Robustel R1520 Manuel utilisateur

Robustel R1520 Hardware Manual

RT056_HM_R1520 1/12

R1520

Hardware Manual

Version: 1.0.1

Date: Nov. 28, 2022

Robustel R1520 Hardware Manual

RT056_HM_R1520 2/12

Regulatory and Type Approval Information

Table 1: Toxic or Hazardous Substances or Elements with Defined Concentration Limits

Radio Specifications for Europe

RF technologies

2G, 3G, 4G, GNSS, Wi-Fi

Cellular Frequency*

4G: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/

B18/B19/B20/B25/B26/B28

LTE TDD: B38/B39/B40/B41

3G: WCDMA: B1/B2/B4/B5/B6/B8/B19

2G: GSM: B2/B3/B5/B8

Max RF power

33 dBm±2dB@GSM, 24 dBm+1/-3dB@WCDMA, 23 dBm±2dB@LTE, 18 dBm@Wi-Fi

*May vary on difference models.

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s) and Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the

device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation,

Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation

Name of

the Part

Hazardous Substances

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

(DEHP)

(BBP)

(DBP)

(DIBP)

Metal

parts

Circuit

modules

Cables and

cable

assemblies

Plastic and

polymeric

parts

Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is

below the limit requirement in RoHS2.0.

Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this

part might exceed the limit requirement in RoHS2.0.

Indicates that it does not contain the toxic or hazardous substance.

Robustel R1520 Hardware Manual

RT056_HM_R1520 3/12

est autorisée aux deux conditions suivantes :

(1) L’appareil ne doit pas produire de brouillage;

(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

FCC& IC Radiation Exposure Statement

This equipment complies with FCC and Canada radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your

body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Déclaration d’IC sur l’exposition aux radiations

Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des

environnements non contrôlés. Cet équipement doit être installé et utilisé à une distance minimum de 20 cm entre

l’antenne et votre corps.

Cet émetteur ne doit pas être installé au même endroit ni utilisé avec une autre antenne ou un autre émetteur.

Robustel R1520 Hardware Manual

RT056_HM_R1520 4/12

Simplified EU Declaration of Conformity

We, Guangzhou Robustel Co., Ltd. are located at 501, Building #2, 63 Yongan Road, Huangpu District, Guangzhou,

China, declare that this radio equipment complies with all applicable EU directives. The full text of the EU DoC is

available at the following internet address:

www.robustel.com/certifications/

Safety Information

General

- The router generates radio frequency (RF) power. When using the router, care must be taken on safety issues

related to RF interference as well as regulations of RF equipment.

- Do not use your router in aircraft, hospitals, petrol stations or in places where using cellular products is prohibited.

- Be sure that the router will not be interfering with nearby equipment. For example: pacemakers or medical

equipment. The antenna of the router should be away from computers, office equipment, home appliance, etc.

- An external antenna must be connected to the router for proper operation. Only uses approved antenna with the

router. Please contact authorized distributor on finding an approved antenna.

RF exposure

- This device meets the official requirements for exposure to radio waves. This device is designed and manufactured

not to exceed the emission limits for exposure to radio frequency (RF) energy set by authorized agencies.

- The device must be used with a minimum separation of 20 cm from a person’s body to ensure compliance with RF

exposure guidelines. Failure to observe these instructions could result in your RF exposure exceeding the applicable

limits.

Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open.

Router may be used at this time.

The symbol indicates that the product should not be mixed with general household waste but must be sent to

separate collection facilities for recovery and recycling.

The symbol indicates that the product meets the requirements of the applicable EU directives.

The symbol indicates that the product meets the requirements of the relevant UK legislation.

Related download link

Find more product documents or tools at:

www.robustel.com/en/documentations/

Robustel R1520 Hardware Manual

RT056_HM_R1520 5/12

Technical Support

Tel: +86-20-82321505

Email: support@robustel.com

Web: www.robustel.com

Document History

Updates between document versions are cumulative. Therefore, the latest document version contains all updates

made to previous versions.

Date

Firmware Version

Document Version

Change Description

July 6, 2022

5.0.0

1.0.0

Initial release.

Nov. 28, 2022

5.0.0

1.0.1

Added declaration for product.

Robustel R1520 Hardware Manual

RT056_HM_R1520 6/12

Overview

Robustel R1520 is a rugged cellular router can support 2G, 3G, and 4G LTE Cat 4 networks. It provides high-speed

wireless network bandwidth for devices through wireless connections to ensure stable wireless network

connections.

Package Checklist

Before commencing installation ensure your package has the following components:

Device

2PIN Terminal

Block

2x4PIN Terminal

Block

2x3PIN Terminal

Block

SIM Card Sticker

Cellular Antenna

(Optional)

Wi-Fi Antenna

(Optional)

Power Supply

(Optional)

Mounting Kit

(Optional)

Note: The accessories could be different on specific order.

