Rose electronics VISTA DVI Manuel utilisateur

Vista DVI

Quick Start Guide

Setup

The 8-Port DVI USB KVM Switch requires no user settings or unit configuration.

Simply connect up to 8 computers and a local KVM station as outlined in the

following steps.

Computer Connections



Connect each computer to a numbered port (1-8) using a DVI-I MM video

cable.



Connect a USB Type A to Type B cable from your computers USB Type A

port to the USB Type B port on the unit.



Optionally, connect two audio cables between the Speaker or line out port

and the MIC port on the computer to the corresponding ports on the unit.

NOTE: If you are using a computer with analog video, a VGA to DVI adapter will

be needed at the switch DVI-I port

Console Connections



Connect a DVI monitor to the corresponding DVI console port on the unit



Connect a USB keyboard and USB mouse to the USB console ports with the

appropriate Icon



Optionally connect a pair of powered speakers and a microphone to the

corresponding ports on the unit.



Connect any shared USB 2.0 device (USB drive, tablet, etc.) to the USB hub

port on the switch.

NOTE: Do not connect a keyboard or mouse into the USB ports labeled “Hub;”

These ports are for optional USB shared devices.

Only one connection is necessary if using an integrated USB keyboard

and mouse.

Powering Up the System



Connect the supplied power adapter to the unit and apply power



Turn on the KVM monitor and Boot up each computer one by one



Turn on all USB peripherals

Controlling the Unit

The unit can be controlled by using keyboard hotkey sequences or the front

panel switches. Hotkey sequences provide greater control flexibility than the front

panel switches. The following table shows a complete list of the hotkey

commands and front panel switch functions.

Command Hotkeys Description

Select PC channel 1ScrLk + ScrLk + (x)

x is top row numeric key

from 1 - 8

Select the active PC channel

(joint select PC port/hub port/audio

& mike, if binding enabled

Select Hub port control 1ScrLk + ScrLk + (Fx)

Fx is Function key

F1 - F8

Select the PC channel that

controls all USB hub ports

Select audio & mike

channel 2ScrLk + ScrLk + A + (y)

y is top row numeric key

from 1 - 8

Select the active audio & mike

channel

Binding PC and hub port

control switching ScrLk + ScrLk + Z

Enable the binding of PC port and

hub port control switching. Once

enabled, any PC and/or hub

switching is bound together

(factory default).

Unbind PC and hub control

switching ScrLk + ScrLk + X

Disable the binding of PC port and

hub switching control

Binding PC audio/mike

switching ScrLk + ScrLk + Q

Enable the binding of PC port and

audio & mike control switching.

Once enabled, any PC and/or

audio/mike switching is bound

together (factory default).

Unbind PC audio/mike

control switching ScrLk + ScrLk + W

Disable the binding of PC port and

hub switching control

Next lower PC channel 1, 2 ScrLk + ScrLk + arrow up

Select the next lower PC channel

Next higher PC channel 1, 2

ScrLk + ScrLk + arrow

down Select the next lower PC channel

Previous PC channel ScrLk + ScrLk +

backspace Toggle between the previous

channel and current channel

Beep sound on/off ScrLk + ScrLk + B Toggle on/off the beep sound

while scanning

Define Hokey preceding

sequence ScrLk + ScrLk + H + (y)

y = scroll lock, caps, esc,

F12, or numlock

Select the hotkey preceding

sequence from five alternatives

Autoscan ScrLk + ScrLk + S Scan though every connected

channel. Scan delay is 5 seconds.

Autoscan with

programmable delay time ScrLk + ScrLk + S + (z)

z = top numeric keys 1 - 0

Autoscan with a user-defined

delay time from 10 -100 seconds

(1 = 10 seconds, 2 = 20 seconds,

etc.)

Stop autoscan Press any keyboard key

Front panel switch functions

Command Switch Description

Select PC channel 1Press the corresponding

button to select the active PC

channel

Select the active PC channel

(joint select PC port/hub

port/audio & mike, if binding

enabled

Select Hub port control 1Press the corresponding

button to select the active PC

channel

Select the PC channel that

controls all USB hub ports

Define Hokey preceding

sequence ScrLk + ScrLk + H + (y)

y = scroll lock, caps, esc,

F12, or numlock

Select the hotkey preceding

sequence from five

alternatives

Stop autoscan Press any button

NOTES:

1. If you have defined a different hotkey sequence other than the default

ScrLk + ScrLk, use the re-defined hotkey sequence in place of the default.

2. When the binding of the PC and the USB hub port control switching is

enabled by the hotkey sequence ScrLk + ScrLk + Z, the PC and hub will be

bound and switched together. For example, switching from PC 1 to PC 2 will

connect the KVM console to PC 2 as well as the shared USB hub. Any USB

devices on the hub will now be connected to PC 2. To remove this binding,

use ScrLk + ScrLk + X.

3. When the binding of PC, Audio & mike port control switching is enabled by

the hotkey sequence ScrLk + ScrLk + Q, the PC, audio and mike will be

bound and switch together. For example, switching from PC 1 to PC 2 will

connect the KVM console to PC 2 as well as the audio and mike. To remove

this binding, use ScrLk + ScrLk + W

4. Hotkey sequences consist of at least three specific keystrokes. Each

keystroke must be completed within 2 seconds; otherwise, the hotkey

sequence command will be aborted.

〒103-0014

東京都中央区日本橋蛎殻町 1-16-11

TEL:03-3668-8089 FAX:03-3668-9872

URL:http://www.cybernetech.co.jp

Autres manuels pour VISTA DVI

Autres manuels Rose electronics Changer

Rose electronics

Rose electronics Vista AV Manuel utilisateur

Rose electronics

Rose electronics Xtensys XTS-V16x64D16-L Manuel utilisateur

Rose electronics

Rose electronics MultiStation ML-2U Manuel utilisateur

Rose electronics

Rose electronics ULTRAMATRIX 4xE Manuel utilisateur

Rose electronics

Rose electronics MasterSwitch MS-5P Manuel utilisateur

Rose electronics

Rose electronics CTP-4P Manuel utilisateur

Rose electronics

Rose electronics UltraLink UL-DV3 Manuel utilisateur

Rose electronics

Rose electronics UltraLink 2 Manuel utilisateur

Rose electronics

Rose electronics Vista Mini Manuel utilisateur

Rose electronics

Rose electronics UltraConsole UC1-1X16U Manuel utilisateur

Rose electronics

Rose electronics Ultraview Remote 2 Manuel utilisateur

Rose electronics

Rose electronics SuperSwitch SS-9 Manuel utilisateur

Rose electronics

Rose electronics ORION lc Manuel utilisateur

Rose electronics

Rose electronics B - Chassis Manuel du propriétaire

Rose electronics

Rose electronics UltraLink UL-V3 Manuel utilisateur

Rose electronics

Rose electronics MultiVideo MEB-4U2V Manuel utilisateur

Rose electronics

Rose electronics UEB-8UB Manuel

Rose electronics

Rose electronics QuadraVista Manuel utilisateur

Rose electronics

Rose electronics UltraConsole Remote UCR-1R1X04U Manuel utilisateur

Rose electronics

Rose electronics UEB-8UB Manuel utilisateur

Rose electronics

Rose electronics Vista KVL-4PCA Manuel utilisateur

Rose electronics

Rose electronics UltraMatrix EE2-1X16U/E Manuel utilisateur

Rose electronics

Rose electronics UltraMatrix AV Manuel utilisateur

Rose electronics

Rose electronics UltraMatrix Remote 2 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur