Page
4
INTRODUCTION
Congratulations on your purchase of this quality Roband®product. With
proper care and management your new purchase will give you years of
trouble free service.
By reading these instructions carefully you can ensure that this machine is
used and maintained properly, helping your new investment to perform well
for you now, and to continue performing in the many years to come.
GENERAL PRECAUTIONS
This machine must only be operated by qualified person(s) who are fully
versed in the operating and safety instructions described in this manual.
Servicepersons should be instructed to familiarise themselves with any and
all safety instructions described in this manual prior to commencement of any
maintenance or service.
In the case of new personnel, training is to be provided in advance. These
machines should not be operated by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience or
knowledge, unless they have been given supervision or instruction
concerning the safe use of the appliance by a person responsible for their
safety.
When moving the mixer, only hold or lift it by the body itself. Do not carry or
move the mixer by holding the motor spindle or the motor housing. The motor
spindle is aligned with a tolerance of 0.025mm before leaving the factory to
ensure trouble free mixing and long motor bearing life.
The performance of this unit cannot be guaranteed for operational use
outside its design parameters.
The machine should be disconnected from all power before cleaning.
Roband will accept no liability if;
♦ Non-authorised personnel have tampered with the machine.
♦ The instructions in this manual have not been followed correctly.
♦ Non-original spare parts are used.
♦ The machine is not cleaned correctly, with the right product.
♦ There is any damage to the unit.
♦ The machine has been modified in any way.