Panel Layout(May vary on difference models)

Robustel R1520 Hardware Manual

RT056_HM_R1520 7/12

Interface Descriptions

1. Power Supply.2PIN 3.5mm Terminal Block

Description

Note

V+

Positive

9-36 VDC

Power Connection Diagram

V-

Negative

2. DI/DO、AI Interface

Note

Digital Input Positive

OUT

Digital Output Positive

Analog Input

IGND

Digital Input Negative

OGND

Digital Output Negative

AGND

Analog Input Signal Ground

Robustel R1520 Hardware Manual

RT056_HM_R1520 8/12

DI&DO Typical Connection Diagram

3. RS-232/RS-485

RS232

RS485

Description

TXD

Router →Devices

RTS

Router →Devices

GND

RS485 Signal Ground

RS485 Data+ (B)

RXD

Router ←Devices

CTS

Router ←Devices

SGND

RS232 Signal Ground

RS485 Data+ (A)

4. Reset Button

Feature

Operation

Reboot

Press and hold the RST button for 2~ 5 seconds under the operating status.

Restore to default

configuration

Press and hold the RST button for 5~10 seconds, the RUN LED starts blinking quickly, the router will restore to default

configuration.

Restore to factory

default settings

Once the operation of restoring default configuration is performed twice within one minute, the router will restore to factory

default settings.

Note: The more details please refer to RT123_SM_RobustOS Software Manual, 2.3 Factory Reset.

Robustel R1520 Hardware Manual

RT056_HM_R1520 9/12

5. USB Interface

Feature

Operation

Firmware upgrade

The USB interface can be used for batch firmware upgrades, but it cannot send or receive data with slave devices connected to

the USB interface. The user can insert a USB storage device, such as a U disk or a hard disk, at the USB interface. If there is a

configuration file or router firmware in the USB storage device, the router will automatically update the configuration file or

firmware. For details, please refer to "4.2.6 USB".

6. LED Indicator

Name

Color

Status

Description

RUN

Green

On, solid

Router is powered on (System is initializing)

On, blinking

Router starts operating

Off

Router is powered off

MODEM

Green

On, solid

Link connection is working

On, blinking

Data is sent and received

Off

Link connection is not working

USR

USR-OpenVPN

Green

On, solid

OpenVPN connection is established

Off

OpenVPN connection is not established

USR-IPsec

Green

On, solid

IPsec connection is established

Off

IPsec connection is not established

RSSI

Green

On, solid

Signal Level: Best Signal Level

Wireless module: 21-31dB (signal strength)

On, slow

blinking (1s)

Signal Level: Average Signal Level

Wireless module: 11-20dB (signal moderate)

On, fast

blinking

Signal Level: Abnormal Signal Level

Wireless module: 21-31dB (signal weak)

Off

No signal

WLAN

Green

On, solid

Wi-Fi is enabled and working properly

Off

Wi-Fi is disabled or not working properly

Note: You can choose the display type of USR LED. For more details, please refer to

RT123_SM_RobustOS Software Manual, Services > Advanced > System >System Settings > User LED Type.

7. Ethernet Ports. There are five Ethernet ports on R1520, including ETH0 (PoE-PD Optional), ETH1, ETH2, ETH3

and ETH4. Each has two LED indicators. The green one is a link indicator but the yellow one doesn’t mean

anything. For details about status, see the table below.

Ethernet LED Indicator

Status

Description

Link indicator

(Green)

On, solid

Connection is established

On, blinking

Data is being transferred

Off

Connection is not established

Robustel R1520 Hardware Manual

RT056_HM_R1520 10/12

Hardware Installation

1. SIM Card Installation. Insert the SIM cards into the device, then stick the sticker.

2. Antenna Installation. Rotate the antenna into the antenna connector accordingly.

①Cellular Antenna

②GPS Antenna

3. Terminal Block Installation. Insert the 2PIN 、2x3PIN 、2x4PIN terminal blocks into the interfaces connector,

then can connect the devices or sensors to the gateway via corresponding interfaces e.g. RS232/RS485,

DIDO...

Table des matières

Autres manuels Robustel Routeur réseau

Robustel

Robustel R2110 Manuel utilisateur

Robustel

Robustel GoRugged R3000 Lite Manuel utilisateur

Robustel

Robustel GoRugged R3000 Lite Guide de l'utilisateur

Robustel

Robustel GoRugged R3000 Lite Manuel utilisateur

Robustel

Robustel R1511 Manuel utilisateur

Robustel

Robustel GoRugged R2000 Manuel utilisateur

Robustel

Robustel GoFixed W800 Manuel utilisateur

Robustel

Robustel GoRugged R2000 Manuel utilisateur

Robustel

Robustel GoRugged R3000 Lite Instructions d'utilisation et d'entretien

Robustel

Robustel EV8100 Manuel utilisateur

Robustel

Robustel GoRugged R3000 Lite Manuel utilisateur

Robustel

Robustel C9200-4L Manuel utilisateur

Robustel

Robustel GoRugged R2000 Manuel utilisateur

Robustel

Robustel EG5200 Manuel utilisateur

Robustel

Robustel R2110 Manuel utilisateur

Robustel

Robustel GoRugged R3000 Lite Manuel utilisateur

Robustel

Robustel GoRugged R2000 Manuel utilisateur

Robustel

Robustel GoRugged R3000 Lite Manuel utilisateur

Robustel

Robustel GoRugged R2000 Manuel utilisateur

Robustel

Robustel GoRugged R3000 Lite Manuel utilisateur

Robustel

Robustel R5020 Manuel utilisateur

Robustel

Robustel R3000-3P Manuel utilisateur

Robustel

Robustel R3000-3P Manuel utilisateur

Robustel

Robustel R1500 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité