Rockwell Automation PanelView Plus Series Manuel utilisateur

User Manual

Catalog Number 2711P

400, 600, 700, 1000, 1250, 1500

Terminals

PanelView Plus Terminals

Important User Information

Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines

for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local

Rockwell Automation sales office or online at http://literature.rockwellautomation.com) describes some important differences

between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the

wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves

that each intended application of this equipment is acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the

use or application of this equipment.

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and

requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability

for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or

software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is

prohibited.

Throughout this manual, when necessary, we use notes to make you aware of safety considerations.

Allen-Bradley, Rockwell Automation, and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

WARNING Identifies information about practices or circumstances that can cause an explosion in a

hazardous environment, which may lead to personal injury or death, property damage, or

economic loss.

IMPORTANT Identifies information that is critical for successful application and understanding of the product.

ATTENTION Identifies information about practices or circumstances that can lead to personal injury or death,

property damage, or economic loss. Attentions help you identify a hazard, avoid a hazard, and

recognize the consequence

SHOCK HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that

dangerous voltage may be present.

BURN HAZARD Labels may be on or inside the equipment, for example, a drive or motor, to alert people that

surfaces may reach dangerous temperatures.

3Publication 2711P-UM001I-EN-P - December 2008 3

Summary of Changes

The information below summarizes the changes to this manual since

the last revision.

Revision bars, as shown in the margin, identify updated information.

This document includes the following changes.

Topic Page

Corrected touchscreen stylus tip radius 15, 16, 21, 22, 88

Added catalog numbers for marine-certified terminals and added

OEM option to catalog number configuration diagram 23, 25

Updated series information for backlights 26

Added catalog number 2711P-RGB4 for antiglare overlay for

PanelView Plus 400 color keypad/touch terminal 27

Corrected temperature range around the terminals in Clearances 36

Corrected panel thickness range for lever position 1 38

Added battery type and disposal information 153

Added footnotes to tables regarding maximum cable length for

DH-485 modules 168, 169, 170

Modified connector pinout diagram 176

Corrected wiring connections and pinouts in Remote I/O & DH+

depictions

178, 182, 183

Added message about maximum cable length for DH-485

modules 178

Added battery disposal information to Maintenance chapter 228

Added environmental information for Airborne Contaminants 230

Updated EMC and LVD Directives 232

4Publication 2711P-UM001I-EN-P - December 2008

Summary of Changes

5Publication 2711P-UM001I-EN-P - December 2008 5

Table of Contents

Preface

Objectives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Additional Resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Software and Firmware Upgrades . . . . . . . . . . . . . . . . . . . . 10

Chapter 1

Overview

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

PanelView Plus 400 and 600 Terminals . . . . . . . . . . . . . . . . 12

PanelView Plus 700 to 1500 Terminals . . . . . . . . . . . . . . . . . 17

Catalog Number Configuration. . . . . . . . . . . . . . . . . . . . . . . 23

PanelView Plus Product Components. . . . . . . . . . . . . . . . . . 23

Chapter 2

Installation

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Hazardous Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Environment and Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . 34

Outdoor Installation for High-bright Displays . . . . . . . . . . . . 34

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Cutout Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Mount the 400 or 600 Terminal in a Panel . . . . . . . . . . . . . . 37

Mount the 700 to 1500 Terminal in a Panel . . . . . . . . . . . . . 39

Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Chapter 3

Power Connections

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Wiring and Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . . 47

Remove and Install the Power Terminal Block . . . . . . . . . . . 48

DC Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

AC Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Reset the Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Chapter 4

Configuration Mode

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Access Configuration Mode . . . . . . . . . . . . . . . . . . . . . . . . . 61

Load an Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Run an Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Application Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Terminal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Configure Communications . . . . . . . . . . . . . . . . . . . . . . . . . 67

Configure Network Information . . . . . . . . . . . . . . . . . . . . . . 72

Configure Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Manage Files on the Terminal . . . . . . . . . . . . . . . . . . . . . . . 78

