Rollease acmeda Easy Spring Wand Manuel utilisateur

EASY SPRING WAND

INSTALLATION MANUAL

April 2018

All manuals and user guides at all-guides.com

all-guides.com

Page 1 Easy spring WAND Assembly Manual | April 2018

CONTENTS

April 2018

This manual is to be read in conjunction with the Product Specifications & Assembly manual

SECTION

DESCRIPTION

PAGE NO.

SECTION 1 − ITEMS REQUIRED 1.1

SECTION 2 − INSTALLATION 2.1

PART A – PREPARING INSTALLATION SPACE 2.1

PART B – MOUNTING BRACKET AND SHADE INSTALLATION 2.1

PART C – PRETENSION CHECKS 2.3

PART D – SET LIMITS 2.6

SECTION 3 − TROUBLESHOOTING 3.1

DISCLAIMER

INTRODUCTION

This Installation manual has been produced by Rollease Acmeda to supply the necessary information for safe and correct installation of this system.

INSTALLERS RESPONSIBILITY

Before installing, please read & ensure you understand the safety information and installation instructions as defined in this installation manual.

•If you do not fully understand these instructions, contact Rollease Acmeda for clarification before installing.

•The Installer is responsible to ensure that all installation personnel have been adequately trained on the safe & correct installation and operation.

•The Installer is responsible to ensure that a Job Safety Analysis or Safe Work Method Statement is completed prior to installation to identify hazards, to determine

appropriate risk control measures and to implement the control measures.

•The Installer is responsible to ensure that supporting structures are sound and can adequately support the load.

•The Installer is responsible to ensure that the devises used to anchor the product to the supporting structure are suitable for the application.

•The fasteners provided are intended for fastener to timber. The installer is responsible for selecting fasteners that are suitable for other substrates

SAFETY INFORMATION

•Ensure Job Safety Analysis/Safe Work Method Statement is completed and actions to reduce risks are implemented.

•Ensure that electrical works are done only by a LICENSED ELECTRICIAN.

•DO NOT modify any of the components of this system.

PERSONNEL REQUIREMENTS

Only suitably trained/qualified personnel should undertake installation.

DISCLAIMER

Rollease Acmeda has used reasonable care in preparing the information included in this document, but makes no representations or warranties as to the completeness or

accuracy of the information. Information is supplied upon the condition that the persons receiving the information will make their own determination as to its suitability

for their purposes prior to use. Rollease Acmeda assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the

information included herein. Rollease Acmeda reserves the right to make changes without further notice to any products to improve reliability, function or design.

by any information storage or retrieval system, without the express permission from Rollease Acmeda.

All manuals and user guides at all-guides.com

Page 1.1 Easy Spring Wand Installation Manual | April 2018

SECTION 1 − ITEMS REQUIRED

TOOLS REQUIRED

•Drill

•Drill Bits

•Measuring Tape

•Pencil

•Screw Driver - Flat Head

•5mm Socket

•Ratchet

SHADE

ITEMS REQUIRED

Check you have all items required to complete installation;

1. Shade Assembly

2. 2 x Bracket Covers

3. 2 Mounting Brackets

4. Appropriate Fasteners

All manuals and user guides at all-guides.com

Page 2.1 Easy Spring Wand Installation Manual | April 2018

SECTION 2 − INSTALLATION

PART A

–

PREPARING

INSTALLATION SPACE

STEP 1 – ENSURE TOP OF INSTALLATION SPACE IS LEVEL

PART B

–

MOUNTING

BRACKET

AND

SHADE

INSTALLATION

STEP 1 – INSTALL BRACKETS TO WALL / CEILING USING APPORPRIATE FASTENERS TO SUIT APPLICATION

INSTALL BRACKETS AS PER INSTALLATION REQUIREMENTS

NOTE: Install additional Easy-Link bracket if required

All manuals and user guides at all-guides.com

Page 2.2 Easy spring WAND Installation Manual | April 2018

STEP 2 – INSTALL SHADE ONTO MOUNTING BRACKETS

Note: Insert limiter end into bracket first

Ensure Control End is fully engaged with the top bracket tongue

All manuals and user guides at all-guides.com

Page 2.3 Easy spring WAND Installation Manual | April 2018

PART C

–

PRETENSION

CHECKS

STEP 1 – CHECK FUNCTIONALITY OF PRE TENSIONED SHADE

i) PULL Bottom Rail

down to bottom

location

ii) Shade will raise within range

indicated below to be locked and

provide a 'Release Allowance'

(for raising the shade)

iii) TUG Bottom Rail

(Shade will automatically

rise)

NOTE: As limits are not set,

ensure Bottom Rail is

controlled so Shade doesn't

Crash into structure and

damage fabric

If Bottom Rail raises at the

desired speed, the correct

number of pre-turns have been

assigned

If Shade stops midway or slows significantly, insufficient pre-turns

have been applied.

Pre-turns to be added

If Shade operates too fast, too many pre-turns have been

applied.

Pre-turns to be removed

PROCEED TO PART D

MAX 33mm (1.3”)

PULL

←

Limit Position

All manuals and user guides at all-guides.com

all-guides.com

Page 2.4 Easy spring WAND Installation Manual | April 2018

BEFORE ADDING OR REMOVING PRE TURNS

IF ADJUSTING PRETENSION WHILE SHADE IS INSTALLED:

Ensure the shade is raised fully at the top limit position before

making any adjustments.

IF ADJUSTING PRETENSION WITH SHADE REMOVED FROM

BRACKETS:

Before removing the shade, ensure the shade is lowered

slightly in its locked position. Shade must not be resting on

top limit. This is to prevent the spring from loosing the

pretension when removing the shade from brackets.

←

Limit Position

←

Locked Position

←

Limit Position

←

Locked Position

All manuals and user guides at all-guides.com

Page 2.5 Easy spring WAND Installation Manual | April 2018

PRE TENSION ADJUSTMENT – SHADE INSTALLED

Insert Socket Ratchet onto adjusting shaft and rotate in

counter clockwise to increase pre-turns as required.

NOTE: If there is insufficient space to rotate Socket Ratchet

within installation, Shade will need to be removed from the

bracket to undertake process.

Re-check functionality of blind as per process i, ii & iii outlined

above in this step.

(Pretension direction is reversed for LH control)

Insert Socket Ratchet onto adjusting shaft and rotate in a

clockwise direction to decrease pre-turns as required.

NOTE: If there is insufficient space to rotate Socket Ratchet

within installation, Shade will need to be removed from the

bracket to undertake process.

Re-check functionality of blind as per process i, ii & iii outlined

above in this step.

(Pretension direction is reversed for LH control)

PRE TENSION ADJUSTMENT – SHADE REMOVED

Hold the shade and use the Socket Ratchet

to rotate the adjusting shaft (and wand

control head) in an anti-clock wise

direction enough to release the booster

lock. The ratchet will move back under the

spring tension.

While holding the shade, grip the

wand control head and also prevent

both from turning. To add tension,

rotate the Socket Ratchet for the

number of turns desired in a counter

clockwise. (Note, to remove tension

allow the spring to unwind in the

clockwise direction)

To re-lock the booster and shade, while

holding the shade, release the wand

control and rotate the Socket Ratchet

enough to re-engage the lock (approx. ¼

turn). The ratchet should move back under

the booster tension to the locked position.

All manuals and user guides at all-guides.com

Page 2.6 Easy spring WAND Installation Manual | April 2018

PART D

–

SET LIMITS

STEP 1 – SET TOP LIMIT

Ensure Shade is fully raised

To lower the top limit position rotate limiter head so that the

Shade moves down.

To raise the top limit position rotate limiter head so that the

Shade raises.

NOTE: The shade must not be locked by the spring to allow the

bottom rail to move up

*Standard back roll shown, reverse for front roll

STEP 2 – TEST LIMITS & SHADE FUNCTIONALITY

Operate Shade up & down

All manuals and user guides at all-guides.com

Page 2.7 Easy spring WAND Installation Manual | April 2018

STEP 3 – SLIDE END CAP COVERS OVER BRACKETS

All manuals and user guides at all-guides.com

Autres manuels pour Easy Spring Wand

Autres manuels rollease acmeda Store vénitien

rollease acmeda

rollease acmeda Zipscreen Extreme Manuel utilisateur

rollease acmeda

rollease acmeda Automate FT Manuel utilisateur

rollease acmeda

rollease acmeda WireGuide Skylight Manuel utilisateur

rollease acmeda

rollease acmeda Easy Spring Air Guide de configuration

rollease acmeda

rollease acmeda Easy Link Manuel utilisateur

rollease acmeda

rollease acmeda Automate MT01-1325-069001 Manuel d'installation

rollease acmeda

rollease acmeda Easy Spring Air Manuel utilisateur

rollease acmeda

rollease acmeda Easy Spring Air Guide de configuration

rollease acmeda

rollease acmeda Zipscreen Extreme Manuel utilisateur

rollease acmeda

rollease acmeda Easy Spring Wand Manuel utilisateur

rollease acmeda

rollease acmeda SKYLINE BOTTOM UP Manuel utilisateur

rollease acmeda

rollease acmeda S100 EXTREME SYSTEM Manuel utilisateur

rollease acmeda

rollease acmeda Zipscreen-Skylight Manuel utilisateur

rollease acmeda

rollease acmeda RB12 AERO-DUAL Manuel utilisateur

rollease acmeda

rollease acmeda KUMO Manuel utilisateur

rollease acmeda

rollease acmeda ZIPSCREEN Manuel utilisateur

rollease acmeda

rollease acmeda AUTOMATE MT01-1320-069001 Manuel d'installation

rollease acmeda

rollease acmeda CU40 Manuel utilisateur

rollease acmeda

rollease acmeda SS38 Manuel utilisateur

rollease acmeda

rollease acmeda MULTI-LINK Manuel utilisateur

rollease acmeda

rollease acmeda Zipscreen Extreme Manuel utilisateur

Manuels Store vénitien populaires d'autres marques

Jysk

Jysk ROGEN Manuel utilisateur

SOMFY

SOMFY 1241752 Manuel utilisateur

Rollos

Rollos S-Nanorollo V2 Guide de planification

Teptron

Teptron Move Manuel utilisateur

Renson

Renson Outdoor Loggia Guide de sécurité

Project Source

Project Source CDLF2342W Manuel utilisateur

Domondo

Domondo PureNight Manuel d'instructions d'installation

IKEA

IKEA KADRILJ Manuel utilisateur

Hallis Hudson

Hallis Hudson Rolls Super glide Manuel utilisateur

Benthin

Benthin P1614 Manuel utilisateur

MV LINE

MV LINE CLARA 015 Mode d’emploi

Current

Current E-WAND Mode d’emploi

weinor

weinor VertiTex ZipR Manuel

Roto

Roto ZAR M R4/R7 Manuel utilisateur

SOMFY

SOMFY Movelite WT Series Manuel utilisateur

Acmeda

Acmeda RF400 Series Manuel utilisateur

Motura

Motura Pli_353/3 Manuel utilisateur

Cosiflor

Cosiflor VS 2 Manuel utilisateur