Press the Power button to back out of sub menus without making changes to the settings.
Note: While in the settings menu or sub menus, pressing the photo, video record, or audio
record button, will return you to the main LCD view screen.
Page 5
Menu Options
●The number of menu settings is located in the top right of the rear screen indicating a number out of 30
depicting which menu option you are on.
●1/30: Video resolution. Options are 2560x1440 30P, 2304x1296 30P, 1920x1080p 30p, 1440x1080p 30P, 1280x720 30P and 848x480
30P2/30:
●2/30: Coding Format - H.264 or H.265 (recommended and defaulted to this setting)
●3/30: Quality - Normal,Fine, Super Fine
●4/30: Pre-record - on/off - records 10 seconds prior to hitting video button
●5/30: Post-record - on/off - continues recording 10 seconds after video turned off
●6/30: Auto-record - on/off - once the camera is powered on it will automatically start recording.
●7/30: Loop Record -on/off - highly recommended to leave off or video might be overwritten thus losing the video photos.
●8/30: Split Time - Automatically splits video recordings into segments of set times to more easily manage recordings.
○ Each segment will be a separate media file. Options are off and 1, 3, 5, 10, 15, 30, and 45 minutes. 15 minutes is recommended.
●9/30: Photo Resolution: - This means setting the size of the photo or video. Options are 5M, 12M, 20M, 25M, 30M, and 40M
●10/30: Burst on/off : Options are 2, 3, 5, 7, 10, 15, and 20. (Burst on allows you to snap multiple photos at once upon pressing the photo
button).
●11/30: Self Timer allows for a timed delay before a photo is taken. Options are 5 and 10 seconds.
●12/30: Slide Show - When viewing a photo file in Playback mode in photo files tab, photos will automatically be scrolled through.
●13/30: Infrared - Manual or Automatic: While under dark circumstances, infrared LED will help record clear image or video in HD.
○Auto: In low light situations (3 Lux), 4 IR LED will be turned on automatically, camera switches to infrared filter lens, video image
turns black and white. When brightness increases again, the IR LED turns off, and image becomes colorful again.
○Manual: When night vision is needed, Press the Flashlight/Infrared button to switch to infrared mode, 4 IR LED will be turned on,
video image will turn black and white. When night vision is no longer needed press the IR button to switch out of night vision.
●14/30: Motion Detection - on/off - if this is in the on setting, once there is movement felt by the camera, it will automatically start recording.
●15/30: Record Warning - the voice/vibrating that advises the user that video recording has been activated. Options are On/Off.
●16/30: GPS - on/off - Having GPS on provides a connection to the GPS satellite as to view location of where the videos/photos and audio
recordings were taken, location, speed, direction of travel, time date stamp. Review can be done on a cell phone, tablet or computer.
Recommended to have it on (default is off).
○A grey satellite is located at the top/middle of the viewing screen indicating the gps is either off or not connected. A green satellite
image indicates that the gps is connected. To ensure a good connection, keep from being in areas that prevent satellite
connection.
○It may take up to 10 minutes to initiate the gps connection for the first time.
●17/30: Wifi - on/off. Allows connection between cell phone or tablet to provide the current external view of the camera. The range for the
Wifi is 3-4 metres. This is not remote viewing.
●18/30: TimeZone - This setting allows to change the time zone the camera is set for. Default is set for GMT (Greenwich Mean Time).ie; PST is
-7, EST is -4.
●19/30: Language - Allows the user to switch the language of the device.