6Publication 2711P-UM001I-EN-P - December 2008

Table of Contents

Modify Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Font Linking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Configure Keypad, Keyboard, or Mouse. . . . . . . . . . . . . . . . 86

Configure the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . 88

Configure Print Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Configure Startup Options . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Configure Startup Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

View and Clear the System Event Log . . . . . . . . . . . . . . . . 101

Display Terminal Information . . . . . . . . . . . . . . . . . . . . . . 102

Display FactoryTalk View ME Station Information. . . . . . . . 104

Modify the Date, Time, or Time Zone . . . . . . . . . . . . . . . . 105

Modify Regional Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Chapter 5

Windows CE .NET Operating

System

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Windows CE .NET Architecture . . . . . . . . . . . . . . . . . . . . . 113

Windows CE .NET Programs . . . . . . . . . . . . . . . . . . . . . . 114

Windows CE .NET Operating System . . . . . . . . . . . . . . . . . 115

PanelView Plus CE Memory. . . . . . . . . . . . . . . . . . . . . . . . 119

Control Panel Applications . . . . . . . . . . . . . . . . . . . . . . . . 121

Chapter 6

Install and Replace Components

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Component Compatibility for PanelView Plus CE Terminals 142

Component Compatibility for PanelView Plus Terminals. . . 142

Install RAM or Internal CompactFlash. . . . . . . . . . . . . . . . . 143

Install or Replace the Logic Module . . . . . . . . . . . . . . . . . . 144

Install or Replace a Communication Module. . . . . . . . . . . . 147

Replace the Display Module . . . . . . . . . . . . . . . . . . . . . . . 151

Replace the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

Replace the Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Replace the Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

Remove the Product ID Label . . . . . . . . . . . . . . . . . . . . . . 162

Replace the Keypad Legend Inserts . . . . . . . . . . . . . . . . . . 162

Use an External CompactFlash Card. . . . . . . . . . . . . . . . . . 165

Chapter 7

Terminal Connections

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167

Wiring and Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . 167

Logic Controller Cable Charts . . . . . . . . . . . . . . . . . . . . . . 168

Communication Port Isolation . . . . . . . . . . . . . . . . . . . . . . 171

USB Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172

Serial Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

Publication 2711P-UM001I-EN-P - December 2008 7

Table of Contents

Ethernet Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

DH-485/DH+/Remote I/O Module . . . . . . . . . . . . . . . . . . . 178

ControlNet Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184

DeviceNet Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

Chapter 8

Upgrade Firmware

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

Transfer Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

Create an ActiveSync Connection. . . . . . . . . . . . . . . . . . . . 193

Firmware Upgrade Wizard. . . . . . . . . . . . . . . . . . . . . . . . . 195

Upgrade Firmware with a CompactFlash Card . . . . . . . . . . 196

Upgrade Firmware with a Network (Ethernet) Connection . 200

Upgrade the Operating System (OS) . . . . . . . . . . . . . . . . . 206

Chapter 9

Troubleshoot the System

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

Isolate the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

Startup Information Messages . . . . . . . . . . . . . . . . . . . . . . 213

Startup Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214

Startup Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

Check Terminal Components. . . . . . . . . . . . . . . . . . . . . . . 216

Ethernet Connnection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

Application Does Not Run. . . . . . . . . . . . . . . . . . . . . . . . . 222

Configuration Mode Access . . . . . . . . . . . . . . . . . . . . . . . . 222

File System Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222

Advanced Diagnostics for CE Terminals . . . . . . . . . . . . . . . 223

System Identification Errors . . . . . . . . . . . . . . . . . . . . . . . . 224

Restart in Safe Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225

Chapter 10

Maintenance

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

Clean the Display Window . . . . . . . . . . . . . . . . . . . . . . . . 227

Disposal Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228

Appendix A

Specifications

Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229

Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229

Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230

Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232

Agency Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232

8Publication 2711P-UM001I-EN-P - December 2008

Table of Contents

Appendix B

Compatible USB Devices

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

Appendix C

Available Fonts for Terminal

Applications

Download Fonts to Terminal . . . . . . . . . . . . . . . . . . . . . . . 235

PanelView Plus CE Accessories CD . . . . . . . . . . . . . . . . . . 235

RSView Machine Edition Fonts CD. . . . . . . . . . . . . . . . . . . 236

Appendix D

Programmable Key Definitions

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Appendix E

Security Considerations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241

Index

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243

9Publication 2711P-UM001I-EN-P - December 2008 9

Preface

Objectives

This preface provides information on these topics.

•Intended audience

•Parts list

•Additional resources

•Software and firmware upgrades

Intended Audience

Use this manual if you are responsible for installing, operating, or

troubleshooting the PanelView Plus or PanelView Plus CE terminals.

No special knowledge is required to understand this manual or

operate the terminal. However, you must understand the functions

and operations of FactoryTalk View Machine Edition (ME)

applications that will run on the terminal. Consult the application

designer for this information.

Equipment installers must be familiar with standard panel installation

techniques.

Parts List

The PanelView Plus terminals are shipped with these items.

•Power terminal block

•FactoryTalk View ME runtime software, preloaded

•Mounting levers for 400 and 600 terminals, quantity eight

•Mounting clips for 700 to 1500 terminals, quantity four to eight

•Installation instructions

•Panel cutout template

Additional items are shipped with the PanelView Plus CE terminals.

•Windows CE .NET operating system preloaded with Terminal

Services and Internet Explorer

•PanelView Plus CE Accessory CD with utilities and software

development kit for C++

•Microsoft Windows CE license agreement

10 Publication 2711P-UM001I-EN-P - December 2008

Preface Preface

Additional Resources

For additional information, refer to these publications, that you can

download from http://literature.rockwellautomation.com.

You may also want to refer to:

•online help for FactoryTalk View Studio or RSLinx software.

•documentation for your controller.

Software and Firmware

Upgrades

To receive software updates (software serial number required) and

firmware upgrades for your terminal:

•call your local Rockwell Automation sales office or distributor.

•access http://support.rockwellautomation.com

Resource Description

DeviceNet Communications for PanelView Plus

Terminals User Manual, publication

2711P-UM004

Provides procedures for creating a

DeviceNet application to run on a

PanelView Plus terminal.

ControlNet Communications for PanelView Plus

Terminals User Manual, publication

2711P-UM003

Provides procedures for creating a

ControlNet application to run on a

PanelView Plus terminal.

Modbus Applications for PanelView Plus

Terminals User Manual, publication

2711P-UM002

Provides procedures for creating a

Modbus application to run on a

PanelView Plus terminal.

Wiring and Grounding Guidelines for PanelView

Plus Devices Technical Data, publication

2711P-TD001

Provides grounding and wiring

guidelines for PanelView Plus terminals.

Software Development Kit for PanelView Plus

CE Terminals User Manual, publication

2711P-UM005

Provides information for programmers to

develop CE applications for PanelView

Plus CE terminals.

Autres manuels pour PanelView Plus Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Rockwell Automation Terminal tactile

Rockwell Automation

Rockwell Automation Allen-Bradley 140G-N-ECM Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView Plus 2711P Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView Plus 7 Manuel utilisateur

Rockwell Automation

Rockwell Automation 2711C-F2M Manuel d'instructions

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView 5500 Manuel utilisateur

Rockwell Automation

Rockwell Automation SMC-Flex Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley MobileView 2711T-B10R1K1 Manuel utilisateur

Rockwell Automation

Rockwell Automation PanelView Plus Series Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley MobileView 2711T-T10I1N1-TC Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView 5310 Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView Plus 7 Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley 2711-TBDC Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView 5510 Series Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley5094-TB3 Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView 800 Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView 800 HMI Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView Plus Series Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley 1790P-T8BV8V Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView 800 Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley PanelView Plus 7 Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley 140G-N-EXT3 Manuel utilisateur

Rockwell Automation

Rockwell Automation 2711C-F2M Manuel utilisateur

Rockwell Automation

Rockwell Automation Allen-Bradley DeviceNet 193-DNCT Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur