lens with ngers, as
ngerprints and/or oil may degrade image quality.
Installation
6
7. Connect Dual Channel Cable
The dual channel cable consists of 3 separate
plugs. The rst is a microUSB male plug “labelled
B” that has two joined cables in Y-split form. The
second plug is a microUSB female port. The third
plug is an angled microUSB plug for the Rear
Camera. Please plug the microUSB with the two
joined cables into the Front Camera’s USB Port.
8. Connect Power Cable
Connect the microUSB male plug from the Power
Adapter supplied into the female microUSB port on
the Dual Channel cable.
9. Connect Rear Camera Cable
Connect the angled microUSB male plug of
the Dual Channel cable into the Rear Camera’s
microUSB port.
10. Organize the wires
Hide the power cable by tucking the cable into the
space between the seams of the vehicle headliner
and the top of the windshield. Route the power
cable down from one side of the windshield along
the A pillar trim and route the Rear Camera cable
down from the other side of the vehicle. We
recommend routing the cables on separate sides
due to the thickness of the wires if routed together.
Professional installation is recommended.
Installation
7
Power Cable
Rear Camera Cable
Power ON the camera by starting your vehicle. The
camera will automatically power on upon receiving
power from the cigarette lighter port. After the
initial setup, use the live view on the LCD screen to
adjust the camera angle and settings.
Please ensure vehicle is started and running in a
well ventilated space.
11. Connect Power Adapter
Power on the camera by starting your vehicle. The
camera will automatically power on upon receiving
power from the cigarette lighter port. After the
initial setup, use the live view on the LCD screen to
adjust and obtain the preferred camera angle.
12. Adjust Camera Angle
Camera Operation
8
Button usage and operation
The camera is primarily operated and controlled using the buttons located at the
right side of the camera. Depending on the current mode of operation, the function
of the buttons will change accordingly. Listed below, is a chart of how each button
operates in different camera modes;
Recording Mode
Button Action
Access Menu Settings
Switch camera display
Microphone On/Off
Manual File Lock / Take Snapshot
Menu Settings
Button Action
Back to previous page
Up
Down
Conrm
Playback Mode
Button Action
Stop Playback
Rewind
Fast Forward
Pause
Table des matières
Langues :
Autres manuels RSC Caméra embarquée
