ROBAND DM21B series Manuel utilisateur

Instruction Manual

DRINK MIXERS

DM31

Version 1

CONTENTS

Product Features 2

Specifications* 2

Parts Included 2

Safety Instructions 2

Cleaning & Maintenance 3

Installation 3

Operation 4

Troubleshooting 5

Spare Parts 5

Circuit Diagram 6

Warranty 7

PRODUCT FEATURES

Powerful two speed motor, 18,000 rpm on

low and 22,000 rpm on high speed

High performance stainless steel beater for

use with milk and ice cream

Saturn beater for extra fluffy milkshakes

Internally sealed two peed on/off switch

Easy Clean base in case of any spillage

Takes standard 710ml. (24fl.oz.) cups

Includes stainless steel cup

Removable easy clean cup holder / switch

actuator

SPECIFICATIONS*

Model

Power

Watts

Size (mm)

Weight

DM31

150W @ 230V

180

220

485

4.2

*Specifications subject to change

PARTS INCLUDED

One Drink Mixer (appropriate model)

Universal beater

Saturn beater

One Stainless Steel Mixing Cup

Power cord

Instruction Manual

Any damage to the appliance as a result of

freight must be reported to the freight company

and to the agent responsible for the despatch of

the appliance within 24 hours of receipt. No

claims will be accepted after this period.

SAFETY INSTRUCTIONS

Read all Instructions and safety warnings prior to

use. Keep user manual for future reference.

Service and repair should only be performed by

qualified technicians who have read and

understand this manual.

Personnel must be trained prior to operating

this appliance.

This product is suitable for commercial use only.

This appliance should not be operated by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience or knowledge, unless they have

been given supervision or instruction concerning

the safe use of the appliance by a person

responsible for their safety.

Keep out of reach from children.

Always disconnect the appliance from all power

before cleaning or servicing.

Regularly inspect the electrical supply cord and

plug and discontinue use immediately if

damage is found. Return to manufacturer or

authorised repairer for repair prior to use.

This appliance contains no user-serviceable

parts. Roband Australia, one of our agents, or a

similarly qualified person(s) should carry out

repairs.

Keep cord away from heated surfaces.

Do not remove any cover panels from the

appliance.

Never place your hand or any other object into

the cup while in operation.

Do not use anything other than a recommended

cup or collar to activate the switch.

Roband will accept no liability if:

Non-authorised personnel have tampered

with the appliance

The instructions in this manual have not

been followed

Non-original spare parts are used

The machine is not cleaned correctly, with

the right product

There is any damage to the unit

The machine has been modified in any

way.

CLEANING & MAINTENANCE

CAUTION: Disconnect before cleaning.

CAUTION: Steel cutting processes used in the

construction of this appliance can result in sharp

edges. Avoid contact with sharp edges during

cleaning and maintenance.

CAUTION: Do not carry or move the mixer by

holding the motor spindle or the motor housing.

Do not clean with the use of a water jet or

immerse in water.

Do not use caustic or abrasive cleaning products

as they will damage the appliance.

Do not use chloride based cleaners or

“Sanitizers” on these machines.

Wipe all surfaces of the appliance with warm

soapy water and a damp non-abrasive cloth.

The Drink Mixer should be cleaned after each

use.

Clean the motor spindle by placing warm water

in the cup and then mixing it is recommended

to do this after each use.

Several times each day remove the Cup holder /

Actuator and wash in warm soapy water to

maintain smooth operation.

INSTALLATION

Remove all packaging materials, tape, and any

protective plastic from the appliance. Remove

any glue residue from the protective plastic or

tape using citrus cleaner.

Plug the IEC power connector into the base of

the unit ensuring the cordset retainer is clipped

in place retaining the plug

Position the cup holder / actuator as shown by

locating the cut outs in the back over the

screws; internal magnets will retain the cup

holder / actuator in the correct position. Check

operation by lifting the top cup hook up and

then releasing it; the magnets should pull the

cup holder / actuator back down to rest on the

lower cup support

Place the product on a firm, level surface in the

desired position.

Before connecting the appliance to the power

supply, ensure that all switches are in the OFF

position.

We recommend the use of an RCD (Residual

Current Device) rated at not less than 30mA for

circuit protection when using these units.

OPERATION

1. Plug into a standard, single phase power

point

2. The unit is operated by a 2 step system:

First, select the desired setting on the

Control Switch by pressing the switch to

either the LOW SPEED ( I ) position or HIGH

SPEED ( II ) position.

3. Next, place the ingredients to be mixed into

the supplied mixing cup or a standard 710ml

(24fl.oz.) milkshake cup, then feed the cup

over the mixing spindle and beater then

place the rim of the cup behind the top

hook of the cup holder / switch actuator. Lift

the cup up to start the mixing process. If

desired the bottom of the mixing cup can be

placed over lower cup support for hands

free mixing. Ensure that the top and bottom

rim of the cup are securely hooked so that

the cup will not slip during use

4. After the desired mixing duration, remove

the cup by first lifting and unclipping the

bottom of the mixing cup then lowering the

cup to release it from the upper cup support

clip. Wait for the mixer spindle and beater to

stop rotating before removing the cup

completely this will prevent mixture from

being thrown off the beater. The mixer is

designed to work best with a fluid volume of

180ml to 210ml. Increasing this volume

could cause product to be thrown from the

cup during mixing leading to possible

electrical problems

5. Cups smaller than 710ml (24fl.oz.) cannot be

used as they will not be tall enough to

engage the cup holder and lift it to start the

mixer.

6. The mixer comes fitted with a two piece

stainless steel Universal beater and a

moulded plastic Saturn beater as an

accessory. The two piece stainless steel

Universal beater is designed for best

performance when mixing combinations of

milk and soft ice cream. Removing the top

slotted disk and only using the lower plain

disk gives good results with milk only

shakes. The Saturn beater is best to produce

a thick fluffy milk only shake.

Notes to user: These units are not blenders

and will not make thick shakes from chunks

of frozen ice cream. To make a thick shake, it

is required that soft serve or soft ice cream

be used.

An important tip to remember is that the

colder the milk used, the thicker the shake.

Additionally, light milk and skim milk will

froth more than full-cream milk.

CHANGING BEATER HEADS

To remove a mixer head hold the mixer spindle

firmly and unscrew the beater by turning

clockwise when looking down on the beater.

To fit a new beater or beater assembly,

assemble the parts in the desired order then

hold the mixer spindle firmly and screw the

assembly to the spindle by turning it in an

anticlockwise direction note when installing the

Saturn beater for the first time it will need to be

pushed up at the same time as rotating it

anticlockwise when looking from the top.

TROUBLESHOOTING

If the Drink Mixer does not function check the

following points before calling for service.

The appliance is plugged in correctly and

the power switched on.

The IEC plug is pushed firmly into its socket

and retaining clip firmly in place

The on off / speed control switch has is not

set in the OFF position

The power point is not faulty.

The cup actuates the switch correctly.

Select the alternative speed setting.

If the drink mixture is thrown out of the mixer

cup

Check the speed setting

Check that the cup has not been overfilled

Check that the ice cream is not hard

SPARE PARTS

EC0267 Australian / NZ Plug & Cord 7.5

A - 3 Pin to IEC Appliance Socket

1.8m Black

ES0358 Motor and Spindle Assembly Kit

MS0585 Universal Beater

PC0354 Saturn Beater

VC0046 Cup holder / switch actuator

WA132 Stainless steel mixer cup

ES0408 On/Off speed control switch

assembly

CIRCUIT DIAGRAM

WARRANTY

The warranty conditions set out below are in addition to any warranties implied or governed by law.

Roband Australia warrants that this appliance shall be delivered free from defects in material and

workmanship. The warranty for this product is offered to the original purchaser, to be free of fault in both

workmanship and materials for a period of 12 months from date of purchase. Roband’s obligations pursuant

to this warranty are limited to the repair or replacement of the defective goods or materials, at its discretion

and subject to the terms contained within this Warranty statement.

The following conditions apply:

The product must be installed, maintained and used under normal operating conditions within the scope of

the operating instructions.

All warranty claims must be submitted to Roband or an authorised Roband dealer, and Roband authorisation

must be granted prior to repairs being carried out. Proof of purchase is required for any repair authorisation.

Warranty is back to base, meaning delivery to and collection of your product to Roband or an authorized

service agent is the responsibility of the purchaser.

Where a product cannot be returned back to base, on-site warranty can be arranged by prior agreement.

The following exclusions apply:

Claims or faults arising from misuse, neglect, transport damage or other mechanical damage, including but

not limited to; door’s, hinges & interlock switches etc., other than those arising from manufacture or material

defects. Where relevant, glass, Teflon® and lamps are not included in this warranty and RCD tripping due to

moisture absorption by Tubular Heating Elements is not a warranty fault.

Roband or any subsidiary company or Agent shall not be liable for loss of profit or damage to other

equipment and property except where it is in breach of the guarantees provided in accordance with

applicable legislation.

Roband reserves the right to reject a warranty claim if it is not satisfied with the circumstances under which the

fault occurred or where a product has been altered from its original specification.

For on-site repairs outside of capital city metropolitan areas, travel costs, service callout fee and related

labour costs etc. are the responsibility of the claimant.

Any costs incurred for false claims or faults due to incorrect usage etc. are the responsibility of the claimant.

Any attempt to repair the product by non-Roband approved service personnel or the use of non-genuine

parts will void the warranty agreement

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to a major failure.

For the name of your nearest Australian authorised service agent, please contact:

Roband Australia Pty Ltd

1 Inman Road,

Cromer, NSW, 2099, Australia

Warranty: 1800 268 848

Tel: +61 2 9971 1788

Fax: +61 2 9971 1336

Email: [email protected]

Web: www.roband.com.au

For your nearest International distributor,

please visit:

https://www.roband.com.au/worldwide/

4/06/2021

electronic or mechanical, including photocopying or posting to a website, without the written permission

of the publisher. The material contained within this document is intended entirely for instructional

Purposes. Roband®Australia is a wholly Australian owned company and has been manufacturing quality

commercial catering equipment for the food service industry for more than 60 years.

Autres manuels pour DM21B series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ROBAND Mixer

ROBAND

ROBAND DM21W series Manuel utilisateur

ROBAND

ROBAND DM21B series Manuel utilisateur

ROBAND

ROBAND DM21R series Guide de démarrage rapide

ROBAND

ROBAND DM21W series Manuel utilisateur

Manuels Mixer populaires d'autres marques

Bosch

Bosch GRW 9 Manuel utilisateur

MULTIQUIP

MULTIQUIP Whiteman WM45E Mode d’emploi

KitchenAid

KitchenAid KSM7581BZ0 Guide rapide

Jay-Lor

Jay-Lor 5050 Manuel utilisateur

Sunbeam

Sunbeam FPSBSM210X Manuel utilisateur

MULTIQUIP

MULTIQUIP Whiteman MC94S Mode d’emploi

Thinky

Thinky ARE-250 Manuel utilisateur

Midas

Midas XL4 Manuel utilisateur

bianco

bianco PURO 4 Manuel utilisateur

Paso

Paso DAG9200 Manuel utilisateur

Sima

Sima SFX-9A Manuel utilisateur

better chef

better chef IM-815WC Instructions d'installation

ALLEN & HEATH

ALLEN & HEATH GR1 Manuel utilisateur

Lacor

Lacor 69083 Fiche technique

M-Audio

M-Audio Midiman SAM Manuel utilisateur

Buffalo

Buffalo CP921 Manuel utilisateur

Pentair

Pentair HYPRO Cleanload 3376-0870 Instructions de fonctionnement

Cuisinart

Cuisinart SM50WHE Manuel utilisateur