Rose electronics UltraMatrix AV Manuel utilisateur

UltraMatrix A/V Matrix A/V Switch

Quick Start Guide

10707 Stancliff Road

Houston, Texas 77099 Phone: (281) 933-7673

www.rose.com

Unit Installation

Getting Started

(IT IS RECOMMENDED THAT ALL EQUIPMENT BE POWERED OFF UNTIL ALL

CONNECTIONS HAVE BEEN MADE)

Hardware Installation (System must include one master and one secondary unit)

(Installation is performed for each computer (1-16) that is connected to the unit)

1. Connect a serial ”Y” cable (DB9MF) from both UltraMatrix A/V RS232 ports (DB9F) to

the serial port on the controlling computer.

2. Connect up to 16 computers that have your video content to the HD15F video input

connectors labeled In 1-16 on both units using a HD15 MM “Y” cable.

Keep video synchronized; connect to port #1 on the master and port #1 on the

secondary, port #2 on the master and port #2 on the secondary, etc.

3. Connect up to 16 optional audio inputs (Usually from the 16 corresponding computers)

to the 3.5mm audio inputs labeled In1-16) using an audio “Y” cable.

4. Connect up to 32 display monitors to the HD15F video output connectors labeled

OUT1-16 on unit #1 and OUT1-16 on unit #2 using the existing monitor cable or an

extension cable for greater distances.

5. Connect up to 32 optional stereo audio speakers to the 3.5mm audio inputs labeled

Out1-16) on unit #1 and Out1-16 on unit #2.

6. Connect a power cord to the power port on each unit and to a 100/240 VAC power

source

7. Apply power to all connected computers and remote monitors.

Serial Y cableVideo Y cable

Controlling computer

running RoseControl

Secondary Unit

Identified by /NR

suffix on part number

Master Unit

Identified by NO /NR

suffix on part number

Operating the UltraMatrix A/V 16x32

The UltraMatrix A/V can be operated via:

RS-232 serial command inputs or using the provided RoseControl Windows®based software

Rose Control Windows-based software control

The UltraMatrix A/V can be easily switched using the included Rose Control software.

Install the software on a computer or laptop that will be used to switch the UltraMatrix A/V.

When the installation is complete, execute the program “RoseControl” from the “Start” menu and

the below window will display.

Router Count: Set to the number of routers connected to the computer

Advanced Configuration: Used when two conditions are true: 1) There is more than one

router being used, and 2) all the inputs are NOT looped from

router to router. In other words, if there are more than 16

different inputs to control, you will need the advanced

configuration.

Reset Advanced Configuration: Returns the advanced settings to their default numbers.

Router Type: Select the type of router that is connected at this Frame

Address

The Frame Address is the selectable number on the router's

front panel

The Frame Address is displayed to the left of the Router Type

in the Configuration Window

A/V Split: This feature will be in future designs.

Inputs: Enter the number of physical inputs on the back of the router.

Outputs: Enter the number of physical outputs on the back of the

router.

Comm Port The port number on the back of the computer that connects to

the router(s).

Timeout Set how many seconds the program will wait for the router to

respond to commands. Can be in entered in hundredths of a

second. Example: 2.5 will wait 2 and 1/2 seconds. If 0 is

entered, the router will not wait for a response, and therefore

will not display any errors that may happen.

When you click on the OK tab, the below selection matrix will display.

Input Names and

Output Names can

be modified to easily

identify which video

source is being

presented on which

output monitor.

To change these

names, select it and

enter the name

needed.

(Inputs are listed vertically, Outputs are listed horizontally)

Click on the cross-point button to connect an input to an output. Once assigned,

that video and optional audio is instantly switched to the selected outputs.

In the above example: Input 1 is connected to output 16;

Input 3 is connected to output 10 and 13;

Input 4 is connected to output 14.

Unique assignments can be saved in a “Macro” and selected by choosing the Macro needed.

To record a macro, click on the “Record” button and then make your video assignments. When

finished, click on the “Save Macro” button, select a macro # to save the configuration to, enter a

macro name and click “OK”. The macro can be used at any time. If the configuration is not

saved, the macro set-up will be lost when the RoseControl software is terminated. Save the

configuration by clicking on “File”, “Save Configuration”

Please refer to the Help file for additional information.

Serial switching instructions

Baud rate 9600

Start Bits 1

Data Bits 8

Parity None

Stop Bits 1

Command to switch input 1 to output 1 for the default address of 00 is BE EF 00 00 00 00 00 51

Convert each byte to it’s binary equivalent.

BE 1011 1110

EF 1110 1111

00 0000 0000

XOR result 0101 0001

Hex equivalent 5 1

To arrive at the XOR result, look at each

column and note the number of 1s. If

there is an even number of 1s or all

zeroes in a column, the result for that

column is zero. The result is 1 if there is

an odd number of 1s in the column.

A B C D E F

BE EF 00 00 00 00 00 51

A = Frame address (00 = master, 01 = secondary)

B = Reserved

C = Command (00 = switch command)

D = Input port number (00 = port #1, 01 = port #2, etc)

E = Output port number (00 = port #1, 01 = port #2, etc)

F = Calculated Check Sum

Example : Command to switch input #3 to output #2

BE EF 00 00 00 02 01 52

〒103-0014

東京都中央区日本橋蛎殻町 1-16-11

TEL:03-3668-8089 FAX:03-3668-9872

URL:http://www.cybernetech.co.jp

Autres manuels pour UltraMatrix AV

Autres manuels Rose electronics Changer

Rose electronics

Rose electronics Orion XC OXS-XC080-TP Manuel utilisateur

Rose electronics

Rose electronics Xtensys XTS-V16x64D16-L Manuel utilisateur

Rose electronics

Rose electronics UltraLink UL-V3 Manuel utilisateur

Rose electronics

Rose electronics UltraConsole UC1-1X4U Manuel utilisateur

Rose electronics

Rose electronics MASTER SWITCH Manuel utilisateur

Rose electronics

Rose electronics UltraMatrix Remote 2 Manuel utilisateur

Rose electronics

Rose electronics MasterSwitch MS-5P Manuel utilisateur

Rose electronics

Rose electronics RE2-1R2X16U Manuel utilisateur

Rose electronics

Rose electronics ServeView Pro SEB-8UB Manuel utilisateur

Rose electronics

Rose electronics QuadraVista Manuel utilisateur

Rose electronics

Rose electronics UltraLink UL-DV3 Manuel utilisateur

Rose electronics

Rose electronics ORION lc Manuel utilisateur

Rose electronics

Rose electronics UltraView Manuel utilisateur

Rose electronics

Rose electronics Vista LC DVI Manuel utilisateur

Rose electronics

Rose electronics Vista KVL-4PCA Manuel utilisateur

Rose electronics

Rose electronics switch/hub Manuel utilisateur

Rose electronics

Rose electronics Vista AV Manuel utilisateur

Rose electronics

Rose electronics Vista DVI Plus Manuel utilisateur

Rose electronics

Rose electronics MultiStation ML-2U Manuel utilisateur

Rose electronics

Rose electronics Ultraview Remote 2 Manuel utilisateur

Rose electronics

Rose electronics RP2-1R2X16U Manuel utilisateur

Rose electronics

Rose electronics Ultraview Pro UKT-KVM-1U08-Z Manuel utilisateur

Rose electronics

Rose electronics Vista KM III/A1 Manuel utilisateur

Rose electronics

Rose electronics QuadraVista Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur